MUKUL SHUKLA
Professor & Head
Department of Mechanical Engineering
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: mukulshukla[at]mnnit[dot]ac[dot]in
Telephone: +91-532-2271513(O) +91-8770884430(M)
Thesis Supervised
| S.No | Research Topic | Name of Student | Completion/Registration Year | Ph.D. Completed: |
|---|---|---|---|
| 1 | Abrasive water jet cutting of continuous fiber reinforced polymer composites: Experimental studies, modeling and multi-objective optimization | Dr. T. U. Siddiqui | 2010 |
| 2 | Mechanical Properties of Carbon Fiber / Functionalized Multi-walled Carbon Nanotubes / Epoxy Multiphase Composites: Modeling, Simulation and Characterization | Dr. Kamal Sharma | 2014 |
| 3 | Simulation of Mould Filling in Vacuum Enhanced Resin Infusion Technology (VERITy) Fiber Composites Manufacturing Process | Dr. Ajay Kumar | 2014 |
| 4 | Pulsed Laser Deposition and Magnetic Sputtering Biocoatings for Orthopaedic Implants | Dr. Ashish Das | 2017 |
| 5 | Laser Additive Manufacturing of Maraging Steel and Titanium-Molybdenum alloy | Dr. Tarun Bhardwaj | 2019 |
| 6 | Development of Polylactic Acid / Nano – Magnesium Oxide based Biocomposite Films for Food Packaging Applications | Dr. Chetan Swaroop | 2019 |
| 7 | Characterization of Laser Metal Deposition of Functionally Graded Titanium Alloy Composites | Dr. Rasheedat M. Mahamood | 2014 |
| 8 | Development of Elephant Grass Fiber Composites: Preparation, Properties and Applications | Dr. V. P. Kommula | 2014 |
| 9 | Refined Waste Tyre Pyrolysis Fuel as Diesel Additive for Compression Ignition Engines | Dr. T. J. Pilusa | 2014 |
| 10 | Laser Assisted Cold Spraying | Dr. Monnamme Tlotleng | 2015 |
| 11 | Experimental Study and FEM Modeling of Laser Beam Formed Steel for Enhanced Structural Integrity | Dr. Stephen A. Akinlabi | 2016 |
| 12 | Lattice Design and Additive Manufacturing of TPMS Bio scaffolds | Mr. Yogesh Tripathi | 2023 | Ph.D. Ongoing |
| 1 | Fracture and Fatigue Studies on Hybrid Glass-Kenaf Epoxy Composites | Mr. Rajneesh K Verma | 2015 |
| 2 | Corrosion and Wear Studies of DMLS Titanium | Mr. Amit K Singh Chauhan | 2016 |
| 3 | Machine Learning based Process Monitoring of Metal Additive Manufacturing | Mr. Anuj Kumar | 2019 |
| 4 | Machine Learning application in Fracture | Harsh Kumar Bhardwaj | 2021 |
| 5 | Porous EV Battery electrodes | Mr. Alok Mishra | 2022 | M.Tech Students |
| 1 | AI based detection of pulmoary diseases | Mayank Mayookh | 2021 |
| 2 | A Machine Learning based modeling approach for prediction of rail track defects | Farheen Nisha | 2021 |
| 3 | CFD analysis of 2 tier AC train coach to reduce the transmission of infection | Jay S Kachhadiya | 2021 |
| 4 | Evaluation of Metal Laser Additive Manufacturing using Machine Learning | Subham Raj Anand | 2021 |
| 5 | FEM based rail wheel analysis with track assuming elastic foundation | Aniket Raj | 2021 |
| 6 | Development of a 3D printed orthopaedic cast for wrist fracture | Md. Ahad Islam | 2020 |
| 7 | Design and Development of lower limb (Above knee) Prostheses | Ankit Verma | 2020 |
| 8 | Thermo-mechanical and fatigue simulation of additively manufactured metal alloys | Sudhakar Singh | 2019 |
