Dr. Ajaya Bharti
Associate Professor
Department of Applied Mechanics
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: abharti[at]mnnit[dot]ac[dot]in
Telephone: 05322271212(O)
Thesis Supervised
| S.No | Research Topic | Name of Student | Completion/Registration Year | Ph.D. Completed: |
|---|---|---|---|
| 1 | Cu-BINDED NOVEL Mg/Ti COMPOSITES FOR AUTOMOBILE APPLICATIONS | Mr. Naveen Kumar | 2023 | Ph.D. Ongoing |
| 1 | Enhancement of Mechanical Properties of Magnesium AZ91 Alloy | Mr. HariomTripathi | 2017 |
| 2 | Preparation and characterization of photovoltaic materials for solar cells application | Mr. Syed Mohd Azam | 2019 |
| 3 | Energy Storage Materials for crashworthiness (Tentative) | Mr. Devendra Prasad | 2020 |
| 4 | Damage Prognosis of Metals and Alloys | Mr. Sunil Kumar Vishwakarma | 2021 |
| 5 | Fatigue Damage Analysis of Alloys and Composites | Mr. Devendra Kumar Gautam | 2021 |
| 6 | Synthesis and Characterization of Solar Energy Absorbing Materials | Mr. Aman Kumar Agrahari | 2021 | M.Tech Students |
| 1 | Fabrication and Mechanical Characterization of Glass-fibre and Flax-Fibre Reinforced Laminated Hybrid Composite | Mr. Subhash Chandra Ram | 2008/2006 |
| 2 | Enhancement of Mechanical Properties of Commercial Aluminium Alloy through E-CAP (Equal Channel Angular Pressing) | Mr. Puneet Chaudhary | 2009/2007 |
| 3 | Experimental Study on Variations of Mechanical Properties of Al-alloy 6061 with the Age-hardening | Mr. Deepak Kumar | 2010/2008 |
| 4 | Linear Static Analysis of Magneto-Electro-Thermo-Elastic Sandwich Plate (Co-Supervisor: Dr. K. M. Gupta) | Mr. Mahesh Chandra Kaushal | 2010/2008 |
| 5 | Synthesis and Characterization of Zinc-Copper Ferrite for LPG Sensing (Co-Supervisor: Dr. Anuj Jain) | Mr. RavikantBarnwal | 2011/2009 |
| 6 | Effect of Artificial Ageing on Fretting-Fatigue Behaviour of 2024 Al alloy | Ms. Artika Rao | 2011/2009 |
| 7 | Effect of Torque Tightening at Low and High Value of Stress Amplitude on the Fatigue Behaviour of 2024-T4 Aluminium Alloy Double Lap Bolted Joints | Mr. Sudhendu Nath Tiwari | 2011/2009 |
| 8 | Fatigue behavior of bolted plate subjected to Block-loading | Mr. Sachin Pal | 2012/2010 |
| 9 | Fatigue behavior of bolted plate subjected to Overloading | Mr. Amit Yadav | 2012/2010 |
| 10 | Effect of Hard Turning on Microstructure and Mechanical Properties of Material (Co-Supervisor: Dr. Audhesh Narayan) | Mr. Maloth Bhikya Naik | 2015/2013 |
| 11 | Evaluation of Fatigue Crack Growth Using Electro-mechanical Impedance Technique | Mr. Shailendra Kumar | 2015/2013 |
| 12 | Study of Wear Behaviour of Severe Plastic Deformed Material | Mr. Gaurav Verma | 2015/2013 |
| 13 | Titanium Oxide Coating on Ti6Al4V alloy and Stainless Steel 316 by Radio-Frequency-Magnetron Sputtering for Biomedical Applications | Mr. Abhinesh Kumar | 2015/2013 |
| 14 | Calcium Titanate Thin Film Deposited on Commercially Pure Titanium by Reactive Sputtering Technique for Biomedical Application | Ms. Priyanka Gupta | 2015/2013 |
| 15 | Study of Thin Film Deposited on Titanium with Pulse Laser Deposition for Electronic, Electrical and Biomedical Application | Mr. Bidyanand Kumar | 2015/2013 |
| 16 | Effect of Cryorolling on Fatigue Crack Growth of Aluminium 2024 | Mr. Angaraj Singh | 2015/2013 |
| 17 | Corrosion Study of Severe Plastic Deformed Material | Mr. Yogendra Kumar | 2015/2013 |
| 18 | Development of Biomaterial for Orthopedic Implant | Mr. Suraj Tiwari | 2016/2014 |
| 19 | Structure Health Monitoring of composite using Electromechanical Impedance technique | Ms. Tripti Sonker | 2016/2014 |
| 20 | Development and Characterization of Coating for Biomedical Application | Mr. Ashutosh Yadav | 2016/2014 |
| 21 | Coated Magnesium Alloy as a Bio-Degradable Orthopedic Metallic Implant | Mr. Ankit | 2016/2014 |
