Dr. Abhishek Kumar
Professor
Department of Applied Mechanics
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: abhishek[at]mnnit[dot]ac[dot]in
Telephone: 05322271209(O) 05322271708(R)
Thesis Supervised
| S.No | Research Topic | Name of Student | Completion/Registration Year | Ph.D. Completed: |
|---|---|---|---|
| 1 | Mechanical and viscoelastic investigations of nano-filler dispersed epoxy composites (Second Supervisor: Prof. Anuj Jain) | Dr. Sushil Kumar Singh (2013RAM51) | 2019 |
| 2 | Studies on the development of SiC-based composites materials for microwave absorption | Dr. Samarjit Singh (2015RAM01) | 2020 |
| 3 | Corrosion Mitigation of Structures using Magnesium Alloys as Sacrificial Anodes (Main Supervisor: Dr. Sumit Gandhi, JUET Guna, MP) | Dr. Yogesh Iyer Murthy (Enroll No: 153151, JUET Guna) | 2021 |
| 4 | Mechanical behavior, Corrosion and Texture analysis of Al-Mg-Si alloy and pure Copper processed by MAC | Dr. Abir Roy (2015RAM05) | 2021 |
| 5 | Studies on Microstructure, Mechanical, Corrosion and Fatigue behaviour of coated Laser Sintered Titanium Grade 5 Alloy (Main Supervisor: Prof. Mukul Shukla, MED) | Mr. Amit Kumar Singh Chauhan (2015RME52) | 2024 |
| 6 | Mechanical and corrosion behavior of Cryo-rolled and CGPed Austenitic stainless steels | Dr. Rahul Singh (2014RAM52) | 2022 | Ph.D. Ongoing |
| 1 | Development of Multicomponent Alloys | Mr. B. Kranthi Kumar (2018RAM07) | 2018 |
| 2 | Shape Memory Polymer (Second Supervisor: Dr. Satish Kumar) | Mr. Avadesh Yadav (2020RAM01) | 2020 |
| 3 | Microwave Absorbing Materials | Ms. Deeksha Gupta (2020RAM02) | 2020 |
| 4 | Auxetic Structures Main Supervisor: Dr. R. Sujithra, in-progress. | Mr. Mohit Kumar Pandey (2021RAM53) | 2021 |
| 5 | Severe Plastic Deformation; in-progress | Mr. Saurabh (2022RAM05) | 2022 |
| 6 | Additive Manufacturing Main Supervisor: Dr. R. Sujithra, in-progress | Ms. Chahare Sandhya (2022RAM01) | 2022 |
| 7 | Inflatable Structures (Main Supervisor: Dr. Satish Kumar) | Mr. Amrendra Kumar Singh (2023RAM52) | 2023 | M.Tech Students |
| 1 | Modelling of tensile flow and work-hardening behavior of stainless steel using a dislocation density-based model | Mr. Harikesh (Reg. No: 2018MT06) | 2020 |
| 2 | Hard Coating Material Selection Using Multi-Criteria Decision Making | Mr. Aman Tewari (Reg. No: 2018MT07) | 2020 |
| 3 | Deformation behaviour of CGPed Aluminium Alloys | Mr. Prashant Tewari (Reg. No: 2018MT03) | 2020 |
| 4 | Bio-corrosion behaviour of magnesium alloys | Mr. Arvind Kushwaha (Reg. No: 2018BM11) | 2020 |
| 5 | Effect of graphene addition in Ni/SiC composites for improved microwave absorption | Mr. Anil Kumar Maurya (Reg. No: 2017MT08) | 2019 |
| 6 | Effect of graphene dispersion on shape memory effect and mechanical properties of epoxy | Mr. Rishi Tiwari (Reg. No: 2017MT04) | 2019 |
| 7 | Investigations of Mechanical Properties of Pure Aluminium and Pure Copper Processed By CGP | Mr. Subodh Kumar Verma (Reg. No.: 2017MT11) | 2019 |
| 8 | Development of ferrous based high entropy alloy | Mr. Shashank Dimri (Reg No.: 2017MT17) | 2019 |
