Dr. Sunil Kumar Gupta
Associate Professor
Department of Mechanical Engineering
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: sunilg[at]mnnit[dot]ac[dot]in
Telephone: 05322271530(O) 8840080740(M)
Thesis Supervised
| S.No | Research Topic | Name of Student | Completion/Registration Year | Ph.D. Completed: |
|---|---|---|---|
| 1 | Synthesis and Characterization of Nanocomposite Foam having Flexible and Impact Resistance Properties | Ganesh | 2024/2020 | Ph.D. Ongoing |
| 1 | Joining of composite materials with polymer nanocomposite adhesive | Swati Gupta | 2021 | M.Tech Students |
| 1 | 3D FE Analysis of Single Lap Joint Bonded With Epoxy/Alumina Nanocomposites Adhesives. (Join Alstom company) | Ruby Katheriya | 2020 |
| 2 | Evaluation of fracture toughness of epoxy/alumina Nanocomposite adhesive using FEM (Pursuing PhD from IITBHU Varanasi) | Sanjula Pradhan | 2020 |
| 3 | Durability analysis of lap joint bonded with polymer nanocomposite adhesive. | Nadeem Akhtar | 2019 |
| 4 | Design and analysis of split Hopkinson pressure bar system (Pursuing PhD from IIT Kanpur) | Abhishek Kumar Verma | 2019 |
| 5 | Fracture behaviour of polymer nanocomposite adhesive at different strain rate. (Asstt Engineer, Irrigation Department, UPPSC) | Santosh Kumar Gautam | 2019 |
| 6 | Effect of Elevated Temperature on Shear Strength of Polymer Nanocomposite Adhesives. (Join CPWD, Ministry of Housing and Urban Affairs, Govt. of India) | Manish Kumar Gautam | 2018 |
| 7 | Toughening of epoxy adhesive with alumina nanoparticles in bonded metal joints (with Dr. D K Shukla) (Join Mahle Stuttgart Germany) | Dhake Kaustubh Ravindra | 2016 |
| 8 | Finite element modelling of polymer nanocomposites based adhesively bonded metal joints (with Dr. D K Shukla) (Join Indian Railway) | Anurag Bharti | 2016 |
| 9 | Fracture strength in cleavage of epoxy/alumina nanocomposite adhesives in bonded metal joints (with Dr. D K Shukla) (Pursuing PhD from IIT Kanpur) | Manish Kumar Singh | 2015 |
| 10 | Multilinear elastic stress analysis of single lap joint bonded with polymer nanocomposite adhesive (with Dr. D K Shukla) | Santosh Kumar Pandey | 2015 |
| 11 | Finite element modeling of polymer nanocomposites as an adhesive (with Dr. D K Shukla) | Arpit Agrawal | 2014 |
| 12 | EDM process performance evaluation by statistical modeling and optimization. (with Dr. Pragya Shandilya) | Vipin Tripathi | 2014 |
| 13 | FEM Based Rail Wheel Analysis with Track Assuming Elastic Foundation (with Prof Mukul Shukla) | Aniket Lal | 2021 |
| 14 | FE analysis of fracture properties of butterfly composite joints | Avnish Pratap Singh | 2021 |
| 15 | Fatigue analysis of composite joint bonded with nanocomposite adhesives through FEM (Selected for PhD at IIT Kanpur) | Pawan Kumar | 2021 |
| 16 | FEM Based Rail Wheel Analysis with Track Assuming Elastic Foundation | Aniket Lal | 2022 |
| 17 | Modelling and simulation of dynamic shear strength of single lap joint bonded with adhesives | Anshuman Gautam | 2022 |
| 18 | Evaluation of Stress Intensity Factor and J-integral of DCB joint with a crack in the adhesive layer | Aditya Anand | 2022 |
| 19 | Modal analysis and testing on delaminated composite laminates | Manjula Vishwateja | 2022 |
| 20 | Component and Assembly Level Failure Analysis of Mounting Strap Joint of Vehicle Engine Exhaust After-Treatment System | Amulya Gupta | 2023 | B.Tech Students |
| 1 | Stress distribution on the Dental Implant and its peripheral bone | Harish Chand Saurabh, Kamlesh Panwar, Ravi Kumar | 2021 |
| 2 | Design and development of fin stabilisation system for a Prototype ship | Saumya Upadhyay, Ayush Kumar Siddharth, Ravi Sai Sumeeth | 2020 |
| 3 | Design and analysis of steering system of prototype ship | Sandeep Kumar Mandal, Satyam Singh | 2020 |
| 4 | Development of Portable Cooking System Using Hydroxy Gas | Ankit Verma, Arun Kumar Singh, Rahul Yadav, Pande Ritvik Devmani | 2019 |
| 5 | Design, manufacturing and analysis of prosthetic knee | Nitin Niranjan, Swanand Shinde, Vivek Chaudhary, Kunal Gautam | 2018 |
| 6 | Design and development of high temperature testing system on UTM | Hemant Rawat, Advitiya Brijesh, Raju Kumar Gupta | 2018 |
| 7 | Finite element analysis of adhesively bonded single lap joints under compressive mode of loading | Sauarbh Purohit, Satendra Kumar Verma, Aditya Mantha | 2016 |
| 8 | Analysis of strength of adhesively bonded joints | Sumit Singh, Shilpa Misra, Yogendra Kumar | 2015 |
| 9 | Development of IOT based system to monitor and extinguish fires | Vachaspati Mishra, Aryaman Arora, Tarun Verma | 2022 |
| 10 | Design and Development of Smart Irrigation System | Naman Gupta, Rahul Gupta, Rishav Raj, Guguloth Sharath | 2023 |
| 11 | Design and Fabrication of IoT based quadcopter drone for crop inspection and health monitoring | Adarsh Tripathi, Pareek Kanhaiyalal Rajendrakumar, Utkarsh Aeron, Shreyan Dev | 2023 |