KARUNESH KUMAR SHUKLA


KARUNESH KUMAR SHUKLA

Professor
Department of Applied Mechanics
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: kkshukla[at]mnnit[dot]ac[dot]in
Telephone: 05322271203(O)

Research Publications


Books:

An Introduction to Strength of Materials, K.K.Shukla, Anuj Jain,& Ramesh Pandey ( Narosa Publications, 2014, ISBN: 978-81-8487-101-2 )

Book Chapter:

Crushing analysis of tapered circular corrugated tubes subjected to impact loading, S. Rawat, A.K. Upadhyay, and K.K. Shukla, Recent Advances in Structural Engineering, Volume 2 ,197-205, Lecture Notes in Civil Engineering 12, 197-205, eBook ISBN: 978-981-13-0365-4; Hardcover ISBN: 978-981-13-0364-7, Editors: A Rama Mohan Rao, K. Ramanjaneyulu, Publisher: Springer Singapore, DOI: 10.1007/978-981-13-0365-4_17, (2019).
Static Response of Thin-Walled CNT Reinforced Laminated Composite Box Beam, T. Sharma, V. Murari, and K.K.Shukla, Recent Advances in Structural Engineering, Vol. 2, 723-734, Lecture Notes in Civil Engineering 12, 197-205, eBook ISBN: 978-981-13-0365-4; Hardcover ISBN: 978-981-13-0364-7, Editors: A Rama Mohan Rao, K. Ramanjaneyulu, Publisher: Springer Singapore, DOI 10.1007/978-981-13-0365-4 (2019).
Buckling and Post-buckling of Composite Plates Under Thermal Loadings, K.K. Shukla and R. Pandey, Encyclopedia of Thermal Stresses, Editor- R. Hetnarski, DOI 10.1007/978-94-007-2739-7, © Springer Science+Business Media Dordrecht , 505-516, (2014).
Nonlinear Stability and Dynamics of Laminated Composite Plates & Shells, Vibration Problems ICOVP 2005, Springer Proceedings in Physics Book Series (SPPHY, Vol.111), 415-427.

Journals:

D.N. Paliwal, R.K. Pandey, and K.K. Shukla (1999), “Parametric Study on the Vibration of Cylindrical Shell on an Elastic Foundation”, J. of Structural Engineering, (CSIR-SERC), 26(2), 149-153. (Scopus)
K.K. Shukla and Y. Nath (2000), “Nonlinear Analysis of Moderately Thick Laminated Rectangular Plates”, J. Engineering Mechanics, ASCE, 126(8), 831-838. (SCI)
Y. Nath and K.K. Shukla (2001), “Postbuckling of Cross-ply Laminated Rectangular Plates under In-plane Thermal Loading”, Int. J. Nonlinear Science and Engineering, 1, 1-16.
Y. Nath and K.K. Shukla (2001), “Postbuckling of Angle-ply Laminated Plates under Thermal Loading”, Communications in Nonlinear Sciences and Numerical Simulation, 6(1), 1-16. (SCI)
Y. Nath and K.K. Shukla (2001), “Nonlinear Transient Analysis of Moderately Thick Laminated Composite Pates”, Journal of Sound and Vibration, 247(3), 509-526. (SCI)
K.K. Shukla and Y. Nath (2001), “Analytical Solution for Buckling and Postbuckling of Angle-ply Laminated Composite Plates under Thermomechanical Loading”, International Journal of Nonlinear Mechanics, 36(7), 1097-1108. (SCI)
K.K. Shukla and Y. Nath (2002), “Thermomechanical Postbuckling of Cross-ply Laminated Rectangular Plates”, J. Engineering Mechanics, ASCE, 128(1), 93-101. (SCI)
K.K. Shukla and Y. Nath (2002), “Buckling of Laminated Composite Rectangular Plates under Transient Thermal Loading”, Journal of Applied Mechanics, ASME, 69(5), 684-692. (SCI)
K.K. Shukla, J.M. Chen, and J.H. Huang (2004), “Nonlinear Dynamic Analysis of Composite Laminated Plates Containing Spatially Oriented Short Fibres”, Int. Journal of Solids and Structures, 41(2), 365-384. (SCI)
B.P. Patel, K.K. Shukla, and Y. Nath (2004), “Thermal Buckling of Laminated Cross-ply Oval Cylindrical Shells”, Composite Structures, 65(2), 217-229. (SCI)
K.K. Shukla, J.H. Huang, and Y. Nath (2004), “Thermal Postbuckling of Laminated Composite Plates with Temperature-Dependent Properties”, J. Engineering Mechanics, ASCE, 130(7), 818-825. (SCI)
K.K. Shukla, Y. Nath, and E. Kreuzer (2005), “Buckling and Transient Behaviour of Layered Composite Plates under Thermomechanical Loading”, ZAMM, 85(3), 163-175. (SCI)
K.K. Shukla, Y. Nath, E. Kreuzer, and K.V. Sateesh (2005), “Buckling of Laminated Composite Rectangular Plates”, J. Aerospace Engg., ASCE, 18(4), 215-223. (SCI)
J.H. Huang and K.K. Shukla (2005), “Postbuckling of Cross-ply Laminated Rectangular Plates Containing Short Random Fibres”, Composite Structures, 68(3), 255-265. (SCI)