| 9 | Design of a human safety device for frontal impact of locomotive | Naveen Kumar | 2019 |
| 10 | Design and fabrication of manual brick carrying device for construction site | Aniket Kumar | 2019 |
| 11 | Fatigue and fracture studies in 3D printed composites | Andrew Scott | 2018 |
| 12 | Design for Metal Additive Manufacturing | Joseph Davey | 2018 |
| 13 | 3D Printing and Characterization of Commercial Filaments for Radiotherapy Phantom Applications | Paul Armstrong | 2018 |
| 14 | CAD, FEA and Additive Manufacturing of coronary heart stent | Sumit Ghosh | 2017 |
| 15 | Lattice Design for Additive Manufacturing of Orthopaedic Implants | S P Singh | 2017 |
| 16 | FEM based Damage analysis of Kenaf-Epoxy Composites | Vivek Patel | 2017 |
| 17 | Rubber tyre design using FEM | Tarun Singh | 2017 |
| 18 | Multi-physics Comsol and LIMS based Simulation studies in VARTM Composites Manufacturing | Sumit Shukla | 2016 |
| 19 | Multi-physics FE Modeling and Analysis of Direct Laser Metal Deposition | Manish Dwivedi | 2016 |
| 20 | Finite Element Analysis of Void and Resin Flow in VARTM | Abhinav Tripathi | 2015 |
| 21 | Thermo-mechanical Finite Element Analysis of Multi layer Laser Metal Deposition | Saurav Kumar | 2015 |
| 22 | Finite Element Modeling of Laser Metal Deposition | Vaibhav Verma | 2014 |
| 23 | Hemispherical Deep Drawing Sheet Hydroforming – Setup Fabrication, Experimentation and Finite Element Simulation (Co-supervisor) | Tarun Bhardwaj | 2014 |
| 24 | Finite Element Analysis of Composite Tower and Nacelle for Wind Turbine | Sanjeev Kumar | 2014 |
| 25 | Finite Element Analysis of Rubber Tire | Yugesh M Tiwari | 2014 |
| 26 | FEA Simulation of Abrasive Waterjet Machining | Naresh K Jangra | 2010 |
| 27 | FE Analysis of CNT reinforced Polymer Nanocomposites | Chetan V Badiger | 2010 |
| 28 | MD Simulation of Polymer Nanocomposites (Co-supervisor) | Kuldeep Kr. Saxena | 2010 |
| 29 | Dynamic Analysis of Passenger Rail Wagon using Adams/Rail | Anuj Anand | 2009 |
| 30 | Structural Optimization of Freight Rail Wagon | Apoorva Sharma | 2009 |
| 31 | FEM Analysis of FRP Strengthening of RCC beams (Co-supervisor) | Brij Kishore | 2009 |
| 32 | Finite Element Analysis of CNTs and CNT Nanocomposites | Piyush Patel | 2008 |
| 33 | Fabrication and Mechanical Characterization of Polymer Nanocomposites | D Madhava Reddy | 2008 |
| 34 | Static Finite Element Analysis and Dynamic Analysis of Freight Hopper Wagon | Chetan Shah | 2008 |
| 35 | Material Characterization of Life Expired Composite Prepregs (Co-supervisor) | J Prasad | 2007 |
| 36 | Design of lightweight FRP rail wagon | Mr Rishi Gautam | 2023 |
| 37 | Design and Bio-printing of Polymeric and Ceramic Bio Scaffolds | V Srikar | 2023 |
| 38 | Development of Portable Xray Radiograph | Mr Geetendra Raj | 2023 |
| 39 | Real time monitoring of ash fouling and intelligent soot blowing in coal fired thermal power plant | Ravi Kumar | 2022 |
| 40 | Electro-chemo-thermal modelling and analysis of a lithium-ion battery pack | Poonam Singh Jeena | 2022 |
| 41 | Design of functionally graded scaffolds for orthopaedic applications | Ranjan Bora | 2022 |