| 22 | Study of Thermoplastic Starch /Cellulose Acetate Phthalate/Forsterite Based Nanocomposite as scaffold for Bone Tissue Engineering (Co-Supervisor: Dr. R. P. Tewari) | Mr. Ankit Prasad Nautiyal | 2017/2015 |
| 23 | Assessment of Fatigue Life of Composite Structure (GLARE) Subjected to Cyclic Load | Mr. Pranshu Malviya | 2017/2015 |
| 24 | Effect of Friction Stir Processing and Aging on Fatigue Properties of Aluminium Alloy 6061 | Mr. Abhishek Asthana | 2017/2015 |
| 25 | Synthesis and Characterization of Hybrid Coating Material for Biomedical Application | Ms. Ritu Kumari | 2017/2015 |
| 26 | Prediction of Mechanical Properties of Friction Stir Processed (FSP) TIG welded Aluminium Joint | Mr. HariomTripathi | 2017/2015 |
| 27 | Investigation Of Mechanical Properties Of Magnesium Alloy Due To Addition Of Hard Particle During Friction Stir Processing | Mr. Ankur Vishal [2016MT09] | 2018/2016 |
| 28 | Investigation of Mechanical And Wear Properties of Magnesium Matrix Hybrid Composite | Mr. Naveen Kumar [2016MT17] | 2018/2016 |
| 29 | Investigation of Mechanical Properties of Copper Alloy Reinforced With Ceramic Particles | Mr. Deepak Kumar [2016MT07] | 2018/2016 |
| 30 | Coating and Characterization of Magnesium Alloy Developed for the Bio-Implants | Mr. Omprakash Rajpoot [2016MT05] | 2018/2016 |
| 31 | Evaluation of Mechanical and Erosion Wear Property of Al6061 Alloy Reinforced With Hard Particle and Graphite | Mr. Rajneesh Gautam [2016MT10] | 2018/2016 |
| 32 | Study of Catheter-associated Biofilm infection (Co-Supervisor: Dr. Vishnu Agarwal) | Ms. Priyanka Kumari [2017BM05] | 2019/2017 |
| 33 | Microstructural And Mechanical Characterization of Al6061 Composite Reinforced with SiC And ZrO2 Particle | Mr. Samsher Verma [2017MT12] | 2019/2017 |
| 34 | Fabrication And Characterization Of Aluminium Matrix Composite Prepared By Stir Casting Process | Mr. Syed Mohd Azam [2017MT13] | 2019/2017 |
| 35 | Enhancement of Mechanical Properties of Mg (AZ91) based Surface Composites by Friction Stir Processing | Mr. Vijay Kumar Yadav [2017MT09] | 2019/2017 |
| 36 | A Re-Analysis Of Mechanical/Fatigue/Tribological/Corrosion Properties Of Joint Prepared By TIG Welding Process | Mr. Vikash Chaudhary [2018MT14] | 2020/2018 |
| 37 | Development and Re-analysis of Mechanical/Tribological Properties of Aluminium Based Surface Composites Prepared by Friction Stir Processing | Mr. Raju Kumar Tiwari [2018MT05] | 2020/2018 |
| 38 | Re-Analysis of Microstructure/ Mechanical Properties of Metal Matrix Composite Prepared By Powder Metallurgy Process | Mr. Ankur [2018MT11] | 2020/2018 |
| 39 | A study of Nano-material coatings for Bio implant application [Co-supervisor: Dr. Abhishek Kumar] | Mr. Ritesh Kumar Kushwaha [2019MT03] | 2021/2019 |
| 40 | A Reinvestigation of Ice Composites for Structural Applications [Co-supervisor: Dr. Abhishek Kumar] | Mr. Dinesh Kumar [2019MT04] | 2021/2019 |
| 41 | Fatigue Behaviour of FSP Processed and Reinforced with TiB2 Magnesium Matrix Composites | Mr. Ashish Mishra [2020MT02] | 2022 |
| 42 | Enhancement Of Biocompatibility Of Ti6Al4V Coated With Carbon Nanotubes | Mr. Chatla Rakesh [2020BM09] | 2022 |
| 43 | Wear Behavior of FSP processed and reinforced with TiB2 Magnesium matrix Composites | Mr. Sarvesh Mishra [2020MT15] | 2022 |
| 44 | Development of composite material as a strain energy absorbing material for battery casing | Ms. Shilpa Yadav [2020EM20] | 2022 |
| 45 | Molecular dynamics simulation study of magnesium aluminium metal composites through LAMMPS [Co-Supervisor: Dr. Manju Verma] | Mr. Salil Kumar Shrivastava [2021MT09] | 2023 |
| 46 | Study of welding performance of dissimilar Al alloys welded by friction stir welding [Co-Supervisor: Dr. Audhesh Narayan] | Mr. Saurabh Kumar [2021PD16] | 2023 | B.Tech Students |
| 1 | Enhancement of Mechanical Properties of Al 6061 Alloy Through Grain Refinement by Friction Stir Processing | 1. Sagar Nagaich 2. Ankit Kumar Agarwal 3. Vijay Kumar Das 4. Munna Sah | 2018/2017 |