B.P. Patel, K.K. Shukla, and Y. Nath (2005), “Thermo-elastic Stability Behaviour of Laminated Cross-ply Elliptical Shells”, Structural Engineering and Mechanics, 19(6), 749-755. (SCI)
B.P. Patel, K.K. Shukla, and Y. Nath (2005), “Thermal Postbuckling Characteristics of Laminated Conical Shells with Temperature Dependent Properties”, AIAA Journal, 43(6), 1380-1388. (SCI)
B.P. Patel, K.K. Shukla, and Y. Nath (2005), “Thermal Postbuckling Analysis of Laminated Cross-ply Truncated Circular Conical Shells”, Composite Structures, 71(1), 101-114. (SCI)
Wu T.L., K.K. Shukla. and J,H, Huang (2006), “Nonlinear Static and Dynamic Analysis of Functionally Graded Plates”, Int.J. Applied Mechanics & Engineering, 11(3), 679-698. (Scopus)
B.P. Patel, K.K. Shukla, and Y. Nath (2006), “Nonlinear Thermoelastic Stability Characteristics of Cross-ply Laminated Oval Cylindrical/Conical Shells, Finite Elements in Analysis and Design, 42, 1061-1070. (SCI)
B.P. Patel, Y. Nath, and K.K. Shukla (2006), “Nonlinear Thermo-Elastic Buckling Characteristics of Cross-ply Laminated Joined Conical-Cylindrical Shells”, Int. J. Solids and Structures, 43, 4810-4829. (SCI)
V. Tripathi, B.N. Singh. and K.K. Shukla, (2007), “Free Vibrations of Laminated Composite Conical Panels with Random Material Properties”, Composite Structures, 81(1), 96-104. (SCI)
Wu T.L., K.K. Shukla. and J,H, Huang (2007), “Postbuckling Analysis of Functionally Graded Rectangular Plates”, Composite Structures, 81(1), 1-10. (SCI)
B.P. Patel, K.K. Shukla, and Y. Nath (2007), “Thermoelastic Buckling Characteristics of Angle-Ply Laminated Elliptical Cylindrical Shells”, Composite Structures, 77(1), 120-124. (SCI)
K.K. Shukla, Ravi Kumar K.V., R. Pandey. and Y. Nath (2007), “Postbuckling Response of Functionally Graded Rectangular Plates subjected to Thermo-mechanical Loading”, “Int. J. Structural Stability and Dynamics”, 7(3), 519-54. (SCI)
R. Pandey, K.K. Shukla. and A. Jain (2008). “Nonlinear Flexural Analysis of Laminated Composite Plates”, Int. J. Applied Mechanics & Engineering, 13(3), 707-733. (Scopus)
B.N. Singh, A. Umrao. and K.K. Shukla (2008). “Second Order Statistics of Natural Frequencies of Smart Laminated Composite Plates with Random Material Properties”, Smart Structures and Systems: An Int. Journal, 4(1). (SCI)
D. Bhatia, G. Bansal, R. P. Tewari, and K.K. Shukla (2009), “Determination of Activity of Significant Muscle Groups for Lower Limb Exercise”, Indian Journal of Biomechanics: Special Issue.
R. Pandey, K.K. Shukla, and A. Jain (2009),” Thermoelastic Stability Analysis of Laminated Composite Plates: An Analytical Approach”, Communications in Nonlinear Sc. Numerical Simulation, 14, 1679-1699 (20. (SCI)
B.N. Singh, A.K. Bist, M.K. Pandit, and K.K. Shukla (2009), “Nonlinear Free Vibration Analysis of Composite Plates with Material Uncertainties: A Monte Carlo Simulation Approach”, J. Sound & Vibration, 324(1-2). (SCI)
D. Bhatia, R. P. Tewari, S. Ayub, K.K. Shukla, and M.A. Ansari (2010), “ Study of the Role of Muscles under Different Loading Conditions using EMG Analysis of Lower Extremities”, Advances in Applied Science Research, 1(3), 118-128.
R. Pandey, A.K. Upadhyay, and K.K. Shukla (2010), “Hygro-Thermo-Elastic Post buckling Response of Laminated Composite Plates, J. Aerospace Engg., ASCE , 23(1), 1-13. (SCI)
A.K. Upadhyay, R. Pandey, and K.K. Shukla (2010), “Nonlinear Flexural Response of Laminated Composite Plates under Hygro-Thermo-Mechanical Loading, Communications in Nonlinear Sc. Numerical Simulation, 15(9), 2634-2650. (SCI)
T.Ramesh, Ravi Prakash, and K.K. Shukla (2010), “Life Cycle Energy Analysis of Buildings: An Overview”, Energy and Buildings, 42(10), 1592-1600. (SCI)
J. Singh, S. Singh, and K.K. Shukla K.K (2011), “ RBF Based Meshless Method for Free Vibration Analysis of Laminated Composite Plates”, Int. J. of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 5(7), 1290-1295.
J. Singh, S. Singh, and K.K. Shukla K.K (2011), “Flexural Analysis of Laminated Composite Plates using Thin Plate Spline Radial Basis Function”, J. Modeling and Simulation in Design and Engineering, 2(1), 79-84.
D. Bhatia, G. Bansal, R.P. Tewari, and K.K. Shukla (2011), “State of Art: Functional Electrical Stimulation (FES)”, Int. J. Biomedical Engineering & Technology , 5(1), 77-79.
A.K. Upadhyay, R. Pandey, and K.K. Shukla (2011), “Nonlinear Dynamic Response of Laminated Composite Plates Subjected to Pulse Loading”, Communications in Nonlinear Sc. Numerical Simulation, 16(11), 4530-4544. (SCI)
A. K. Jain and K.K. Shukla (2012), “Warehousing Structures-An optimal approach”, Jain A.K.and Shukla K.K , Indian Concrete Journal, 86(8), 43. (SCImago)
R. K. Srivastava, S. K. Duggal , and K.K. Shukla (2012), “Reinforced Cement Concrete Pavement for Village Roads in Alluvial Region: A Sustainable Option", Highway Research Journal, Indian Road Congress, 5(2), 19-26.
T. Ramesh, R. Prakash, and K.K. Shukla (2012), “Life Cycle Energy Analysis of Residential Buildings with Different Envelopes and Climates in Indian Context”, J. Applied Energy, 89(1), 193-202. (SCI)
Jeeoot Singh and K.K. Shukla (2012), “Nonlinear Flexural Analysis of Laminated Composite Plates using RBF Based Meshless Method”, Composite Structures, 94(5), 1714-1720. (SCI)
R. Pandey, A. K. Upadhyay, K.K. Shukla, and A. Jain (2012), “Nonlinear Dynamic Response of Elastically Supported Laminated Composite Plates”, , Int. J. Mechanics of Advanced Materials and Structures, 19 (6), 397-420. (SCI)
T. Ramesh, R. Prakash, and K.K. Shukla (2012), “Life Cycle Approach in Evaluating Energy Performance of Residential Buildings in Indian Context”, Energy and Buildings, 54, 259-265. (SCI)
A. K. Upadhyay, and K. K. Shukla (2012), “Large Deformation Flexural Behavior of Laminated Composite Skew Plates: An Analytical Approach” , Composite Structures, 94(12), 3722-3735 . (SCI)
Jeeoot Singh and K.K. Shukla (2012), “Nonlinear Flexural Analysis of Functionally Graded Plates under Different Loadings using RBF Based Meshless Method”, Engineering Analysis with Boundary Elements, 36(12), 1819-1827. (SCI)
R. K. Srivastava, K.K. Shukla, and S. K. Duggal (2013), “Study of Composite Effect of Concrete Base in Rigid Pavement for Village Roads in Alluvial Region”, J. Indian Road Congress, 74, 1-13.
T. Ramesh, R. Prakash, and K.K. Shukla (2013), “Life Cycle Energy Analysis of a Multifamily Residential House: A Case Study in Indian Context” Open Journal of Energy Efficiency (OJEE), 2, 34.
S. Singh, J. Singh, and K. K. Shukla (2013), “Buckling of Laminated Composite Plates Subjected to Mechanical and Thermal Loads using Meshless Collocations”, Journal of Mechanical Science and Technology, 27(2), 327-336. (SCI)
G. Bhardwaj, A. K. Upadhyay, R. Pandey, and K. K. Shukla (2013), “Non-linear Flexural and Dynamic Response of CNT Reinforced Laminated Composite Plates”, Composites Part B, 45(1), 89-100. (SCI)
A. Sharma, A. K. Upadhyaya, K.K. Shukla (2013), “Flexural Response of Doubly Curved Laminated Composite Shells”, SCIENCE CHINA Physics, Mechanics & Astronomy, 56 (4), 812-817. (SCI)
A. K. Upadhyay, and K. K. Shukla (2013), “Geometrically Nonlinear Static and Dynamic Analysis of Functionally Graded Skew Plates”, Communications in Nonlinear Sciences and Numerical Simulation, 18(8), 2252-2279. (SCI)
A. K. Upadhyay, and K. K. Shukla (2013), “Nonlinear Static and Dynamic Analysis of Skew Sandwich Plates”, Composite Structures, 105, 141-148. (SCI)
A. K. Upadhyay, and K. K. Shukla (2013), “Post buckling Behavior of Composite and Sandwich Skew Plates” International Journal of Non-Linear Mechanics, 55, 120-127. (SCI)
T. Ramesh, R. Prakash, and K.K. Shukla (2014), “Life Cycle Energy of Low Rise Residential Buildings in Indian Context”, Open Journal of Energy Efficiency (OJEE),3, 108-118.
J. Singh, S. Singh, and K.K. Shukla (2014), “Meshless Analysis of Laminated Composite and Sandwich Plates Subjected to Various Types of Loads”, Int. Journal for Computational Methods in Engineering Science & Mechanics, 15(2), 158-171. (SCI)
A. K. Upadhyay and K.K. Shukla (2014), “Post-buckling Analysis of Skew Plates subjected to Combined in-plane Loadings”., Acta Mechanica, 225 (10), 2959-2968. (SCI)
M.K. Solanki, S.K. Mishra, K.K. Shukla K.K., and J. Singh (2015), “Nonlinear Free Vibration of Laminated Composite and Sandwich Plates using Multiquadric Collocations”, Material Today Proceedings, Elsevier, 2, 3049-3055. (Scopus)
S.T. Rushad, S. K.Duggal, and K.K. Shukla (2015) “Experimental Investigations of RC Beams Strengthened with 4-Layered Symmetric Cross-Ply (SCP) GFRP Laminates”, IJRET: International Journal of Research in Engineering and Technology, 4(13), 431-434.
H. Singh, R. Prakash, and K.K. Shukla (2015), “Economic and Environmental Benefits of Roof Insulation in Composite Climate of India”, Climate Change, The International Quarterly journal ISSN 2394-8558 EISSN 2394-8566, 1(4), 397-403.
Sandeep Singh, Jeeoot Singh, and K.K. Shukla (2015), “Buckling of Laminated Composite and Sandwich Plates Using Radial Basis Function Collocations”, International Journal of Structural Stability and Dynamics,15(1), 1540002. (SCI)
K. Guru, S.B. Mishra, and K.K. Shukla (2015), “Effect of Temperature and Functionalization on the Interfacial Properties of CNT Reinforced Nanocomposites” , Applied Surface Science, 349, 59-65. (SCI)
H. Singh, R. Prakash, and K.K. Shukla (2016), “ Energy and Emission Reduction Potential for Bank ATM Units in India”, Open J. of Energy Efficiency, 5(4).
K. Guru, T. Sharma, K.K. Shukla, and Mishra, S.B. (2016), “Study of Effect of Interface on the Elastic Modulus of CNT Nanocomposites”, , Journal of Nanomechanics and Micromechanics, ASCE, 6(3),04016004-1-10. (SCI)
S. Rawat, A. Narayanan, A. K. Upadhyay, and K.K. Shukla (2017).“Multiobjective Optimization of Functionally Corrugated Tubes for Improved Crashworthiness under Axial Impact”, Procedia Engineering, Elsevier, 173, 1382-1389. (Scopus)
Kumari Soni, A.K. Upadhyay, and K.K. Shukla (2017), “Stress Analysis for an Infinite Plate with Circular Holes”, Material Today: Proceedings, Elsevier, 4(2), 2323-2332. (Scopus)
Rajendra Bahadur, A.K.Upadhyay, and K.K. Shukla (2017), “Static Analysis of Singly and Doubly Curved Panels on Rectangular Plan-form”, Steel and Composite Structures, 24 (6), 659-670. (SCI)
S. Choudhury, T. Sharma, and K.K. Shukla (2017), “Effect of Orthotropy Ratio of the Shear Web on the Aero-Elasticity and Torque Generation of a Hybrid Wind Turbine Blade”, Renewable Energy, 113, 1378-1387. (SCI)
Rajendra Bahadur, A.K. Upadhyay, and K.K. Shukla (2018), “Dynamic Behaviour of Curved Panels of Rectangular Planar Form: An Analytical Approach”, Int. J. Structural Stability and Dynamics, 18 (6), 1850084-1-24. (SCI)
A. Khurana, T. Sharma, and K.K. Shukla (2018) “Analysis of Thin Walled Composite Box Beam with and without Piezoelectric Actuators using ABAQUS”, J. Structural Engineering (CSIR-SERC), 45(1), 99-109. (Scopus)
T.Sharma,V.Murari, and K.K. Shukla (2018), “Static Analysis of Thin Walled Composite and Sandwich Box Beam”, J. Structural Engineering (CSIR-SERC), 45(1), 86-98. (Scopus)
Tarun, Rajendra Bahadur, A.K. Upadhyay, and K.K. Shukla (2018), “Dynamic Analysis of Functionally Graded Curved Sandwich Panels”, J. of Structural Engineering (CSIR-SERC), 45 (1), 52-60. (Scopus)
K. Guru, T. Sharma, S.B. Mishra, and K.K. Shukla (2019), “Effect of Temperature on Elastic Properties of CNT Reinforced Nanocomposites”, Material Research Express, 6(8), 085023. (SCImago)
K.Yadav, A.K.Upadhyay, A.K., and K.K. Shukla (2019).“Effect of Obliquity on Ballistic Impact Response of Plain-Woven fabric”, Int. J. of Materials and Structural Integrity, 13 (1-3), 93-109. (Scopus)
T. Sharma, V. Murari, and K. K. Shukla (2021), “Static Analysis of Wind Turbine Blade using 1D FE Mode” International Journal of Engineering, Science and Technology, 13(1), 125-130.
Akhileshwar Pandey, A.K. Upadhyay, and K.K. Shukla (2021), Lightning Strike Response of Composite Structures: A Review”, Journal of Metals, Materials and Minerals, 31(1), 1-10. (Scopus)
Akhileshwar Pandey, A. K. Upadhyay, K.K. Shukla (2021) “Numerical Studies on Damage of Carbon/Epoxy Composites Exposed to Lightning Strike”, International Journal of Engineering, Science and Technology, 13 (1), 112-118.
T. Sharma, V.Murari, and K.K. Shukla, (2021)“ Effects of Aerofoil, Twist and Wind Speed on the Structural Response of 1D Model of Wind Turbine Blade”, J. of Structural Engineering (CSIR-SERC), 48(2), 164-178 (Scopus)
Tushar Sharma, S. Choudhury, V.Murari, and K.K. Shukla , “ The Effect of Shear Web on Dynamic Response of a Wind Turbine Blade Subjected to Actual Dynamic Load”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, (Accepted) (Scopus)
Shyam K, Chaudhary, V.R. Kar, and K.K. Shukla, “Flexural Behaviour of Perforated Functionally Graded Composite Panels under Complex Loading Conditions: A Higher-Order Finite Element Approach”, J. Aerospace Engineering, ASCE, 34(6), 04021081 (1-10). (SCI)

Conference Proceedings:

K.K.Shukla and Jai Prakash (1995), “Light Weight Precast Slab”, Proc. National Seminar on High Rise Structures”, Institution of Engineers, Allahabad, V62-66.
