Dr. Anubhav Rawat

Assistant Professor
Department of Applied Mechanics
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: anubhav-r[at]mnnit[dot]ac[dot]in
Telephone: 8800990759(O) 8800990759(R) 8800990759(M)

Other Academic Achievements

Keynote Address/Invited Talks in Conferences & Workshops:

Keynote Speaker in International Seminar on "Computational Fluid Dynamics & It’s Applications” held on 23.02.2019 at Mahaveer Institute of Technology & Science, Jadan, Pali.

Technical talk as Expert/invited speaker on Introduction to two-phase flow and heat transfer on 28/12/2021 for the One-Week Short-Term Course on Experimental and Numerical Approaches to Two-Phase Heat Transfer (December 27 to 31, 2021) organized by the department of Mechanical Engineering, NITK, Surathkal.

Conferences Attended for Presenting Paper:

5th International and 41st National Conference on Fluid Mechanics & Fluid Power, 12-14 Dec 2014, IIT Kanpur, India.

The 8th International Conference for Conveying and Handling of Particulate Solids (CHoPS-2015), 3-7th May 2015, Tel Aviv, Israel

38th International Conference on Boundary Elements and Other Mesh Reduction Methods(BEM/MRM), 21-23 September 2021, New Forest, United Kingdom.

International Operation and Maintenance Conference (Organized by NTPC), (IPS)-2016, 13-15 February 2016, Noida, India.

Reliable flow of Particulate Solids (RELPOWFLO-V),13th-15th June 2017, Skien, Norway.

9th International Conference on Conveying and Handling of Particulate Solids (CHoPS-2018), 10th -14th September 2018, Greenwich, London.

35th Israeli Conference on Mechanical Engineering, Ben Gurion University of the Negev, Beer-Sheba, Israel. (9th -10th October 2018).

1st International Conference on Advances in Fluid Flow and Thermal Sciences (ICAFFTS-2021), SVNIT Surat, September 24-25, 2021,

1st International Conference on Advances in Fluid Flow and Thermal Sciences (ICAFFTS-2021), SVNIT Surat, September 24-25, 2021,

Rawat, Anubhav , and Haim Kalman ‘Exploring suitability of plug flow mode pneumatic conveying for bottom ash disposal in thermal power plants, IPS-2023, NTPC O&M Conference, 13-14th February 2023, Raipur.

SERBIATRIB ’23, Kragujevac (Serbia)-(MAY 2023).

Award and Honors:

Toppers award in Mechanical Engineering during B.E. for 2nd rank, GLAITM, Mathura. (2000-2003)

PhD Fellowship by MHRD at IIT Delhi.(2011-2016)

Post doctorate Fellowship, Mechanical Engineering Department, Ben Gurion University of the Negev, Israel, (2016-2019)

Post doctorate Fellowship, Mechanical Engineering Department, TECHNION-Israel Institute of Technology, Haifa, Israel, (2019)

Post doctorate Fellowship, Indian Institute of Technology-Bombay (2019) (Not Availed)

Conferences/ Workshops/Symposium/ Short-term Courses Organized:

Organized one week online short term course on ‘Modelling of Multiphase Flows (MMF-2021)’ during 27/9/21 to 01/10/21 as coordinator/convener at MNNIT Allahabad.

Organized one week online short term course on ‘Modelling and Simulation in Solid and Fluid Mechanics (MSFM-I)’ during 15/11/21 to 19/11/21 as coordinator/convener at MNNIT Allahabad.

Organized one week online short term course on ‘Modelling of Multiphase Flows (MMF-2021)’ during 27/9/21 to 01/10/21 as coordinator/convener.

Organized one week online short term course on ‘Modelling and Simulation in Solid and Fluid Mechanics (MSFM-I)’ during 15/11/21 to 19/11/21 as coordinator/convener.

On-going Projects:

Design and development of feeder for plug flow mode pneumatic conveying of food powder, DIC, MNNIT-Allahabad, MHRD, India, INR 30,000/-

Design and development of pneumatic conveying pipeline for multiple plug flow of coal ash, DIC, MNNIT-Allahabad, MHRD, India, INR 30,000/-.

Inclusive Technology Business Incubator (i-TBI) at Motilal Nehru National Institute of Technology Allahabad, Prayagraj, Funding Agency DST-NIDHI (4.33 crore , as Co-PI, awarded in 2023)

Consultancy(Ongoing):

Inspection of GPIs by Technical Institutions in Ganga Main Stream States funded by CPCB, New Delhi, . 2023 (Team Member: Consultancy)

Consultancy(Past):

Hydrostatic testing of HDPE pipes , Uttar Pradesh Jal Vidhyut Nigam, INR 33630/-. July-Aug, 2021.

Wetting of DPR, Wss of pathwadh village for NCC limited ( INR 11.80 Lac)

Expert Lectures:

Invited lecture on Computational Fluid Dynamics on 23.03.18, JIET, Jodhpur.

Lecture on "Pneumatic Conveying for bottom ash disposal in thermal power plants" at Heads of AHP meet 2021, NTPC, Raipur, 15th -16th March 2021.

