Ashutosh Mishra

Assistant Professor
Department of Applied Mechanics
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: amishra[at]mnnit[dot]ac[dot]in
Telephone: 7290836647(O) 7290836647(M)

Other Academic Achievements

Keynote Address/Invited Talks in Conferences & Workshops:

DGFS Fellowship by Department of Atomic Energy, Government of India

An insight into the structural integrity assessment considering creep as a governing failure mode. Short Term Course on “Structural Integrity and Reliability (SIR2020)” from Oct 28 – Nov 01, 2020 in MNNIT Allahabad.

Nano fluids: Recent Application and Challenges. Short-Term Course on Advances and in Applications of Nano Fluids at MNNIT Allahabad, October, 2018.[Sponsored by TEQUIP-3]

Nuclear Safety and Security regimes : understanding security levels Conducted a workshop on "Developing Emerging Nuclear Security Practitioners" at Pandit Deendayal Petroleum University, Gandhinagar, November, 2019. in collaboration with Texas A&M

Conferences Attended for Presenting Paper:

1. Dwijendra Dubey, A. Mishra, Ramesh Pandey. Optimization of micro-texturing feature for the improved thermal management of lithium-ion battery module. 2nd International Meeting on Energy Storage Devices (IMESD), 7-10 Dec 2023, IIT Roorkee.

2. Zainab Momin, A. Mishra and Abhishek Kumar, Design modification of cooling channel for improved cooling of lithium-ion batteries. The 64th Battery Symposium in Japan, November 28-30, 2023, Osaka, Japan (Physical Mode).

3. Dwijendra Dubey, A. Mishra, Ramesh Pandey, Thermal runaway and heat propagation analysis of lithium-ion batteries under different abuse conditions. The 64th Battery Symposium in Japan, November 28-30, 2023, Osaka, Japan (Physical Mode).

4. Zainab Momin & A. Mishra. Thermal runaway analysis of lithium-ion battery due cell-to-cell heat propagation. Indian Conference on Applied Mechanics (INCAM 2022), November 11-13, 2022, NIT Jamshedpur.

5. Akansha Pandey & A. Mishra. Analysing the thermal behaviour of fuel cells at different ambient condition. Indian Conference on Applied Mechanics (INCAM 2022), November 11-13, 2022, NIT Jamshedpur.

6. Vishesh Shukla, A. Mishra, R.P.Tewari. Experimental analysis of failure progression of Lithium ion battery under lateral and longitudinal compression. Advancements in Interdisciplinary Research (AIR-2022). May 6-7, 2022, MNNIT Allahabad.

7. Dwijendra Dubey, A. Mishra, Taufeeq Ahmad, Ramesh Pandeya. Influence of geometry changes on the cooling performance of Lithium ion battery. Advancements in Interdisciplinary Research (AIR-2022). May 6-7, 2022. MNNIT Allahabad.

8. Vineet, Priyanshu Gupta, A. Mishra, Abhishek Kumar Tiwari and Naveen. Effect of heat treatment on the time dependent behavior of 3D printed SS-316L specimen. Indian Conference on Applied Mechanics (INCAM 2022), November 11-13, 2022, NIT Jamshedpur.

9. M. Zubairuddin, S. K. Albert, M. S. Reddy, B. Ali, B. Varaprasad, A. Mishra, P. K. Das & P. V. Elumalai. Thermal Analysis of Thin Grade 91 steel using FlexPDE and SYSWELD. 2nd International Conference & Exposition on Advances in Mechanical Engineering (ICAME-2022), June, 23-25, 2022. College of Engineering Pune (COEP).

10. Shashi Kala, A. Mishra, Vishesh Shukla (2020). Battery Technologies and its future prospects. Energy and Environmental Technologies for Sustainable Development (CHEM-CONFLUX2020), Feb 14-16, 2020. MNNIT Allahabad. DOI: 10.5281/zenodo.5657123

11. Henry Isaac, A. Mishra, And Abhishek Kumar Tiwari. Computational assessment of inter vertebral disc bulging with postural change. Indian Conference on Applied Mechanics (INCAM 2019), July, 3-5, 2019, IISc Bangalore.

