Professor & Head
Department of Mechanical Engineering
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: mukulshukla[at]mnnit[dot]ac[dot]in
Telephone: +91-532-2271513(O) +91-8770884430(M)
Patent Title: 3d Printed Orthopedic Cast and its Biomedical Application Thereof; Name of Applicant(s): Sharma K., Islam M A, Shukla M.; Patent No.: 202111059553; Agency/ Country: GLA Mathura and MNNIT Allahabad / India; Status: Published
Patent Title: Portable Photovoltaic Power Bank with Built-In Illumination Unit;
Name of Applicant(s): Sharma A, Sharma K., Shukla M.;
Patent No.: 202111050413;
Agency/ Country: Self, GLA Mathura and MNNIT Allahabad / India;
Status: Published
Patent Title: UV-C Invertible, Double Deck, Mesh Conveyor Disinfection System;
Name of Applicant(s): Sharma K., Shukla M., Yadav B.;
Patent No.: 202011020533;
Agency/ Country: GLA Mathura and MNNIT Allahabad / India;
Status: Published
Patent Title: A Portable Diagnostic System for a Medical Condition Using X-Ray Imaging of Lungs;
Name of Applicant(s): M Shukla, M Mayookh, S Saraswati, P K Agarwal;
Patent No.: 202011031404;
Agency/ Country: MNNIT Allahabad / India;
Status: Published
Patent Title: Process for the manufacture of a titanium composite;
Name of Applicant(s): R. M. Mahamood, E. T. Akinlabi, M. Shukla, S Pityana;
Patent No.: 2014/03117;
Agency/ Country: University of Johannesburg/ South Africa;
Status: Published
Patent Title: Fuel Filter;
Name of Applicant(s): J. T. Pilusa, E. Muzenda, M. Shukla;
Patent No.: 2014/06996; Agency/ Country: University of Johannesburg/ South Africa; Status: Published
Books:
"Concepts of Engineering Design", BTech 1st year textbook, Publisher - Notion Press, Chennai, May 2016.
Book Chapter:
R. M. Mahamood, E. T. Akinlabi, M. Shukla and S Pityana, “Improving Surface Integrity using Laser Metal Deposition Process”, in "Additive Manufacturing: Breakthroughs in Research and Practice", Publisher - IGI Global, USA, pp. 220-244, 2020.
M. Tlotleng, E. T. Akinlabi, M. Shukla and S Pityana, “Application of Laser Assisted Cold Spraying Process for Materials Deposition”, in “Surface Engineering Techniques and Applications: Research Advancements”, Publisher - IGI Global, USA, pp. 177-221, 2014.
R. M. Mahamood, E. T. Akinlabi, M. Shukla and S Pityana, “Improving Surface Integrity using Laser Metal Deposition Process”, in “Surface Engineering Techniques and Applications: Research Advancements”, Publisher - IGI Global, USA, pp. 146-176, 2014.
R. M. Mahamood, M. Shukla and S Pityana, “Laser Additive Manufacturing in Surface Modification of Metals”, in “Surface Engineering Techniques and Applications: Research Advancements”, Publisher - IGI Global, USA, pp. 222-248, 2014
M. Shukla, “Abrasive Water Jet Milling”, in “Nontraditional Machining Processes", ISBN: 978-1-4471-5178-4, Publisher - Springer, pp. 177-203, 2013.
T. U. Siddiqui and M. Shukla, “Modeling and Optimization of Abrasive Water Jet Cutting of Kevlar Fiber-Reinforced Polymer Composites”, in “Computational Methods for Optimizing Manufacturing Technology - Models and Techniques", ISBN - 978-1466601284, Published by IGI Global, USA, pp. 262-286, 2012.
S. A. Akinlabi, M. Shukla, E. T. Akinlabi and T. Marwala, “Lasers in Metal Forming applications”, in "Lasers in Manufacturing", ISBN - 978-1-84821-369-2, Published by ISTE-Wiley, UK, pp. 69-108, 2012.
T. U. Siddiqui, M. Shukla and P. B. Tambe, “Optimisation of Process Parameters for Abrasive Water Jet Machining of Kevlar-Epoxy Composites Using Taguchi Method and Response Surface Methodology”, in “Advances in Manufacturing Technology”, ISBN - 978-81-7371-755-0, Published by Universities Press (India) Pvt. Ltd., 2012.
K Kumar, A Das, M Shukla and S B Prasad, “Improved biodegradable implant materials for orthopaedic applications”, Abstract accepted in CRC Press book "Advanced Materials for Bio-Mechanical Applications", 2021.
Journals:
T. U. Siddiqui, M. Shukla and P. B. Tambe, “Optimization of Surface Finish in Abrasive Water Jet Cutting of Kevlar Composites Using Hybrid Taguchi and Response Surface Method”, International Journal of Machining and Machinability of Materials, ISSN: 1748572X, Vol. 4, No. 3 & 4, pp. 382-402, 2008.
N. Chand, M. Shukla and M. K. Sharma, “Analysis of Mechanical Behaviour of Bamboo (Dendrocalamus Strictus) using FEM”, Journal of Natural Fibers (SCI) – IF - 1.07, ISSN: 1544-0478, Vol. 5, No. 2, pp. 127-137, 2008.
V. Kumar, J. Ram Kumar, S. Aravindan, S. K. Malhotra, K. Vijai, M. Shukla, “Fabrication and characterization of ABS nano composite reinforced by nano sized alumina particulates”, International Journal of Plastics Technology, Vol. 13, No. 2, pp 133-149, 2009.
M. Shukla and P. B. Tambe, “Predictive Modeling of Surface Roughness and Kerf Widths in Abrasive Water Jet Cutting of Kevlar Composites Using Neural Network”, International Journal of Machining and Machinability of Materials, ISSN: 1748572X, Vol. 8, No. 1 & 2, pp. 226-246, 2010.
T. U. Siddiqui and M. Shukla, “Modeling of Depth of Cut in Abrasive Water-jet Cutting of Thick Kevlar-Epoxy Composites”, Key Engineering Materials, (Scopus journal), ISSN: 1013-9826, Vol. 443, pp. 423-427, 2010.
M. Shukla, A. K. Singh, N. N. Kishore and S. G. Dhande, “Towards Rapid Manufacturing of Angled Autoclaved Composite Laminates with Minimized Springin: A Taguchi Experiments and Finite Element Analysis Based Approach”, International Journal of Rapid Manufacturing, ISSN: 1757-8817, Vol. 1, No. 4, pp. 390-407, 2010.
T. U. Siddiqui and M. Shukla, “Experimental Investigation and Optimization of Kerf Characteristics in Abrasive Water-jet Trepanning of Thick Kevlar-Epoxy Composites”, Journal Proceedings in Manufacturing Systems, Vol. 5, No. 2, pp. 109-112, 2010.
S. Akinlabi, T. Marwala, E. Akinlabi and M. Shukla “Effect of Scan Velocity on Resulting Curvatures During Laser Beam Bending of AISI 1008 Steel Plates”, Advanced Materials Research, (Scopus journal), Vols. 299-300, pp 1151-1156, 2011.
T. U. Siddiqui and M. Shukla, “Abrasive Water-jet Hole Trepanning of Thick Kevlar-Epoxy Composites for Ballistic Applications – Experimental Investigations and Analysis Using Design of Experiments Methodology”, International Journal of Machining and Machinability of Materials, ISSN: 1748572X, Vol. 10, No. 3, pp. 172-186, 2011.
P. B. Tambe and M. Shukla, "Genetic Algorithm Based Optimization of Material Removal Rate of Abrasive Water-jet Cutting of Polymer Composites", Asian International Journal of Science and Technology of Progress in Manufacturing Engineering Vol. 4, No. 2, pp. 37-42, 2011.
K. ObiReddy, C. U. Maheshwari, M. Shukla and T. Varadarajulu, “Chemical Composition and Structural Characterization of Napier Grass Fibers”, Materials Letters (SCI) – IF - 3.01, https://doi.org/10.1016/j.matlet.2011.09.027 Vol. 67, Issue 1, pp. 35-38, 2012.