K. Ramakrishna, K.K.Shukla and Arvind Kumar (1997), “Knowledge based system for assessment of distress in reinforced concrete due to corrosion”, Proc. National Seminar on Role of building chemicals in construction industry”, I.E. Allahabad, III103-108.
Y.Nath, K.K.Shukla, A.K.Sharma and G.Raghvender (1998)," Thermal Buckling of Symmetrically Laminated Cross-Ply Rectangular Plates", ICTACEM 98, IIT Kharagpur.
K.K. Shukla,Y. Nath, and R.K.Pandey (1999)," Reliability Analysis of a Tall Vertical Pressure Vessels", Proc. 11th ISME Conf. IIT Delhi, pp. 149-154.
K. K. Shuklaand, Y Nath (2000)," Nonlinear Analysis of Rectangular Plates: An Analytical Approach", SEC-2000, IIT Bombay, pp.359-366, 2000.
Y.Nath, K.K. Shukla and M.P.Janardhana (2001), “Laminated Composite Cylindrical Panels: An Analytical Approach”, 12th ISME Conf., pp.161-168.
K.K.Shukla, Y.Nath, and B.Rahul Deo (2003), “Thermomechanical Postbuckling Of Laminated Composite Rectangular Plates with Temperature Dependent Properties”,ICCE-10 July 20-26, 2003, New Orleans, USA.
K.K.Shukla,Y.Nath and J.H.Huang (2003), “Buckling of laminated composite rectangular plates under thermomechanical loading: An analytical approach”, Proceedings of the 5th International Conference on Thermal Stresses and Related Topics, TS-2003, Blacksburg, VA, USA, TM-5-1-(1-4).
K.K.Shukla, Manoj S. Patil, Ramesh pandey and Anuj Jain (2004) “Thermal Buckling of functionally graded Rectangular Plates”, 17th Engineering Mechanics Conf., ASCE, USA, 2004.
Atul Umrao, B.N.Singh, and K.K.Shukla (2004), “Free vibration response of piezoelectric laminated composite plates with random material properties”, ICTACEM 2004, IIT Kharagpur, pp. 80-83, 2004.
Ramesh Pandey, K.K.Shukla, and Anuj Jain (2004), “Nonlinear static analysis of laminated composite plates”, ICTACEM 2004, IIT Kharagpur, pp. 140-142, 2004.
Jhao-Ming Chen,K.K.Shukla, Jin H.Huang (2005), “Analysis and design of double piezoelectric beam driven torsional microactuator”, ICCES05, IIT Madras.
VivekTripathi, B N Singh and K.K. Shukla (2005), “Free vibration study of laminated composite conical panels with random material properties” International Conference on Smart Materials, Structures and Systems ,July 28-30, 2005 at IISC Bangalore.
B. N. Singh, Arun K. Mishra and K. K. Shukla (2005) “Stability of Piezoelectric Laminated Composite Plates with Uncertain Material Properties” International conference on Smart Materials, Structures and Systems, July 28-30, 2005, IISC Bangalore.
B.P.Patel, A.Sharma, K.K.Shukla, and Y.Nath, (2005) “Nonlinear dynamics and stability of laminated composite plates and shells”, ICOVP, 2005.
K.K.Shukla, Ravi Kumar, KV., and Y.Nath (2006), “ Stability Analysis of Functionally Graded Rectangular Plates”, 15th USNCTAM, Univeristy of Colorado, Colorado, USA, June 25-30, 2006.
V. Anjani Kumar, Ramesh Pandey, K.K.Shukla, and Jin H. Huang (2006), “Linear vibration analysis of composite rectangular plates: A state space approach”, ICCMS06, IIT Guwahati.
R. Pandey, K.K.Shukla, and A. Jain (2006), “Postbuckling response of laminated composite rectangular plates”, ICCMS06, IIT Guwahati.
R.Pandey, A.K.Upadhyay, K.K.Shukla, and A,Jain (2007), “Non-linear Response of Laminated Composite Plates Under Hygro-mechanical Loading”, Int. Conf. on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM), IIT Kharagpur, December 27-29.
K.M.Gupta, A.K.Gupta, and K.K.Shukla (2008), “Nonlinear Analysis of Sandwich Composite Plate under Impact Loading”, 5th MSAT, Bangkok, Sept. 2008, 97-99.
Dinesh Bhatia, Gagan Bansal, R.P Tewari, K.K. Shukla (2009), “Determination of activity of significant muscle groups for lower limb exercise” National Conference on Biomechanics organized by Department of Mathematics, IIT Roorkee and Indian Society of Biomechanics at IIT Roorkee on 7 & 8th March 2009.
Sumit Sharma, Ramesh Pandey, A.K.Upadhyay, and K.K. Shukla (2009), “Postbuckling Response of Hybrid Composite plates", 3rd Int. Congress on Computational Mechanics and Simulation (ICCMS 2009), IIT Mumbai, (Dec.01-05, 2009).