| 9 | Effect of Green Synthesis on Zinc Oxide nanoparticles for biomedical application | Ms. Anisha (2016MT01) | 2018 |
| 10 | Influence of CNT and Graphene Dispersion on the Microwave Absorption Performance of SiC and Rice Husk Derived SiO2 | Mr. Saurabh (2016MT04) | 2018 |
| 11 | Mechanical behavior and Air-jet erosion wear of ASS- 304 processed by constrained groove pressing | Mr. Deepak Sachan (2016MT13) | 2018 |
| 12 | Development of Graphene-epoxy nano-composites and their mechanical properties | Mr. Saurabh Kumar (2016MT03) | 2018 |
| 13 | Mechanical and Air Jet Erosion Wear Behavior of Multi Axially Compressed Aluminum | Mr. Deepak Singh (2016MT14) | 2018 |
| 14 | Development of Cu dispersed SiC composites for microwave absorption in X-Band | Mr. Ankur Sinha (2015MT05) | 2017 |
| 15 | Wear characteristics of Cryorolled Austenitic stainless steel | Mr. Gaurav Ranjan (2015MT20) | 2017 |
| 16 | Mechanical behavior of Al 1xxx Processed by Multi Axial Compression (MAC) | Mr. Manish Tiwari (2015MT13) | 2017 |
| 17 | Effect of addition of self-healing capsule on toughening behaviour of epoxy polymer | Ms. Bandana Rajpoot (2015MT14) | 2017 |
| 18 | Mechanical behavior of Al 1xxx processed by Torsion | Mr. Rishi Shukla (2014MT15) | 2016 |
| 19 | Effect of surface treatment of silica nanoparticles on mechanical properties of epoxy nanocomposite | Mr. Amit Kumar (2014MT12) | 2016 |
| 20 | Development of Al2O3 Dispersed Al Composite | Mr. Mani Bhushan Singh (2014MT18) | 2016 |
| 21 | Synthesis and Characterization of Mg-Zn-Ca Based Composite | Mr. Rahul Singh (2014MT13) | 2016 |
| 22 | Mechanical Behaviour of Severely Plastically Deformed Austenitic Stainless Steel (Co-supervisor: Dr. Shashi Bhushan Arya, NIT Surathkal) | Mr. Shubham Agarhari (2014MT02) | 2016 |
| 23 | Development of Coating Material for Biomedical Application | Ms. Sushma Yadav (2014MT03) | 2016 |
| 24 | Synthesis and characterization Cu-Ti-Zn based bulk metallic glass | Mr. Aamir Khan (2013MT18) | 2015 |
| 25 | Mechanical behavior of Al 5083 processed by constrained groove pressing (Co-supervisor: Dr. Shashank Shekhar, IIT Kanpur) | Mr. Abir Roy (2013MT04) | 2015 |
| 26 | Development of FeAl intermetallic by mechanical alloying | Mr. Kulbhaskar Pandey (2013MT11) | 2015 |
| 27 | Synthesis and development of zinc oxide coating over biomedical implants | Mr. Neeraj Dev (2013BM18) | 2015 |
| 28 | Development of Zn dispersed SiC for microwave absorption | Mr. Sankalp Shukla (2013MT13) | 2015 |
| 29 | Processing and mechanical behavior of titania particles reinforced epoxy composite | Mr. Samarjit Singh (2013MT09) | 2015 |
| 30 | Sintering behavior of Al hybrid composites | Mr. Vivek Kumar (2013MT12) | 2015 |
| 31 | Synthesis and characterization of Co-Ti doped M-type strontium hexaferrite for microwave absorption (Co-supervisor: Prof. Anuj Jain) | Mr. Khushal Vaishnav (Reg No 2012MT13) | 2014 |
| 32 | Effect of nitriding time on hardness of HW-10673 steel (Co-supervisor: Prof. Anuj Jain) | Mr. Naveen Pratap Singh (Reg. No. 2007MT07) | 2010 |
