Associate Professor
Department of Mechanical Engineering
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: pka[at]mnnit[dot]ac[dot]in
Telephone: +915322271522(O) +918081622278(M)
S.No | Research Topic | Name of Student | Completion/Registration Year | Ph.D. Completed: |
---|---|---|---|
1 | Optimization and Control of Active Magnetic Bearings | Anand Shivanappa Reddy | 2016 |
2 | Modelling and Control of Conical Active Magnetic Bearing | Arvind Katyayn | 2020 | Ph.D. Ongoing |
1 | Condition Monitoring of Gear Systems | Sheo Kumar | 2017 |
2 | Design and Control of Hybrid Foil-Magnetic Bearing | Nisha Singh | 2018 |
3 | Condition monitoring of worm gearbox-bearing system using Deep Learning | Anurag Srivastava | 2021 |
4 | Thermal management of Lithium-ion battery pack | Rustam Khan | 2022 | M.Tech Students |
1 | Nonlinear control of spark ignition engine | Lokesh Kumar Gupta (2006CC04) | 2008 |
2 | Fuzzy logic control of permanent magnet biased magnetic bearings | Jagdish Prasad (2008DN12) | 2010 |
3 | Fault-Diagnosis of Active Magnetic Bearings | Ayaz Ahmed (2009CC08) | 2011 |
4 | Improved Design of Ergonomically-oriented Wheelchair | Amit Kumar Pal (2010PD03) | 2012 |
5 | Dynamic Analysis of Active Magnetic Bearings | Swati Sachan (2010CC02) | 2012 |
6 | Optimized Design of Active Magnetic Bearings | Mohit Jain (2010CC08) | 2012 |
7 | B-spline based Optimized heterogeneous modelling | Ashish Murarka (2011PD14) | 2013 |
8 | B-spline surface reconstruction based on genetic algorithm | Deep Chandra Chaurasiya (2011CC22) | 2013 |
9 | Fault detection and diagnosis of active magnetic bearing systems | Mohammad Waseem (2011CC07) | 2013 |
10 | Fault Diagnosis of Journal Bearing System | Ashish Dwivedi (2012CC01) | 2014 |
11 | Fault Diagnosis of Roller Bearing System | Vivek Khare (2012DN02) | 2014 |
12 | Performance evaluation of Automated controlled EGR-VGT CI Engine | Apurva Tiwari (2012DN24) | 2014 |
13 | Fault Diagnosis of Gearbox | Anurag Srivastava (2013PD01) | 2015 |
14 | Neural Network based method for Surface Reconstruction | Shashank Shukla (2013PD14) | 2015 |
15 | Effect of Pole Geometry on Active Magnetic Bearing Performance | Vishnu Dev Mishra (2014CC13) | 2016 |
16 | Fault detection and diagnosis of Worm gear box | Harishanker Maurya (2015CC10) | 2017 |
17 | Evaluation of effect of geometric parameters on hybrid journal bearing performance | Nisha Singh (2015CC11) | 2017 |
18 | Control of Twin Rotor systems and its implementation | Shashi Nath Mishra (2015CC07) | 2017 |
19 | Control of Rotary Inverted Pendulum systems and its implementation | Roopak Varshney (2015CC02) | 2017 |
20 | Fault Detection and Diagnosis of Rotor-Ball Bearings system | Prince Shukla (2016CC04) | 2018 |
21 | Evaluation of Degradation of Automotive Components due to Road Conditions | Arun Kumar Yadav (2017CC18) | 2019 |
22 | B-Spline based Modelling and Analysis of Wind Turbine Blade | Rajeev Kumar (2017CC21) | 2019 |
23 | Design and Analysis of Asymmetric Gears | Aseem Jain (2017DN11) | 2019 |
24 | Fault Detection and Diagnosis of Bearings | Tushar Pandey (2018PD13) | 2020 |
25 | Fault Detection and Diagnosis of Gears | Lovekesh Kumar (2018DN10) | 2020 |
26 | Design improvement of lithium-ion batteries for electric-vehicle applications | Rustam Khan (2019PD18) | 2021 |
27 | Deep-learning based fault detection and diagnosis of rotary mechanical systems | Atul Kumar (2019CC06) | 2021 |
28 | Static Analysis of Hybrid Bearings | Sukhdev Ashish (2019DN06) | 2021 |
29 | Evaluation of rail wheel impact responses caused by wheel and rail defects | Durgesh Kumar (2019PD03) | 2021 |