K. Sharma and M. Shukla, “Experimental Study of Mechanical Properties of Multiscale Carbon Fiber-Epoxy-CNT Composites”, International Journal of Advanced Materials Research, (Scopus journal), Vols. 383-390, pp. 2723-2727, 2012.
N. Kumar and M. Shukla, “Finite Element Analysis of the Effect of Multiple Abrasive Particle Impact on Erosion Behaviour of Titanium Alloy in Abrasive Water Jet Machining”, Journal of Computational and Applied Mathematics (SCI) – IF – 1.88, https://doi.org/10.1016/j.cam.2012.04.022 Vol. 236, No. 18, pp. 4600-4610, 2012.
K. ObiReddy, M. Shukla, C. U. Maheshwari and T. Varadarajulu, "Evaluation of Mechanical Behavior of Chemically Modified Borassus Fruit Short Fiber/Unsaturated Polyester Composites", Journal of Composite Materials (SCI) – IF – 1.75, ISSN: 0021-9983, Vol. 46, No. 23, pp. 2987-2998, 2012.
K. Sharma, K. K. Saxena and M. Shukla, “Effect of Number of Stone-Wales and Vacancy Defects on the Mechanical Behavior of Carbon Nanotubes Using Molecular Dynamics”, Procedia Engineering, ISSN: 1877-7058, Vol. 38, pp. 3373 – 3380, 2012.
K. ObiReddy, M. Shukla, C. U. Maheshwari and T. Varadarajulu, “Mechanical and physical characterization of sodium hydroxide treated Borassus fruit fibers”, Journal of Forestry Research, (SCI) – IF – 1.15, Vol. 23, No. 4, pp. 667-674, 2012.
K. ObiReddy, C. U. Maheshwari, M. Shukla, J. I. Song and T. Varadarajulu, “Tensile and Structural Characterization of Alkali Treated Borassus Fruit Fine Fibers”, Composites Part B - Engineering (SCI) – IF – 6.86, https://doi.org/10.1016/j.compositesb.2012.04.075 Vol. 44, pp. 433-438, 2013.
R. M. Mahamood, E. T. Akinlabi, M. Shukla and S. Pityana, “Material Efficiency of Laser Metal Deposited Ti6Al4V: Effect of Laser Power”, Engineering Letters, ISSN: 1816-0948, Vol. 21(1), pp. 18-22, 2013.
K. ObiReddy, C. U. Maheshwari and M. Shukla, “Physico-Chemical Characterization of Cellulose Extracted from Ficus Leaves”, Journal of Biobased Materials and Bioenergy (SCI) – IF – 2.99, ISSN: 1556-6560, Vol. 7, pp. 496-499, 2013.
J. Pilusa, E. Muzenda, M. Shukla, “Thermo-Chemical Extraction of Fuel Oil from Waste Lubricating Grease Waste Management”, Waste Management (SCI) – IF – 5.43, Vol. 33, Issue 6, pp. 1509–1515, 2013.
K. V. Parasuram, K. ObiReddy, M. Shukla, T. Marwala and T. Varadarajulu, “Physico-chemical, tensile and thermal characterization of Napier grass (native African) fiber strands”, International Journal of Polymer Analysis and Characterization, (SCI) – IF – 1.42, https://doi.org/10.1080/1023666X.2013.784935 Vol. 18, Issue 4, pp. 303-314, 2013.
R. M. Mahamood, E. T. Akinlabi, M. Shukla and S. Pityana, “Scanning Velocity influence on Microstructure, Microhardness and Wear Resistance Performance on Laser Deposited Ti64/TiC Composite”, Materials and Design (SCI) – IF – 5.77, https://doi.org/10.1016/j.matdes.2013.03.049 Vol. 50, pp. 656–666, 2013.
C. U. Maheswari, K. ObiReddy, E. Muzenda, M. Shukla, A. V. Rajulu, “A Comparative Study of Modified and Unmodified High-Density Polyethylene Borassus Fiber Composites”, International Journal of Polymer Analysis and Characterization, (SCI) – IF – 1.42, Vol. 18, Issue 6, pp. 439-450, 2013.