| 33 | Synthesis and characterization of ferrite | Mr. Pappu Kumar Harijan (Reg. No. 2008MT06) | 2010 |
| 34 | Effect of sol-gel pH on particle size and magnetic properties of ZnFe2O4 | Mr. Gaurav Goswami (Reg. No. 2008MT12) | 2010 |
| 35 | Thermo-Mechanical Analysis of Elastic Cracks in Heterogeneous Materials Using ANSYS | Mr. Pradeep Kumar (Reg. No. 2007MT06) | 2009 |
| 36 | Analysis of thermal stress intensity factor using weight function method | Mr. Manoj Joshi (Reg. No. 2006MT09) | 2008 |
| 37 | Finite Element Analysis of Functionally Graded Cracked plate using I-integral Method | Mr. Aftab Alam (Reg. No. 2005MT09) | 2007 |
| 38 | Crystallization Kinetic Study of Noncentrosymetric Glass by using Differential Scanning Calorimetry | Mr. Himanshu Shukla (Reg. No. 2004MT08) | 2007 |
| 39 | Effect of Cooling Rates on Cyclic Creep Behaviour on Cu alloy and Al alloy | Mr. Suneel Kumar (Reg. No. 2004MT09) | 2006 |
| 40 | An experimental comparative study of cyclic creep behavior on different commercially available Al alloys | Mr. Manoj Kumar Maurya (Reg. No. 2003MT04) | 2006 |
| 41 | Study on the analysis of micromechanical models for dispersed polymer composites | Mr. Anmol Kumar Gupta (2019MT06) | 2021 |
| 42 | Study of Reduction in Radar Cross Section (RCS) of Aluminium Plate | Mr. Shubham C Shangrapawar (2019MT02) | 2021 |
| 43 | Re-investigation of Ice Composites for Structural Applications (Second Supervisor: Dr. Ajaya Bharti) | Mr. Dinesh Kumar (2019MT04) | 2021 |
| 44 | A study of Nanos material Coatings for Bio implant Application (IInd Supervisor: Dr. Ajaya Bharti) | Mr. Ritesh Kumar Kushwaha (Reg. No: 2019MT03) | 2021 |
| 45 | Development of metamaterial microwave absorber using waste material: a cost-effective approach | Mr. Prabhakar Kumar (Reg. No: 2020MT11) | 2022 |
| 46 | Mechanical behaviour of severely deformed aluminium alloy by torsion | Mr. Tushar Banerjee (Reg. No: 2020MT20) | 2022 |
| 47 | Effect of CF and SiO2 Dispersion on Shape Memory Behaviour of Epoxy Polymer | Mr. Sreetam Das (Reg. No: 2020MT18) | 2022 |
| 48 | High Temperature Tensile Response of Inconel 625 | Mr. Dileep Kumar Verma (Reg. No: 2020MT08) | 2022 |
| 49 | Development of graphene nanoplatelets dispersed shape memory polymer composites (IInd Supervisor: Dr. Satish Kumar) | Mr. Rushikethu (Reg. No: 2021EM17) | 2023 |
| 50 | Effect of High-Pressure Torsion on Microstructural Evolution, Microhardness, And Electrical Resistivity of Al7075 | Mr. Ratnesh Kumar Yadav (Reg. No: 2021MT07) | 2023 | B.Tech Students |
| 1 | Development of Shape Memory polymer | Mr. Sumit Soni, Mr. Deepak Kumar, Mr. Kushagra Gupta and Mr. Virendra Kumar Gond | 2019 |
| 2 | Wear Characteristics of severely deformed austenitic stainless steel | Mr. Anup Kumar, Mr. Gaurav Pant and Mr. Gyanendra Rai | 2016 |
| 3 | Experimental Impact Analysis of hybrid functionally graded laminated plate under low velocity impact | Mr. Antriskh Kumar Sinha, Mr. Nishant Chauhan, Mr. Vikas Kumar Singh and Mr. Pankaj Kumar | 2007 |