Expert/Invited Lecture ‘Bend Geometry effect on Slurry Flow’, At Department of Mechanical Engineering Guru Ghasidas Vishwavidyalaya (A Central University), Bilaspur, Chhattisgarh, India, In ATAL FDP on Slurry Flow in Mineral Processing – Principle and Practices, December 6th – 10th, 2021. (on 8/12/21)

Expert/Invited Lecture ‘Plug Flow Model in Slurry Flow’, At Department of Mechanical Engineering Guru Ghasidas Vishwavidyalaya (A Central University), Bilaspur, Chhattisgarh, India, In ATAL FDP on Slurry Flow in Mineral Processing – Principle and Practices, December 6th – 10th, 2021 . (on 9/12/21)

Expert/Invited Lecture ‘Modeling and Optimization of Slurry Flow using ANN’, At Department of Mechanical Engineering Guru Ghasidas Vishwavidyalaya (A Central University), Bilaspur, Chhattisgarh, India, In ATAL FDP on Slurry Flow in Mineral Processing – Principle and Practices, December 6th – 10th, 2021. (on 10/12/21).

Expert/Invited Lecture ‘Bend Geometry effect on Slurry Flow’, At Department of Mechanical Engineering Guru Ghasidas Vishwavidyalaya (A Central University), Bilaspur, Chhattisgarh, India, In ATAL FDP on Slurry Flow in Mineral Processing – Principle and Practices, December 6th – 10th, 2021. (on 8/12/21)

Expert/Invited Lecture ‘Plug Flow Model in Slurry Flow’, At Department of Mechanical Engineering Guru Ghasidas Vishwavidyalaya (A Central University), Bilaspur, Chhattisgarh, India, In ATAL FDP on Slurry Flow in Mineral Processing – Principle and Practices, December 6th – 10th, 2021 . (on 9/12/21)

Expert/Invited Lecture ‘Modeling and Optimization of Slurry Flow using ANN’, At Department of Mechanical Engineering Guru Ghasidas Vishwavidyalaya (A Central University), Bilaspur, Chhattisgarh, India, In ATAL FDP on Slurry Flow in Mineral Processing – Principle and Practices, December 6th – 10th, 2021. (on 10/12/21).

Expert/Invited Lecture ‘Introduction to two phase flow and heat transfer’ at Department of Mechanical Engineering, National Institute of Technology- Karnataka (NIT-K), For one week online short term course on ‘Experimental and Numerical Approaches to Two-Phase Heat Transfer’ during 27 to 31 December 2021 (on 28/12/2021).

Reviewer for Transactions / Journal / Conferences:

Nuclear Engineering and Design,

Powder Technology,

Tribology Letters,

Tribology in Industry,

Advances in Mechanical Engineering,

Fluid Dynamics & Material Processing,

Part C: Journal of Mechanical Engineering Science,

Particulate Science and Technology.

NMMIS Engineering and Technology Review.

SWAYAM-2018 during 4th-6th July, 2018 at BITS Pilani

SCES-2020,MNNIT-Allhabad

2nd International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2020), 5th – 7th August 2020, Amity Noida.

2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST 2019), NIT Kurukshetra.

8TH INTERNATIONAL AND 47TH NATIONAL CONFERENCE ON FLUID MECHANICS AND FLUID POWER, 9th-11th December 2020, Indian Institute of Technology Guwahati, India.

1st IEEE international conference on simulation, automation and smart manufacturing (SASM -2021), organized by, Department of Mechanical Engineering, GLA University Mathura.

Iranian Journal of Science and Technology, Transactions of Mechanical Engineering

Powder Technology (SCIE, Impact Factor 5.134) (2021)

Particulate science and technology (SCIE, Impact Factor 2.356) (2021)

Proceedings of the Institutions of the mechanical engineers Part C: Journal of Mechanical Engineering Science (SCIE, Impact Factor 1.762) (2021)

. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, (SCIE, Impact Factor 1.596) (2021)

Advances in Mechanical Engineering, (SCIE, Impact Factor 1.316) (2021)

Journal of Marine science and Engineering (JMSE), MDPI, (SCIE, Impact Factor 2.458) (2021)

Powder technology, (SCIE, Impact Factor 5.134), (2021)

Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, (SCIE, Impact Factor 1.596), (2021)

JMSE-MDPI, (SCIE, Impact Factor 2.458), (2021

Machines-MDPI, (SCIE, Impact Factor 2.428), (2021)

Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (SCIE, Impact Factor 1.596), (2021)

Sustainability Journal, MDPI, (IF 3.251), January 2022

International Journal of Powder technology -2022

Iranian Journal of Science and Technology, Transactions of Mechanical Engineering-2021

. JMSE-MDPI, (SCIE, Impact Factor 2.458), 2022

Machines-MDPI, (SCIE, Impact Factor 2.428), 2021

Books Reviewed:

Engineering Fluid Mechanics, 12e by Donald F. Elger, Barbara A. LeBret, Clayton T. Crowe, John A. Roberson (Wiley India) (2021).

Munson, Young and Okiishis Fundamentals of Fluid Mechanics, 9e by Philip M. Gerhart, Andrew L. Gerhart, John I. Hochstein (Wiley India)(October 2020).

Other Significant Achievements:

Attended Faculty development programs organized by AICTE, New Delhi for Mechanical Engineering at AKGEC, Agra (2006-07).

Attended Faculty development programs organized by AICTE, New Delhi for Mechanical Engineering at Galgotia College of Engineering and Technology (2007).

Attended workshop on "High Concentration Coal Ash Transportation through Pipelines" organized by Indian Institute of Technology Delhi and sponsored by Department of Science and Technology, India (2011-12).

Attended Short term course on "Fly Ash management for Thermal Power Plants (Pneumatic Conveying, Slurry Disposal, Ash Ponds & Mounds and Ash utilization)" under the aegis of Continuing Education Program, Organized by ITMMEC, Indian Institute of Technology Delhi, India. (December 2015).

Evaluator for Preliminary rounds of Toycathon-2021 , organized by Ministry of education innovation cell.2022: