Dr. Tej Pratap


Dr. Tej Pratap

Assistant Professor
Department of Mechanical Engineering
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: tpratap[at]mnnit[dot]ac[dot]in
Telephone: +91-9835864273(O) +91-9835864273(M)

Research Publications


Books:

T. Pratap*, P. Sahoo. Edited Book Title: Micro-Manufacturing: Fundamentals, Applications and Future Research Prospects (2024). CRC Press: Taylor & Francis Group, (Accepted, Under Publication Phase).

Book Chapter:

Y. Singh, T. Pratap, A. Rai, A. K. Tiwari*. Advancements in Cardiovascular Assistive Devices and Future Innovations for Post-COVID Care, Book: Biological Flow Modelling (2024). CRC Press: Taylor & Francis Group, (Accepted, Under Publication).
G. Murari, B. Nahak, T. Pratap*. Effect of Nanoparticles on Emission Control of IC Engine – a review, Book: Recent Advances in Material, Manufacturing and Machine Learning (2024). CRC Press: Taylor & Francis Group, (Editors: B. Schuller, R. Gupta, R. Mote, A. Sharma, J. P. Giri, R. B. Chadge). eBook ISBN 9781003450252. DOI: 10.1201/9781003450252-62.
R.N. Gupta, A.P. Harsha, T. Pratap. Effect of Surface-Treated Calcium-Copper-Titanate as a Lubricant Additive in Cottonseed Oil on Tribo Performance in Sliding Contacts, Book: Recent Trends in Design, Materials and Manufacturing (Lecture Notes in Mechanical Engineering Book Series) (2022), pp: 555-563. Springer Nature Singapore Pte Ltd., (Editors: M.K. Singh, R.K. Gautam). eBook ISBN: 978-981-16-4083-4. DOI: 10.1007/978-981-16-4083-4_44.
R.N. Gupta, A.P. Harsha, T. Pratap. Nano-technology-driven Interventions in Bio-lubricants Tribology for Sustainability, Book: Green Tribology: Emerging Technologies and Applications (Emerging Materials and Technologies Series) (2021), pp: 99-128. CRC Press: Taylor & Francis Group, (Editors: T. V. V. L. N. Rao, S. B. Kasolang, X. Guoxin, J. K. Katiyar, A. M.A. Rani). eBook ISBN 9781003139386. DOI: 10.1201/9781003139386.
S.K. Patel, A. Pratap, P. Sahoo, B. Nahak, T. Pratap*, Cutting Force Analysis in Micromilling of Al6061-SiCp Composite, Book: Next Generation Materials and Processing Technology-its Advances and Constraints (2021), pp: 285-295. Springer Nature Singapore Pte Ltd., (Editors: S. Bag, C.P. Paul and M. Baruah). eBook ISBN: 978-981-16-0182-8. DOI: 10.1007/978-981-16-0182-8_22.
T. Pratap*, K. Patra, Micro-nano Surface Texturing, Characterization and Their Impact on Bio-interfaces, Book: Advanced Machining and Finishing (Series Handbook: Advanced Manufacturing), (2021), pp: 577-610. Elsevier Inc. (Series Editor: J. P. Davim; Book Editors: K. Gupta and A. Pramanik). ISBN: 9780128174524. DOI: 10.1016/C2018-0-00908-1.
P. Sahoo, T. Pratap, K. Patra, Prediction of Cutting Forces in Micro Milling of P-20 Steel by TiAlN Coated WC Tool: An Analytical Approach, Book: Advances in Simulation, Product Design and Development (Lecture Notes on Multidisciplinary Industrial Engineering), (2020), pp: 93-105. Springer Nature Singapore Pte Ltd., (Series Editor: J. P. Davim; In: M. S. Shunmugam and M. Kanthababu (eds.)). eBook ISBN: 978-981-32-9487-5. DOI: 10.1007/978-981-32-9487-5_8.

Journals:

C.K. Yadav, G.L. Samuel, T. Pratap*. Laser-induced protruded bioinspired texturing of Ti-6Al-4V for controlled wettability in biomedical application, Journal of Micromanufacturing. (2024). DOI: 10.1177/25165984241263148.
D. Dubey, A. Mishra*, H.C. Shriyan, T. Pratap, R. Pandey. Improved Thermal Management of Lithium-Ion Battery Module through Microtexturing of Serpentine Cooling Channels, Energy Technology. (2024). DOI: 10.1002/ente.202301253.
G. Murari, B. Nahak, T. Pratap*. Hybrid surface modification for improved tribological performance of IC engine components – a review, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. (2023). DOI: 10.1177/09544089221150718.
V. Diwakar, A.K. Dubey, T. Pratap*. Prediction of crater shape with different heat flux and parametric simulation in electro-chemical discharge machining, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 237 (4), (2023) 1546-1556. DOI: 10.1177/09544089221119342.
G. Murari, A. Maurya, B. Nahak, T. Pratap*. Surface Modification Strategies for Enhanced Morphological Performance in Biomedical Implantation: Recent Developments, Challenges, and Future Scope in the Health Sector, Critical Reviewsâ„¢ in Biomedical Engineering. 50(6), (2022) 13-43. DOI: 10.1615/CritRevBiomedEng.2022045153.
T. Pratap*, K. Patra. Tribological performances of symmetrical micro-textured Ti-6Al-4V alloy for hip joint, International Journal of Mechanical Sciences. 182, 105736 (2020) 1-16. DOI: 10.1016/j.ijmecsci.2020.105736.
P. Sahoo, T. Pratap, K. Patra. A hybrid modeling approach towards prediction of cutting forces in micro-end milling of Ti-6Al-4V titanium alloy, International Journal of Mechanical Sciences. 150, (2019) 495-509. DOI: 10.1016/j.ijmecsci.2018.10.032.
T. Pratap, K. Patra. Direction dependent dynamic wetting of semi-hemispherical end micro-groove textured Ti-6Al-4V surface, Surface and Coatings Technology. 356 (2018) 138-149. DOI: 10.1016/j.surfcoat.2018.09.037.
T. Pratap, K. Patra. Fabrication of micro-textured surfaces using ball-end micromilling for wettability enhancement of Ti-6Al-4V, Journal of Materials Processing Technology. 262 (2018) 168-181. DOI: 10.1016/j.jmatprotec.2018.06.035.
T. Pratap, K. Patra. Mechanical micro-texturing of Ti-6Al-4V surfaces for improved wettability and bio-tribological performances, Surface and Coatings Technology. 349 (2018) 71-81. DOI: 10.1016/j.surfcoat.2018.05.056.
T. Pratap, K. Patra. Micro ball-end milling - An emerging manufacturing technology for micro-feature patterns, International Journal of Advanced Manufacturing Technology. 94 (2018), 2821-2845. DOI: 10.1007/s00170-017-1064-9.
T. Pratap, P. Sahoo, K. Patra. Fabrication of circular end micro slots using micro ball-end milling, IOP Conference Series: Materials Science and Engineering. 377 (2018) 012131. DOI: 10.1088/1757-899X/377/1/012131.
P. Sahoo, T. Pratap, K. Patra, A.A. Dyakonov. Size effect in micro-end milling of hardened P-20 steel, Materials Today: Proceedings. 5(11) (2018) 23726-23732. DOI: 10.1016/j.matpr.2018.10.163.
T. Pratap, K. Patra. Finite element method-based modeling for prediction of cutting forces in micro-end milling, Journal of The Institution of Engineers (India): Series C. 98 (2017) 17-26. DOI: 10.1007/s40032-016-0232-2.
T. Pratap, K. Patra. Micromilling of Ti-6Al-4V titanium alloy using ball-end tool, IOP Conference Series: Materials Science and Engineering. 229 (2017) 012011. DOI: 10.1088/1757-899X/229/1/012011.
T. Pratap, K. Patra, A.A. Dyakonov. Modeling cutting force in micro-milling of Ti-6Al-4V titanium alloy, Procedia Engineering. 129 (2015) 134-139. DOI: 10.1016/j.proeng.2015.12.021.

Conference Proceedings:

