Associate Professor
Department of Mechanical Engineering
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: sbmishra[at]mnnit[dot]ac[dot]in
Telephone: +91-532-227-1520(O)
S.No | Research Topic | Name of Student | Completion/Registration Year | Ph.D. Completed: |
---|---|---|---|
1 | Studies on Oxidation, Hot Corrosion and Slurry Erosion Wear of LVOF and Detonation Gun Sprayed Coatings | Nagendra Kumar Mishra | 2015 |
2 | Modeling and simulation studies of CNT reinforced nanocomposites: A Hybrid approach | Kishore Guru | 2017 |
3 | Studies on erosion wear and oxidation behaviour of thermal spray coatings on boiler steels and structural steel | Prashant Kumar Singh | 2020 |
4 | Effect of Ti- addition and Post Coating Heat Treatment on the Performance of Hydroxyapatite Coating | Srikant Tiwari | 2022 | Ph.D. Ongoing |
1 | Studies on erosion wear behavior of thermal spray coatings for power plant components | Abhay Shanker Yadav | Ongoing |
2 | Oxidation, Hot corrosion and Erosion wear performance of welded joints | Prashant Pandey | Ongoing |
3 | Tribological Properties of Composite Coatings | Purushottam Mishra | Ongoing |
4 | Erosion wear behavior of Microwave clads | Manavendra Mishra | Ongoing |
5 | Wear and corrosion protection of locomotive components | Shalini Awasthi | Ongoing/20 | M.Tech Students |
1 | Methods to prevent coke oven gas plant failure | Dinesh Kumar Patel | 2021 |
2 | Application of Thermal Barrier Coatings on Engine Piston | Vivek Kumar | 2021 |
3 | FE analysis of leaf springs | Varish Tripathi | 2020 |
4 | Deformation behavior of crankshaft | Pradeep Mahur | 2020 |
5 | Wear behaviour of different WC-Co, WC-Co-NiCr coatings | Aditya Kumar Singh | 2019 |
6 | Studies on Corrosion Behaviour of WC-Co-Cr, stellite-6 and stellite-21 coatings | Ram Awadhesh Yadav | 2019 |
7 | Studies on the effect of Alumina and fly ash contents on the mechanical properties of Al 6061 Composites | Abhishek Upadhyay | 2018 |
8 | Investigations on wear behavior of gas turbine components | Amit Ranjan Hota | 2018 |
9 | Some Tribological studies on WC-Co coatings | Vikash Kumar Jha | 2017 |
10 | Mechanical and viscoelastic properties of polymer composites | Alok Kumar | 2017 |
11 | Studies on Erosion Wear behavior of Detonation Gun Cr3C2-25NiCr and Ni-20Cr coatings on Inconel 825 Superalloy | Shivkant | 2016 |
12 | Studies on Erosion Wear behavior of Detonation Gun Cr3C2(75%)-NiCr(25%) and WC(88%)-Co(12%) coatings on SAE387 G5 Stainless Steel | Golden Kumar Prabhakar | 2016 |
13 | Studies on Erosion behavior of Al2O3, Al2O3-13wt%TiO2 and Al2O3-40wt%TiO2 coatings at room temperature, 400oC and 800oC | Sarika Singh | 2016 |
14 | Solid Particle Erosion Wear of High Velocity Oxy-Fuel Sprayed Coating | Shalini Awasthi | 2016 |
15 | Hot Corrosion Behaviour of Thermal Barrier Coatings | Amarjeet | 2015 |
16 | Role of Cr3C2-NiCr coating for improvement of erosion resistance of Hydro Power Plant Components | Manvendra Mishra | 2015 |
17 | Theoretical studies of wear behavior of MEMS material | Divya Singh Chauhan | 2014 |
18 | Oxidation behaviour of Detonation gun sprayed Ni-Cr coating | Vikas Gupta | 2014 |
19 | Hot corrosion behaviour of Detonation gun sprayed Ni-Cr coating | Ashok Kumar | 2014 |
20 | Slurry erosion wear of stellite-6 and stellite 21 coatings | Arpan Katiyar | 2014 |
21 | Solid particle erosion wear of composite materials | Atul Kumar Upadhyay | 2013 |
22 | Ashwani Kumar Rai | Role of thermal spray coating in improving oxidation and hot corrosion resistance of SAE 431steel | 2013 |
23 | Oxidation and hot corrosion behaviour of Detonation gun sprayed Al2O3-TiO2 coating | Naveen Kumar | 2013 |
24 | Slurry erosion wear of Detonation gun sprayed coatings | Abhay Shankar Yadav | 2013 |
25 | Slurry Erosion resistance of LVOF sprayed coatings | Santosh Kumar | 2012 |
26 | Oxidation and Hot Corrosion Performance of LVOF sprayed Al2O3-TiO2 coating | Vinay Kumar Sahu | 2012 |
27 | Evaluation of Mechanical Properties of CNT reinforced composites using Materials Studio software | Dinesh Kumar | 2012 |
28 | Effect of Impingement angle, Slurry Concentration & Velocity on Slurry erosion wear of Stainless Steels and Cr3C2 -NiCr coating | Ankit Bhasin | 2011 |
29 | Effect of CNTs, Functionalization and curing on elastic properties of DGEBA Epoxy | Mithilesh Kumar Dixit | 2011 |
30 | Effect of CNTs in improving Elastic Properties of Polymer Matrix using ANSYS | Prem Pratap Singh Jadon | 2011 |
31 | FE Analysis of CNT Reinforced Polymer Composite | Chetan Badiger | 2010 |
32 | Slurry Erosion Wear of Cr3 C2 -25 NiCr Coatings on AISI 430 and AISI 204 Steel | Vinod Kumar | 2010 |
33 | Hot Corrosion Behaviour of Ni-40Cr Coatings on 1.7734 Boiler Steel & SAE-501 Alloy Steel | Prince Gupta | 2010 |
34 | Role of HVOF Ni-Cr-Mo-Si-B & 75/25 Cr3C2/Ni-Cr Coatings In Improving Slurry Erosion Performance of AISI 316 & AISI 304 Stainless Steel | Ankit Kumar | 2010 |
35 | Evaluation of Hot corrosion behaviour of AISI-316 & AISI-310 alloy steels | Prashant Singh | 2009 |
36 | Slurry erosion behaviour of thermal sprayed coatings on SS304L & AISI-431 steels | Sanjay Kumar | 2009 |
37 | Evaluation of High Temperature Oxidation behaviour of AISI-316 & AISI-310 alloy steels | Naresh Rathore | 2009 |
38 | Finite Element Modelling of Surface Stresses in Coating Under Single Impact | Ashutosh Dubey | 2008 |
39 | Development of Pot Tester for Slurry Erosion | Vijay Kumar Shukla | 2007 |
40 | Tribological studies of TIG welded joints | Anmol Shrivastava | 2022/2020 |
41 | Application of 3D printing in Automotive Industries | Shbham Sahai | 2022/2020 |
42 | Oxidation and Erosion Wear Behaviour in Dissimilar Welded Joints | Vishal Kumar Gupta | 2022/2020 |
43 | Design and Development on Low Speed Precision Cutter | Abhishek Shakkar | 2023 |
44 | Analysis of Printing Parameters on the Performance of Robotic Gripper Jaws | Shivam Singh | 2023 |
45 | Studies on erosion and oxidation behavior of microwave clads | Shivajee Yadav | 2024 |