Praveen Kumar, A.K.Upadhyay, and K.K.Shukla (2009), “ Static Analysis of Laminated Composite Skew Plates”,3rd Int. Congress on Computational Mechanics and Simulation (ICCMS 2009), IIT Mumbai, (Dec.01-05, 2009).
Dinesh Bhatia, Ashish Mishra, R.P.Tewari, K.K. Shukla (2010), “Modeling and Simulation of Hip knee muscles using EMG from different locomotion activities” National Conference on Emerging Medical Instrumentation (CEMI-2010) organized by CSIO, Chandigarh on 11th and 12th May 2010.
Dinesh Bhatia, R.P. Tewari, K.K. Shukla (2010), “Mathematical Modeling and Simulation of knee ankle muscles for different locomotion activities” 6th World Congress on Biomechanics (WCB 2010) in conjunction with 14th International Conference on Biomedical Engineering, National University of Singapore and International Federation of Medical and Biomedical Engineering and Biomedical Engineering Society, 1st-6th August 2010, Singapore, IFMBE Proceedings 31, pp. 640–643, 2010.
Jeeoot Singh, K.K.Shukla, and T.Nath (2010), “A mesh free method for analysis of sandwich and composite plates using multiquadric discretization”, 528-53, ICTACEM 2010, IIT Kharagpur.
Sandeep Singh, Ramesh Pandey, and K.K. Shukla (2010), “Buckling Analysis of Laminated Composite Plates with Eccentric Circular Cutouts using FEM”, ICTACEM 2010.
Ambuj Sharma, A.K.Upadhyay, and K.K.Shukla (2010), “Flexural Response of Doubly Curved Laminated Composite Shells”, The Second Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2010) at Nanjing University of Aeronautics and Astronautics Nanjing China, Oct. 22-25, 2010.
G. Bhardwaj, R.Pandey, K.K. Shukla (2011), “ Flexural Response of CNT Reinforced Multi-scale Composite Laminated Plates”, ISAMPE National Conference on Composites- INCCOM10, Nov. 2011, Pune
K.V.Kulkarni, A.K.Upadhyay, and K.K.Shukla (2011), “An Analytical Solution for Dynamic Response of Laminated Composite Skew Plates”, 5th International on Advances inmMechanical Engineering (ACAME), SVNIT SuratIndia, June 06-08, 2011.
M.K.Dikshit, S.B.Mishra, and K.K. Shukla (2011), “Investigation of Elastic Modulus of Epoxy DGEBA Cured with DEDTA by Molecular Dynamics”, 5th International on Advances in Mechanical Engineering (ACAME), SVNIT SuratIndia, June 06-08, 2011.
P.P.Singh, G. Bhardwaj, S.B.Mishra, and K.K. Shukla (2011), “Influence of Aspect Ratio and CNT-Matrix Interphase in Carbon Nanotube Reinforced Composites”, 5th International on Advances in Mechanical Engineering (ACAME), SVNIT SuratIndia, June06-08, 2011.
Viswanath, S.M., A.K.Upadhyay, and K.K. Shukla (2011), “ Low Velocity Impact Analysis of Composite Laminates using Linearized Contact Law”, 5th International on Advances in Mechanical Engineering (ACAME), SVNIT Surat India, June06-08, 2011.
J. Singh, Sandeep Singh, and K.K. Shukla (2011), “ RBF based Meshless Method for Free Vibration Analysis of Laminated Composite Plates”, Int. Conf. on Aeronautical and Astronautical Engineering, ICAAE 2011, Paris, France, July 27-29, 2011.
Viswanath, S.M., A.K.Upadhyay, and K.K. Shukla (2012), “ Low Velocity Impact Analysis of Sandwich Plates using General Linearized Contact Law”, Fourth Int. Conf. on Structural Stability and Dynamics (ICSSD-2012), Jaipur, India, 4-6 Jan. 2012.
Sandeep Singh, J. Singh, and K.K. Shukla (2012), “Buckling of Laminated Composite Plates using Meshless Method Based on Radial Basis Function”, Fourth Int. Conf. on Structural Stability and Dynamics (ICSSD-2012), Jaipur, India, 878-887, 4-6 Jan. 2012.
G. Bhardwaj, A.K. Upadhyay, R. Pandey, and K.K. Shukla (2012), “Buckling and Postbuckling Response of CNT Reinforced Multi-Scale Composite Laminated Plates”, Fourth Int. Conf. on Structural Stability and Dynamics (ICSSD-2012), Jaipur, India, 4-6 Jan. 2012.
A.K. Upadhyay and K.K. Shukla (2012), “ Nonlinear Dynamic Analysis of Laminated Composite Skew Plates”, Fourth Int. Conf. on Structural Stability and Dynamics (ICSSD-2012), MNIT Jaipur, India, Jan.04-06, 2012.
J. Singh and K.K. Shukla (2012), “ Buckling Analysis of Laminated Composite and Sandwich Plates subjected to Different In-plane Loadings”,8th South African Conference on Applied Mechanics, SACAM-2012, University of Johannesburg, South Africa, Sept 3-5, 2012.
P.K.Tungala and K.K. Shukla (2012), “Supersonic Flutter of Rectangular Plates with Variable Fiber Spacing” The Third Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), IIT Delhi, Dec 5-8, 2012.