C.K. Yadav, G.L. Samuel, T. Pratap*. Laser Surface Texturing of Ti-6Al-4V to Control Wettability for Biomedical Applications, International Conference on Material Processing using Lasers, and Surface Engineering (IMPULSE 2023), December 14-15, 2023. Centre of Excellence for Advanced Laser Material Processing and Surface Engineering, Indian Institute of Technology Madras, India.
A.K. Ahirwal, K.K. Yadav, A.K. Yadav*, T. Pratap. Experimental and Numerical Investigations on Nucleate Pool Boiling Over Flat Surface, Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC 2023), December 14-17, 2023, Indian Institute of Technology, Patna, India.
A. Maurya, A. K. Dubey, T. Pratap*. Modelling and Simulation of Friction Stir Welding of the Two Dissimilar Metal, 1st International Conference on Mechanical Design and Manufacturing (ICMDM 2023), April 27-28, 2023. Indian Institute of Engineering Science and Technology, Shibpur, India.
G. Murari, B. Nahak, T. Pratap*. Effect of nanoparticles on emission control of IC Engine - a review, International Conference on Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML-2023), February 2-4, 2023. Yeshwantrao Chavan College of Engineering, Nagpur, India & NTPC Group of Colleges, United Kingdom.
T. Pratap*, N. Singh, Y. Singh, S. Kumar. Structural Design, Simulation and Fabrication of Energy Efficient Nozzle Shaped Cooler, 2nd International Conference on Future Trends in Materials and Mechanical Engineering (ICFTMME 2022), August 19-20, 2022. SRM Institute of Science and Technology, Ghaziabad, India.
A. Kumar, A. Kumar, R.N. Gupta, T. Pratap*. Thermo-Mechanical Modeling of Friction Stir Welding Process Using Different Pin Shapes and Shoulder Profiles, 2nd International Conference on Future Trends in Materials and Mechanical Engineering (ICFTMME 2022), August 19-20, 2022. SRM Institute of Science and Technology, Ghaziabad, India.
G. Murari, B. Nahak, T. Pratap*. Surface Modification for Biomedical Implantation: Possibilities, Challenges and Future Scope in Health Sector, International Conference on Advancements in Interdisciplinary Research (AIR-2022), May 6-7, 2022. Motilal Nehru National Institute of Technology Allahabad, India.
G. Murari, B. Nahak, T. Pratap*. Hybrid surface modification for improved tribological performance of IC engine components – a review, International Conference on THIN-FILM Processing and Application (ICTFPA-2022), March 4-5, 2022. MATS University jointly with CEMMPRE-University of Coimbra, School of Sciences-University of Minho, and University of Johannesburg.
R.N. Gupta, A.P. Harsha, T. Pratap, Effect of surface treated calcium-copper-titanate as a lubricant additive in cottonseed oil on tribo-performance in sliding contacts, International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020), October 15-16, 2020. Amity University Gwalior, India.
S.K. Patel, A. Pratap, P. Sahoo, B. Nahak, T. Pratap, Cutting force analysis in micromilling of Al6061-SiCp Composite, National Conference on Research and Development of Materials Processing, Modelling and Characterization (RDMPMC-2020), August 26-27, 2020. National Institute of Technology Jamshedpur, India
P. Sahoo, T. Pratap, K. Patra, Prediction of cutting forces in micro milling of P-20 steel by TiAlN coated WC tool: an analytical approach, 7th International and 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2018), December 13-15, 2018. College of Engineering Guindy, Anna University, India.
T. Pratap, K. Patra, P. Sahoo, Fabrication of circular end micro slots using micro ball-end milling, International Conference on Mechanical Materials and Renewable Energy (ICMMRE-2017), December 8-10, 2017. Sikkim Manipal Institute of Technology, India.
P. Sahoo, T. Pratap, K. Patra, A.A. Dyakonov, Size effect in micro-end milling of hardened P-20 steel, International Conference on Advances in Materials and Manufacturing Applications (IconAMMA-2017), August 17-19, 2017. Amrita Vishwa Vidyapeetham University, India.
T. Pratap, K. Patra, Micromilling of Ti-6Al-4V titanium alloy using ball-end tool, 2nd International Conference on Advanced Materials Research and Manufacturing Technologies (AMRMT-2017), August 2-5, 2017. Phuket, Thailand.
T. Pratap, K. Patra, Fabrication and surface characterization of tool-based micro-dimple texture on Ti-6Al-4V for biomedical implants, 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18, 2016. College of Engineering Pune, India.
T. Pratap, K. Patra, Experimental investigation on the effects of process variables in micro-end milling of Ti-6Al-4V titanium alloy, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN9-2015), December 10-12, 2015. Indian Institute of Technology Bombay, India.
T. Pratap, K. Patra, A.A. Dyakonov, Modeling cutting force in micro-milling of Ti-6Al-4V titanium alloy, International Conference on Industrial Engineering (ICIE-2015), October 22-23, 2015. South Ural State University, Russia.
T. Pratap, K. Patra, Modeling and Analysis of Cutting Forces in Micro-End Milling, 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2014), December 12-14, 2014. Indian Institute of Technology Guwahati, India.
T. Pratap, K. Patra, Machining of Microchannels using Micro-Milling Process, International Colloquium on Materials, Manufacturing and Metrology (ICMMM-2014), September 8-9, 2014. Indian Institute of Technology Madras, India.