R. M. Mahamood, E. T. Akinlabi, M. Shukla and S. Pityana, “Characterizing the Effect of Laser Power Density on Microstructure, Microhardness, and Surface Finish of Laser Deposited Titanium Alloy”, ASME Journal of Manufacturing Science and Engineering (SCI) – IF – 2.61, Vol. 135, No. 6, 064502, 2013.
C. U. Maheswari, K. ObiReddy, E. Muzenda, M. Shukla, A. V. Rajulu, “Mechanical Properties and Chemical Resistance of Short Tamarind Fiber/Unsaturated Polyester Composites: Influence of Fiber Modification and Fiber Content”, International Journal of Polymer Analysis and Characterization, (SCI) – IF – 1.42, ISSN: 1023-666X, Vol. 18, Issue 7, pp. 520-533, 2013.
R. M. Mahamood, E. T. Akinlabi, M. Shukla and S. Pityana, “Revolutionary Additive Manufacturing: An Overview”, Lasers in Engineering, (Scopus) – IF – 0.34, ISSN: 0898-1507, pp. 161-178, Vol. 27, No. 3-4, 2014.
N. Thayumanavan, P. Tambe, G. Joshi and M Shukla, “Effect of sodium alginate modification of graphene (by ‘anion-π’ type of interaction) on the mechanical and thermal properties of polyvinyl alcohol (PVA) nanocomposites”, Composite Interfaces, (SCI) – IF - 2.02, ISSN: 0927-6440, pp. 1-20, 2014.
K. Sharma and M. Shukla, “Three Phase Carbon Fiber Amine Functionalized Carbon Nanotubes Epoxy Composite-Processing, Characterisation and Multiscale Modeling”, Journal of Nanomaterials, (SCI E) – IF – 2.23, https://doi.org/10.1080/1023666X.2013.784935 Vol. 2014, Article ID 837492, 10 pages, 2014.
K. Sharma and M. Shukla, “Molecular Modeling of Mechanical Behavior of Amine Functionalized Multiwalled Carbon Nanotubes/Epoxy Composites”, New Carbon Materials, (SCI) – IF – 1.17, ISSN: 1007-8827, Vol. 29(2), pp. 32-42, 2014.
K. ObiReddy, C. U. Maheshwari and M. Shukla, E. Muzenda, “Preparation, Chemical composition, characterization and properties of paper sheets made from Napier grass”, Separation Science and Technology, (SCI) – IF – 1.35, ISSN: 0149-6395, Vol. 49(10), pp. 1527-1534, 2014.
M. Tlotleng, E. Akinlabi, M. Shukla and S. Pityana, "Microstructures, Hardness and Bioactivity of Hydroxyapatite Coatings Deposited by Direct Laser Melting Process", Materials Science and Engineering C, (SCI) IF – 4.96, https://doi.org/10.1080/1023666X.2013.784935 Vol. 43, pp. 189-198, 2014.
K. V. Parasuram, K. ObiReddy, M. Shukla, T. Marwala and T. Varadarajulu, “Mechanical Properties, Water Absorption and Chemical Resistance of Napier Grass Fiber Strands Reinforced Epoxy Resin Composites”, International Journal of Polymer Analysis and Characterization, (SCI) – IF – 1.42, Vol. 19(8), pp. 693-708, 2014.
K. Sharma, K. S. Kaushalyayan and M. Shukla, “Pull-out Simulations of Interfacial Properties of Amine Functionalized Multi-Walled Carbon Nanotube Epoxy Composites”, Computational Materials Science, (SCI) – IF – 1.879, ISSN: 0927-0256, Vol. 99, pp. 232-241, 2015.
K. ObiReddy, C. U. Maheshwari, K. R. Reddy, M. Shukla, E. Muzenda and T. Varadarajulu, “Effect of Chemical Treatment and Fiber Loading on Mechanical Properties of Borassus (Toddy Palm) Fiber/Epoxy Composites”, International Journal of Polymer Analysis and Characterization, (SCI) – IF – 1.42, ISSN: 1023-666X, Vol. 20, No. 7, pp. 612-626, 2015.
