Dr. Ajaya Bharti


Dr. Ajaya Bharti

Associate Professor
Department of Applied Mechanics
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: abharti[at]mnnit[dot]ac[dot]in
Telephone: 05322271212(O)

Other Academic Achievements

Keynote Address/Invited Talks in Conferences & Workshops:

Delivered a keynote lecture in the International conference on “Sustainable Innovation in Mechanical Engineering (ICSIME-2K21)” organized by Faculty of Engineering & Technology, Rama University Kanpur, Kanpur, India during 28-29 May 2021

Chair in Conferences:

Chaired one session on the theme “Agile Modelling and Simulation” in the International Conference on “Advanced And Agile Manufacturing System” organized by Department of Mechanical Engineering, Kamla Nehru Institute of Technology (KNIT) Sultanpur during December 28-29, 2016 held at KNIT Sultanpur (INDIA).
Chaired one session on the theme “Agile Operation Research and Software System” in the International Conference on “Advanced And Agile Manufacturing System” organized by Department of Mechanical Engineering, Kamla Nehru Institute of Technology (KNIT) Sultanpur during December 28-29, 2016 held at KNIT Sultanpur (INDIA).
Chaired one session in the International Conference on “Innovations and Developments in Mechanical Engineering” organized by Department of Mechanical Engineering, Kamla Nehru Institute of Technology (KNIT) Sultanpur during March 24 to March 25, 2017 held at KNIT Sultanpur (INDIA).
Chaired one session in the International Conference on “Energy and Environmental Technologies for Sustainable Development” organized by Department of Chemical Engineering, MNNIT Allahabad, India during 14-16 February 2020 held at MNNIT Allahabad, (INDIA).
Chaired one session in the International Conference on “Materials Processing and Characterization (ICMPC-2020)” organized by Department of Mechanical Engineering, GLA University Mathurain association with Gokaraju Rangaraju Institute of Engineering and Technology (GREIT) Hyderabad, India during 21-23 February 2020 held at GLA University Mathura (INDIA).
Chaired Session in “11th International Conference on Materials Processing and Characterization -2020 (ICMPC 2020)” organized by Department of Mechanical Engineering, Indian Institute of Technology Indore (IIT Indore) during 15-17 Dec 2020

Conferences Attended for Presenting Paper:

Ajaya Bharti, K. N. Pandey, K. M. Gupta, “Effect of Mean -stress on the performance of Double-lap Bolted Joint” Proceeding of “International Conference on Metallurgical & Materials Processes, Products and Applications” pp. 69, during 8-10 January, 2014 at OPJIT Raigarh, M. P., India.
Ajaya Bharti, K. N. Pandey, K. M. Gupta, “Effect of Cryorolling on Microstructure of Al 2024” Proceeding of “International Conference on Metallurgical & Materials Processes, Products and Applications” pp. 111, during 8-10 January, 2014 at OPJIT Raigarh, M. P., India.
Rahul dev, Ajaya Bharti “Estimation of Performance of Proposed Room Designed on Solar Architectural Concepts” Proceedings of the 2nd International Conference on Renewable Energy and Environmental Engineering (ICREEE 2017) organized by Godavari Academy of Science and Technology, Khajuraho during 09-11 December 2017 Published by: Basha Research Corporation, Hyderabad, India ISBN 13: 978-81-930222-4-5
Akash Gupta, Kuldeep K. Saxena, Ajaya Bharti, L. Jayahari, Kanwal Chadha, Prudvi Reddy Paresi, “Influence of ECAP Processing Temperature and Number of Passes on Hardness and Microstructure of Al6063”, In the proceeding of 12th International conference on Materials processing and characterization (12TH ICMPC), Organized at NITTR Chandigarh, India during 06-08 Oct 2021.