12. A. Mishra, R. Suresh Kumar,G. Sasikala and P. Chellapandi. Temperature rate dependent modelling of thermal ratcheting behaviour. Indian Conference on Applied Mechanics (INCAM 2017), July 5-7, 2017, MNNIT, Allahabad.

13. A. Mishra, R. Suresh Kumar, G. Sasikala and P. Chellapandi. Significance of thermo-mechanical interaction in thermal ratcheting behavior. 7th International Conference on Creep, Fatigue and Creep fatigue Interaction (CF-7), January 19-22, 2016, Indira Gandhi Centre for Atomic Research, Kalpakkam, India

14. A. Mishra, P. Chellapandi, R. Suresh Kumar and G. Sasikala. Effect of Temperature Rate Term while Predicting Thermal Ratcheting of a Thin Cylinder due to Cyclic Temperature Variation. International Symposium for Research Scholars on Metallurgy, Materials Science and Engineering (ISRS-2014), Dec-11-12, 2014, IITM, India.

15. A. Mishra, R. Suresh Kumar, G. Sasikala and P. Chellapandi. Influence of the frequency of level fluctuations with reference to progressive deformation of thin cylindrical shell. First International conference on Structural Integrity (ICONS-2014), Feb-4-7, 2014, IGCAR, Kalpakkam.

16. A. Mishra, R. Suresh Kumar and P. Chellapandi. Shakedown study of thin cylindrical shell due to moving temperature distribution using Combined Hardening Chaboche Model. Indian Conference on Applied Mathematics (INCAM 2013), 4th-6th July 2013, IIT Madras, India.

17. A. Mishra, R. Suresh Kumar and P. Chellapandi. Simulation of Thermal Ratcheting of thin cylindrical shell due to moving temperature distribution using Combined Hardening Chaboche Model. International Conference on Pressure Vessel and Piping (OPE 2013), 13th-16th February, 2013, IGCAR, Mamallapuram, Chennai, India

Award and Honors:

Best Poster Award in 2nd International Meeting on Energy Storage Devices (IMESD), 7-10 Dec 2023, IIT Roorkee

On-going Projects:

Title: Determination of poroelastic parameter (Biot’s constant) of an ablative decomposing composites (anisotropic) material under high temperature for aerospace launch vehicle application”. Funding Agency: ISRO Fund Allotment: 2671840 Rs. Duration: 2024-2026

Title: Light weight wagon for transporting commodities like salt Funding Agency: Indian Railways Fund Allotment: 2.6 crores Rs. Duration: 2023-2025

Title: Design and Development of Biomechanical Therapeutics to Mitigate Osteoporosis in Postmenopausal Women with Diabetes Mellitus Domain: Biological Sciences Funding Agency: MOE Stars Fund Allotment: 3500000 Rs. Duration: 2023-2025

Computational Modelling for Design of Insensitive Munitions to Mitigate Sympathetic Detonation in Explosive Warheads and Munitions (HEMRL, DRDO, 39 Lakhs, 2 Years)

Consultancy(Past):

Finite Element Analysis of Bogie. (Rotomac Electricals Pvt Ltd., Kolkata, 700016). 2.0 Lakhs.

Overseas Assignments:

“Finite element analysis of novel shoulder implant”. University of Maryland, USA, 18000 USD.

Reviewer for Transactions / Journal / Conferences:

Latin American Journal of Solids and Structures (SCI-IF=1.289).

Journal of Materials Engineering and Performance (SCI-IF=1.652).

Journal of Energy Storage (SCI-IF =9.4)

Energy Technology (SCI-IF =3.8)

Heliyon (SCI-IF=3.4)

Defence Science Journal (SCI-IF=0.667)

“Finite element analysis of novel shoulder implant”. University of Maryland, USA, 18000 USD.

Books Reviewed:

Recent Developments in Mechanics and Design (Select Proceedings of INCOME 2023) in book series of Lecture Notes in Mechanical Engineering (LNME), Springer Publication

Other Significant Achievements:

Title: Development of open cathode polymer electrolyte membrane based air-cooled fuel cells for hydrogen mitigation during cold trap regeneration, Funding Agency: BRNS, DAE Government of India Amount: 3500000 Rs