M. Tlotleng, E.T. Akinlabi, M. Shukla and S. Pityana, "Mechanical and Microstructural Evaluation of Laser Assisted Cold Sprayed Bio-ceramic Coatings: Potential Use for Biomedical Applications", Journal of Thermal Spray Technology, (SCI) – IF – 1.491, ISSN: 1059-9630, Vol. 24(3), pp. 423-435, 2015.
V. P. Kommula, K. ObiReddy, M. Shukla, T. Marwala, E. V. S. Reddy and T. Varadarajulu, “Extraction, Modification, and Characterization of Natural Ligno-Cellulosic Fiber Strands from Napier Grass”, International Journal of Polymer Analysis and Characterization, (SCI) – IF – 1.42, Vol. 21, No. 1, pp. 18-28, 2016.
S. A. Akinlabi, M. Shukla, “Evaluation of Structural Integrity of Laser Formed Steel Sheets for Possible Load Bearing Applications”, Lasers in Engineering, (Scopus) – IF – 0.34, Vol. 35, No. 1-4, pp. 197-216, 2016.
K. ObiReddy, C. U. Maheshwari, E. Muzenda, M. Shukla, and T. Varadarajulu, “Extraction and Characterization of Cellulose from Pre-treated Ficus (Peepal Tree) Leaf Fibers”, Journal of Natural Fibers (SCI) – IF - 0.393, https://doi.org/10.1080/1023666X.2013.784935 Vol. 13, No. 1, pp. 54-64, 2016.
E. T. Akinlabi, M. Shukla, S. A. Akinlabi, S. B. Kanyanga, C. M. Chizyuka, “Forming behavior of Steel Plates after Mechanical and Laser Beam Forming”, Lasers in Engineering, (Scopus) – IF – 0.34, 2016.
P. K. Singh, K. Sharma, A. Kumar and M. Shukla, "Effects of Functionalization on the Mechanical Properties of Multi-Walled Carbon Nanotubes: A Molecular Dynamics Approach", Journal of Composite Materials (SCI) – IF – 1.75, https://doi.org/10.1177/0021998316649781 Vol. 51, No. 5, pp. 671-680, 2017.
A. Das and M. Shukla, "Surface Morphology and In Vitro Bioactivity of Biocompatible Hydroxyapatite Coatings on Medical Grade S31254 Steel by RF Magnetron Sputtering Deposition", The International Journal of Surface Engineering and Coatings - Transactions of the IMF, (SCI) - IF 0.8, https://doi.org/10.1080/00202967.2017.1323675 Vol. 95, No. 5, pp. 276-281, 2017.
A. Das and M. Shukla, "Hydroxyapatite coatings on high nitrogen stainless steel by laser rapid manufacturing", JOM, (SCI) – IF – 2.3, https://doi.org/10.1007/s11837-017-2529-x Vol. 69, No. 11, pp 2292–2296, 2017.
C. Swaroop and M. Shukla, “Nano-magnesium oxide reinforced polylactic acid biofilms for food packaging applications”, International Journal of Biological Macromolecules, (Scopus) – IF – 4.78, https://doi.org/10.1016/j.ijbiomac.2018.02.156 Vol. 113, pp. 729-736, 2018.
T. Bhardwaj and M. Shukla, “Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steel”, Materials Science and Engineering: A, (SCI) – IF – 4.08, https://doi.org/10.1016/j.msea.2018.07.089 Vol. 734, pp. 102-109, 2018.
A. Das and M. Shukla, " Pulsed laser-deposited hopeite coatings on titanium alloy for orthopaedic implant applications: surface characterization, antibacterial and bioactivity studies", Journal of the Brazilian Society of Mechanical Sciences and Engineering, (SCI) – IF – 1.74, https://doi.org/10.1007/s40430-019-1722-y Vol. 41, No. 5, pp 214, 2019.
T. Bhardwaj, M. Shukla, C. P. Paul and K. S. Bindra, “Direct Energy Deposition-Laser Additive Manufacturing of Titanium-Molybdenum alloy: Parametric studies, microstructure and mechanical properties”, Journal of Alloys and Compounds (SCI) – IF – 4.17, https://doi.org/10.1016/j.jallcom.2019.02.121 Vol. 787, pp. 1238-1248, 2019.
A. Das and M. Shukla, "Surface morphology, bioactivity and antibacterial studies of pulsed laser deposited hydroxyapatite coatings on Stainless Steel 254 for orthopaedic implant applications", Proc IMechE Part L: J Materials: Design and Applications, (SCI) – IF – 1.568, https://doi.org/10.1177/1464420716663029 Vol. 233, pp. 120-127, 2019.
C. Swaroop and M. Shukla, "Development of blown polylactic acid-MgO nanocomposite films for food packaging", Composites Part A: Applied Science and Manufacturing, (SCI) – IF – 6.28, https://doi.org/10.1016/j.compositesa.2019.105482 Vol. 124, pp. 105482, 2019.
Y. Tripathi, M. Shukla and A D Bhatt, “Implicit-function based design and additive manufacturing of triply periodic minimal surfaces scaffolds for bone tissue engineering", Journal of Materials Engineering and Performance, SCI - IF – 1.47, https://doi.org/10.1080/00202967.2020.1777689 Vol. 28(12), pp. 7445-7451, 2019.
T. Bhardwaj, M. Shukla, N. K. Prasad, C. P. Paul and K. S. Bindra, “Direct Laser Deposition Additive Manufacturing of Ti–15Mo Alloy: Effect of Build Orientation Induced Surface Topography on Corrosion and Bioactivity”, Metals and Materials International - (SCI) – IF – 1.64, https://doi.org/10.1080/00202967.2020.1777689 Vol. 26, pp. 1015-1029, 2020.
A Das, M Shukla, “Surface Design Using Laser Rapid Manufacturing for Ti64-Hopeite Orthopedic Implants”, Metals and Materials International, (SCI) – IF – 1.64, https://doi.org/10.1007/s12540-020-00646-4, pp. 1-11, 2020.
A Das, M Shukla, “New generation hopeite coating on Ti6Al4V (TC4) by radio frequency magnetron sputtering for prosthetic-orthopaedic implant applications: synthesis and characterisation”, Transactions of the IMF, https://doi.org/10.1080/00202967.2020.1777689 Vol. 98 (2), pp. 88-96, 2020.
A Das, M Shukla, “Multifunctional hydroxyapatite and hopeite coatings on SS254 by laser rapid manufacturing for improved osseointegration and antibacterial character: A comparative study”, Proc IMechE Part H: J Engineering in Medicine, (SCI) – IF – 1.14, https://doi.org/10.1177/0954411920917851, 2020.
T. Bhardwaj, M. Shukla, “Laser Additive Manufacturing- Direct Energy Deposition of Ti-15Mo Biomedical Alloy: Artificial Neural Network Based Modeling of Track Dilution”, Lasers in Manufacturing and Materials Processing, https://doi.org/10.1007/s40516-020-00117-z Vol. 7 (1), pp. 1-14, 2020.
A Das, M Shukla, “Bioactive multifunctional hopeite coatings on new generation SS254 steel by laser rapid manufacturing for bone implant applications”, Transactions of the IMF, https://doi.org/10.1080/00202967.2020.1777689 Vol. 98 (4), pp. 209-216, 2020.
A Das, M Shukla, “Multifunctional hopeite nanocoating on Ti64 substrates by pulsed laser deposition and radio frequency magnetron sputtering for orthopedic implant applications: A comparative study”, Journal of Central South University, https://doi.org/10.1007/s11771-020-4441-8, Vol. 27 (8), pp. 2198-2209, 2020.
Y. Tripathi, M. Shukla and A D Bhatt, “Idealization through interactive modeling and experimental assessment of 3D-printed gyroid for trabecular bone scaffold", IMechE, Part H: Journal of Engineering in Medicine, SCI - IF – 1.28, https://doi.org/10.1177/09544119211022988 , 2021.