A.K. Upadhyay and K.K. Shukla (2012), “Buckling of Laminated Composite and Sandwich Skew Plates”, The Third Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), IIT Delhi, Dec 5-8, 2012.
R.B.Patil and K.K. Shukla (2012), “Static and Vibration analysis of Laminated Composite and Sandwich Plates”The Third Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), IIT Delhi, Dec 5-8, 2012.
J.Singh and K.K. Shukla (2012), “Nonlinear Free Vibration of Functionally Graded Plates using Multiquadric collocations,” The Third Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), IIT Delhi, 398-401, Dec 5-8, 2012.
A.K. Upadhyay and K.K. Shukla (2012), “Static and Dynamic Analysis of Functionally Graded Skew Plates” Fourth International Congress on Computational Mechanics and Simulation (ICCMS 2012), IIT Hyderabad, Dec 9-12, 2012.
T.Sharma, K.Guru, S.B.Mishra, K.K. Shukla (2013). ”Evalution of Mechanical properties of SWCNT and MWCNT using FE simulation”. Indian Conference on Applied Mechanics (INCAM 2013), IIT Madras, July 4-6, 2013.
Adnan Ahmed and K.K. Shukla (2013), “Free vibration of variable stiffness composite laminates with curvilinear fibres”, Indian Conference on Applied Mechanics (INCAM) 2013, IIT Madras, July 4 – 6, 2013.
Rameez, A.K. Upadhyay, K.K. Shukla (2013), “Energy absorption in sandwich plates with pyramidal hollow truss core”, Indian Conference on Applied Mechanics (INCAM) 2013, IIT Madras, 4 – 6 July 2013.
VikashYadav, A.K. Upadhyay and K.K.S hukla (2014), “Nonlocal Analysis of Orthotropic Plates,” Int. Conf. on Multifunctional Materials, Structures & Applications (ICMMSA), MNNIT Allahabad, Dec 22-24, 2014.
V.K.Yadav, A.K. Upadhyay and K.K. Shukla (2014), “Nonlinear Static Analysis of Functionally Graded Sandwich Skew Plates,” Int. Conf. on Multifunctional Materials, Structures & Applications (ICMMSA), MNNIT Allahabad, Dec 22-24, 2014.
Kishore Guru, S. B. Mishra and K. K. Shukla (2014), “Functionalization effects on the Interfacial bonding of nanocomposites” International Conference on Multifunctional Materials, Structures and Applications ICMMSA, MNNIT Allahabad, Dec 22-24, 2014.
Hemant K Singh, Ravi Prakash, K. K. Shukla (2015), “Economic and environmental benefits of roof insulation in composite climate of India”, GCCT-2015, MNNIT, Allahabad, 9-11 Oct., 2015.
Hemant K Singh, Ravi Prakash, K. K. Shukla (2015), “Economic and environmental benefits of roof insulation in warm & humid climate of India”, NCPDM-2015, MNNIT Allahabad, 21-22 Nov., 2015.
Sunil K. Singh, Tushar Sharma, V.Murari, K.K. Shukla (2015), “Effect of Airfoil Shape and Taper along the Blade Span on Static and Dynamic Behavior of Wind Turbine Blades”, INCAM 2015, IIT Delhi, July 13-15, 2015.
Rajendra Bahadur, A.K.Upadhyay, K.K.Shukla (2015), “Higher order (2015theory based static analysis of laminated composite doubly curved panels on rectangular plan-form”, Indian Conf. on Applied Mechanics (INCAM 2015), IIT Delhi, July 13-15, 2015.
Sharad Rawat, A.K.Upadhyay and K.K.Shukla (2016), "Crushing analysis of tapered circular corrugated tubes subjected to impact loading," Structural Engineering Convention, SEC2016, CSIR-SERC and IIT Madras, (December 21- December 23, 2016).
Soni Kumari, A.K. Upadhyay, and K.K. Shukla (2016), “ Stress Analysis ofor an Infinite Plate with Circular Holes”, 5th Int. Conf. on Materials Processing and Characterization (ICMPC2016), Hyderabad, March12-13, 2016.
Hemant K Singh, Ravi Prakash, K. K. Shukla (2016), “Economic insulation thickness of external walls in hot and composite regions of India”, GCRE-2016, NIT, Patna, 04-06 March, 2016.
Hemant K Singh, Aadhar Kaushik, Ravi Prakash, K. K. Shukla (2016), “Energy saving potential of natural insulation materials in the built environment”, ARIMPIE-2016, ITS, Gr. Noida, 14-15 April, 2016.
Sharad Rawat, A.K.Upadhyay, K.K.Shukla (2016), “Energy absorption characteristics of Aluminium alloy 6061 square corrugated tubes under axial and oblique impact loading”, 6th Int. Congress on Computational Mechanics and Simulation (ICCMS2016), IIT Bombay, June 27- July 01, 2016.
Rajendra Bahadur, A.K.Upadhyay, K.K. Shukla (2016), “Static analysis of doubly curved fgm panel on rectangular plan-form”, 6th Int. Congress on Computational Mechanics and Simulation (ICCMS 2016), IIT Bombay, June 27- July 01, 2016.
Santanu Choudhury, Tushar Sharma, K.K. Shukla (2016), “Static Response of Wind Turbine Blade under Actual Loading Effect”, ICCMS 2016, IIT Bombay, 91-94, June 27- July 01, 2016.
Tushar Sharma, V.Murari, K.K. Shukla (2016), “Static Analysis of Doubly Tapered Thin Walled Composite Box Beam Under Axial Loading”, ICCMS 2016, IIT Bombay, 1120-1123, June 27- July 01, 2016.
Sharad Rawat, Anirudh Narayanan, A.K.Upadhyay and K.K.Shukla (2016), "Multiobjective optimization of functionally corrugated tubes for improved crashworthiness under axial impact” The 11th International Symposium on Plasticity and Impact Mechanics, IMPLAST 2016, IIT Delhi, December 11 - 14, 2016.
Tushar Sharma, V.Murari and K.K. Shukla (2016), "Static response of thin walled CNT reinforced laminated composite box beam," Structural Engineering Convention, SEC2016, CSIR-SERC and IIT Madras, (December 21- December 23, 2016).
Tushar Sharma, V.Murari, and K.K. Shukla (2017), “ Static analysis of thin walled sandwich composite box beam”, 3rd Indian Conference on Applied mechanics (INCAM 2017), MNNIT Allahabad, 5-7 July 2017.
Aman Khurana, Tushar Sharma, and K.K. Shukla (2017), “Analysis of Thin walled composite box beam with and without piezoelectric actuators using ABAQUS”, 3rd Indian Conference on Applied mechanics (INCAM 2017), MNNIT Allahabad, 5-7 July 2017.
Kuldeep yadav, A.K.Upadhyay, and K.K. Shukla (2017), “Effect of obliquity on ballistic impact response of plain woven fabric”, 3rd Indian Conference on Applied mechanics (INCAM 2017), MNNIT Allahbad, 5-7 July 2017.
Sudhir K Singh, Rajendra Bahadur, A.K.Upadhyaya, and K.K. Shukla (2017), “ Static analysis of functionally graded curved sandwich panel on rectangular plan form”, 3rd Indian Conference on Applied mechanics (INCAM 2017), MNNIT Allahbad, 5-7 July 2017.
Tarun, Rajendra Bahadur, A.K.Upadhyaya, and K.K.Shukla (2017), “ Dynamic analysis of functionally graded curved sandwich panels”, 3rd Indian Conference on Applied mechanics (INCAM 2017), MNNIT Allahbad, 5-7 July 2017.
Aman Khurana, Tushar Sharma and K.K. Shukla (2017), “Optimization of parameters affecting the performance of wind turbine blade using grey relational analysis”, IEEE International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS-2017) at MNNIT Allahabad, Allahabad, February 3-5, pp:- 350-355, 2017.
Mohd Shivali, A. K. Upadhyay, and K.K. Shukla (2018), “Simulation and Analysis of Light Weight Bullet Proof Patka”, First Symposium and Workshop for Analytical Youth on Applied Mechanics (SWAYAM 2018), BITS Pilani, Goa Campus, 9-10, 07/2018, Published by Ane Books Pvt. Ltd.
Rajendra Bahadur, A.K. Upadhyay, and K.K. Shukla (2018), “Nonlinear Static Analysis of Shaloow Panels on Rectangular Plan-Form”, First Symposium and Workshop for Analytical Youth on Applied Mechanics (SWAYAM 2018), BITS Pilani, Goa Campus, 5-6,07/2018, Published by Ane Books Pvt. Ltd.
Sudhir Wakle, Akhileshwar Pandey, A.K. Upadhyay, and K.K. Shukla (2019), “ Numerical Simulation of Lightening Strike on Carbon Fibre Reinforced Laminates”, 4th Indian Conf. on Applied Mechanics (INCAM2019), IISc Bangalore, July 03-5, 2019.
Ashutosh Singh, A. K. Upadhyay, K.K. Shukla (2019), “Low-Velocity Impact Analysis and Energy Absorption Behaviour of Corrugated Core sandwich”, Int. Conf. on Energy, Environment & Material Science (ICE2M), MMMUT Gorakhpur, Dec.01-03, 2019.
T. Sharma, V. Murari, and K. K. Shukla (2019), “ Static Analysis of Wind Turbine Blade using 1D FE Model”, Int. Conf. on Energy, Environment & Material Science (ICE2M), MMMUT Gorakhpur, Dec.01-03, 2019.
Akhileshwar Pandey, A.K. Upadhyay, K.K. Shukla (2019), “Numerical Studies on Damage of Carbon/Epoxy Composites Exposed to Lightening Strike”, Int. Conf. on Energy, Environment & Material Science (ICE2M), MMMUT Gorakhpur, Dec.01-03, 2019.
S.K. Chaudhary, V.R. Kar, K.K. Shukla (2019), “Deformation Behaviour of Functionally Graded Carbon Nanotube Reinforced Composite Panels with Cut-outs under Thermomechanical Loading”, 7th Int. Congress on Computational Mechanics and Simulation (ICCMS2019), IIT Mandi, Dec. 2019.
S.K. Chaudhary, V.R. Kar, K.K. Shukla (2020), “ Free Vibration Analysis of Perforated Laminated Composite Plate”, National Conf. on Materials, Mechanics & Modeling (NCMMM2020), NIT Jamshedpur , Aug.2020.