Award and Honors:

Raju Kumar Tiwari, Ajaya Bharti, Hariom Tripathi, Naveen Kumar and Kuldeep K. Saxena, “A Re-investigation of Mechanical Properties of Aluminium based Surface Composites Prepared by Friction Stir Processing” during "2nd International Conference on Aspects of Materials Science and Engineering" ICAMSE2021 organized by Panjab University Chandigarh on 05th – 06th March, 2021 at Hyatt Regency, Chandigarh, India in which participants from more than twenty countries registered and presented their papers.(Best Research Paper)
“National Award of Excellence” awarded by Glacier Journal Research Foundation, Ahmedabad, India in December 2016
“Dr Ambedkar Samaj Seva Samman-2017” awarded by “Sambodhi Sansthan”, Chandauli, UP, India in July 2018
GATE fellowship for pursuing M. Tech. Programme at MNNIT, Allahabad, awarded by MHRD, Govt. of India during July 2002- June 2004

Conferences/ Workshops/Symposium/ Short-term Courses Organized:

As a Course coordinator organized, Two week ISTE workshop on “Engineering Mechanics” under the project “National Mission on Education through Information and Communication Technology (NMEICT)” funded by MHRD, Government of India, during November 26-Decemeber 06, 2013 jointly organized by MNNIT Allahabad and IIT Bombay.
As a faculty coordinator, organized National Level Industry-Institute symposium on “Turbomachines (NIST-2014)” at Department of Applied Mechanics, MNNIT Allahabad during April 5-6, 2014
As a coordinator, Invited lectures on “Metallic Glasses and Its Composites” at MNNIT Allahabad delivered by Prof. R. K. Mandal, IITBHU, Varanasi on 5th May, 2014 funded by TEQIP-II.
Organized as a Coordinator “6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016)” held during 15-17 December 2016 at MNNIT Allahabad.
Organized a TEQIP-III sponsored Short Term Course as a Coordinator “Advances and Applications of NanoFluids” held during 18-23October 2018 at MNNIT Allahabad.
As an “Organizing Secretary” organized an “International Conference on Applied Research and Engineering (ICARAE-2021)" at Mechanical Engineering Department, FEBE, Cape Peninsula University of Technology, South Africa during 26-28 November, 2021

Expert Lectures:

Delivered a lecture on “Research In Higher Education Institute” at Harcourt Butler Technological Institute Kanpur, India during a workshop titled as “State Level Faculty Interaction Seminar and Curriculum Review Workshop" held during June 8-9, 2015
Delivered a lecture on “Strengthening of Metals and Alloys” at Mechanical Engineering Department, BIET Jhansi, India during a Short Term Course (STC) “Advances and Challenges in Material and Manufacturing (ACMM-2019)” held on Nov 04-08, 2019.
Delivered a lecture at Faculty of Engineering & Technology, Rama University, India during a “Lecture Series” organized by Mechanical Engineering Department, Rama University, Kanpur, UP, India held on January 18, 2021.
Delivered a lecture at Mechanical Engineering Department, IET, Dr. R.M.L. Awadh University Faizabad, Ayodhya, UP, India during a One Week National Workshop: "Modern Materials and Manufacturing for Product Development" scheduled from 24th -28th Feb 2021.

Reviewer for Transactions / Journal / Conferences:

Materials Today: Proceedings, Elsevier
Part B: Journal of Engineering Manufacture, SAGE Publication
Ceramics International, Elsevier
Walailak Journal of Science and Technology
Indian Journal of Engineering and Materials Sciences, NISCAIR, India
Journal of Advances in Materials & Processing Technologies, Taylor & Francis
Materials Science Forum (Elsevier)
Engineering Fracture Mechanics (Elsevier)
International Journal of Engine Research (SAGE Publication)

Other Significant Achievements:

Chaired Inaugural Session as a Chief Guest in Faculty Development Programme “SCI Lab” during 06-10 August, 2020, organized by “S R Institute of Management and Technology” affiliated to Dr. APJ Abdul Kalam University Lucknow, India