T. Bhardwaj, M. Shukla, A K Rai, R. Biswal, K. Ranganathan, P. Ganesh, K.S. Bindra, R. Kaul, “Experimental Investigation of Multiple Laser Shock Peening on Mechanical Properties of Laser Sintering Additively Manufactured Maraging Steel”, Journal of Materials Engineering and Performance, SCI - IF – 1.47, 30 (11), 8515-8528, 2021
P. Yadav, A. Kushwaha and M Shukla, “Analysis of Compression Behaviour of TPMS and Strut type Lattice Structures using Finite Element Method”, NanoWorld A Scopus Journal, Vol. 9, S1, S687-692, 2023.
R Bora, M. Shukla and A. Kumar, “Finite element analysis based design of biomimetic functionally graded scaffolds for human cortical bone applications”, Materials Today: Proceedings.
A. Kumar and M. Shukla, “Numerical Modeling of Selective Laser Melting: Influence of Process Parameters on the Melt Pool Geometry", Journal of Materials Engineering and Performance, SCI - IF – 2.1, pp. 1-16, 2022.
R. Verma, M. Shukla and D K Shukla, "Effect of glass fibre hybridization on the mechanical properties of unidirectional, alkali treated kenaf-epoxy composites", Polymer Composites, SCI - IF – 3.53
AKS Chauhan, M Shukla and A Kumar, “3D thermal simulation of powder bed fusion additive manufacturing of stainless steel”, International Journal on Interactive Design and Manufacturing (IJIDeM), 17, pp. 517–524, 2023.
SS Godara, PK Mahato, I Kumar, M Shukla, “Effect of Interface on Elastic Properties for Hybrid Smart Nanocomposites using Micromechanics based Mori Tanaka Technique”, IJEMS, NIScPR-CSIR, 30(2), 346-355, 2023
A. Kumar and M. Shukla, “Development of process-structure linkage for Inconel 718 processed by laser powder bed fusion: a numerical modeling approach”, Rapid Prototyping journal.
AKS Chauhan, M Shukla and A Kumar, “Solid Particle Erosion Behaviour of Laser Sintered Heat Treated Ti-6Al-4V Alloy”, To appear in Advances in Materials and Processing Technologies, Taylor & Francis
Conference Proceedings:
A. K. S. Chauhan and M Shukla, “Molecular Dynamics Simulation of the Effect of Temperature and Size on the Mechanical Behavior of Cu50Zr50 Metallic Glass ", 11th International Conference on Materials Processing and Characterization (ICMPC-2020)", IIT Indore, Dec. 2020.
R. Verma, M. Shukla and D K Shukla, "Effect of glass fibre hybridization on the water absorption properties of unidirectional, alkali treated kenaf-epoxy composites", 11th International Conference on Materials Processing and Characterization (ICMPC-2020)", IIT Indore, Dec. 2020.
Md. Ahad Islam, M. Shukla and Y. Tripathi, “Development of a 3D printed orthopaedic cast for wrist fracture”, International Conference on Industrial and Manufacturing Systems (CIMS-2020) at NIT Jalandhar, Oct. 2020.
S. Singh, M. Shukla, T. Bhardwaj and A. K. S. Chauhan, "Simulation of Residual Stresses and Distortion of Laser Additive Manufactured Maraging Steel for Aerospace Applications", Presented at the I C on Advanced Materials and Processes for Defence Applications (ADMAT MatDef), Hyderabad, Sept. 2019.
A. K. S. Chauhan and M Shukla, “Residual Stress Modeling and Simulation of Direct Metal Laser Sintered Ti-6Al-4V Alloy", 9th International Conference on Materials Processing and Characterization (ICMPC-2019)", Hyderabad, March 2019.
T. Bhardwaj and M. Shukla, "Direct Metal Laser Sintering of Maraging Steel: Effect of Building Orientation on Surface Roughness and Microhardness", Materials Today: Proceedings 5 (9), 20485-20491, 2018
S. P. Singh, M. Shukla and R.K. Srivastava, "Lattice Modeling and CFD Simulation for Prediction of Permeability in Porous Scaffolds", Materials Today: Proceedings 5 (9), 18879-18886, 2018
C. Swaroop and M. Shukla, "Mechanical, Optical and Antibacterial Properties of Polylactic Acid/Polyethylene Glycol Films Reinforced with MgO Nanoparticles", Materials Today: Proceedings 5 (9), 20711-20718, 2018
R. Verma and M. Shukla, "Characterization of Mechanical Properties of Short Kenaf Fiber-HDPE Green Composites", Materials Today: Proceedings 5 (2), 3257-3264, 2017.
C. Swaroop and M. Shukla, “Polylactic acid/ magnesium oxide nanocomposite films for food packaging applications”, ICCM 2017, Xian, China, August 2017.
T. Bhardwaj, S. P. Singh and M. Shukla, “Finite element modeling and analysis of implant scaffolds”, International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS), pp. 358-362, 2017.
Y. Tripathi and M. Shukla, “Triply periodic minimal surface based geometry design of bio-scaffolds”, I C on Advances in Mechanical, Industrial, Automation and Management Systems, pp. 348-350, 2017.
S. P. Singh, T. Bhardwaj and M. Shukla, “Lattice modeling and finite element simulation for additive manufacturing of porous scaffolds”, International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS), pp. 333-336, 2017.
A. Das and M. Shukla, "Surface morphology and adhesion studies of pulsed laser deposited hydroxyapatite thin film coatings on SS254 stainless steel", 17th Annual International RAPDASA Conference, Nov 2016.
A. Tripathi, M. Shukla and S. Shukla, "Finite Element Analysis of Void and Resin Flow in VARTM", International Conference on Advanced and Agile Manufacturing Systems, Sultanpur, December 2015.
A. Das, M. Shukla and N. Kumar, "Surface morphology and adhesion studies of pulsed laser deposited hydroxyapatite thin film coatings on SS254 stainless steel", DAE-BRNS National Laser Symposium, Indore, December 2015.
S. Kumar, M. Shukla and A. Das, "Thermo-Mechanical Finite Element Analysis of Multilayer Laser Metal Deposition", 16th Annual International RAPDASA Conference, Pretoria, November 2015.
A. Tripathi and M. Shukla, "Determination of Permeability of Polymer Matrix Composites Produced by VARTM”, 11th International Conference on Production, Mechanical And Automobile Engineering, Jaipur, October 2015.
M. Tlotleng, E. Akinlabi, M. Shukla and S. Pityana, “Bioceramic coating of hydroxyapatite fabricated on Ti-6Al-4V with Nd-YAG laser”, Proc. SPIE 9356, High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications IV, March 9, 2015; doi:10.1117/12.2079169, San Francisco.
M. Tlotleng, E. Akinlabi, M. Shukla and S. Pityana, “The Microstructural and Mechanical Characterizations of Hydroxyapatite Coating Fabricated Using Nd:YAG Laser”, 2015 TMS Annual Meeting & Exhibition Symposium: Recent Developments in Biological, Structural and Functional Thin Films and Coatings.
A. Kumar and M. Shukla, “Modelling temperature distribution in multi-track multi-layer selective laser melting: A finite element approach”, Lecture Notes in Mechanical Engineering, ISBN 978-981-99-5612-8, https://doi.org/10.1007/978-981-99-5613-5, 2nd International Conference on Advances in Mechanical Engineering & Material Sciences (ICAMEMS-2023), VIT-AP University, 20 – 22, April 2023
H K Bhardwaj and M. Shukla, “Crack Growth Prediction Models for a Pre-Defined Semi-Elliptical Crack Embedded in a Cantilever Bar Using Supervised Machine Learning Algorithms”, Lecture Notes in Mechanical Engineering, ISBN 978-981-99-5612-8, https://doi.org/10.1007/978-981-99-5613-5, 2nd International Conference on Advances in Mechanical Engineering & Material Sciences, VIT-AP University, 20–22, April 2023