30 | AI based Diagnosis using Medical Imaging | Tushar Anand Sisodia (2020CC21) | 2022 |
31 | Hand Gesture recognition using Deep Learning | Srishti Singh (2020DN22) | 2022 |
32 | AI based Fault Detection and Diagnosis | Zeeshan Ahmed (2020CC23) | 2022 |
33 | Fault Diagnosis of Rotary Systems with Multiple Faults | Arghya Mitra (2021CC23) | 2023 |
34 | AI based Diagnosis using Medical Imaging | Neeraj Rahi (2021CC29) | 2023 |
35 | Dynamic Hand Gesture Identification using Machine Learning | Vishal Kumar (2021DN20) | 2023 |
36 | Design and analysis of Progressive Die | Sudhakar Dubey (2022CC03) | 2024 |
37 | Design and development of High Voltage Converter for Hand-Held Portable X-Ray Generator | Anam Jaiswal (2022PD04) | 2024 | B.Tech Students |
1 | Design and Development of a Bomb Disposal System | Mandar Avinash Pawde (2003371) Ashish Gupta (2003325) Manas Tripathi (2003341) Sanjay Kumar Kamal (2003344) | 2007 |
2 | Design of magnetic bearing for operation near saturated region of magnetic bearing material | Neelarka Dutta (20041049) Himanshu Kesarwani (20047003) Vipul Jain (20047047) Alok Kumar (20047046) | 2008 |
3 | Evaluation of effect of design parameters of active magnetic bearing | Apurva (20051019) Ravikant Singhania (20053037) Suraj Yadav (20058050) Soumya Soren (20043008) | 2009 |
4 | Modelling and control of a micro-electro-mechanical system | Nitish Jarwal (20067059) Arnab Mukherjee (20067062) S Pankaj Kumar (20066012) J Yaswanth (20067048) | 2010 |
5 | Voice Identification using Neural Network | Bhavna Sharma (20073003) Anant Choudhary (20072014) Ankit Kaul (20073065) K. Avish (20053036) | 2011 |
6 | Redesigning of electric bicycle | Sandip Garg (20088032) Saambavi Karunakaran (20083096) Sagar Gera (20081042) Tushar Bhargava (20083081) Vishva Prakash (20083068) Ritesh Ranjan (20083063) | 2012 |
7 | Automatic car parking system | Ashish Sajwan (20093101) Ashwani Agrawal (20093060) Deepak Upadhyay (20091043) Anup Chandra Gupta (20093030) Anubhav Kumar (20098035) Manoj Kumar (20093111) | 2013 |
8 | Design of Centralized Hydraulic Suspension System for Comfort Ride | Manish Kumar Gautam (20103009) Mohammad Amir (20103019) Prakash Pun (20103120) Sagar Gupta (20108061) Rajeev Kumar Ram (20103025) | 2014 |
9 | Corner adapting headlights system | Siraj Mohammad (20113094) Sarvagya Katiyar (20113059) Bimal Kant Kamal (20103020) | 2015 |
10 | Hand tool design for better functionality and safety | Prabhat Kumar (20123100) Pawan Kumar (20125098) | 2016 |
11 | Design and fabrication of portable wind power generation system | Anubhav Gokhale (20133078) Anish Raj (20133083) Prateek Kumar (20133117) Anil Kumar (20133129) Arvind Kumar Dwivedi (20133073) | 2017 |
12 | Design and fabrication of a Dynamometer | Shreya Agrawal (20136014) Prashant Yadav (20136028) Rohan Mehra (20136025) Rohitash Yadav (20136005) Ashish Kumar (20136013) Raja Ram Meena (20136051) | 2017 |
13 | Design and fabrication of Pneumatic Booster attachment for Bicycle | Sundaram Chitransh (20143035), Ashish Rai (20141061), Vivek Jaiswal (20143112) and Vivek Kumar (20143133) | 2018 |
14 | Artificial Intelligence based navigation of a Mobile Robot in a cluttered environment | Anand Mohan Dwivedi (20141045) Pratik Gyawali (20143013) Prasant Kumar (20142071) Tenzing Dhaden Gurung (20143007) | 2018 |
15 | Implementation of position control in Rotary Table and XY Positioning Table by using Arduino platform | Rajat Gautam (20153084) Saurabh Shukla (20153058) Sarwadhar Singh (20153033) Ravinder Singh (20153041) | 2019 |
16 | Development of an apparatus to determine bidirectional thermal conductivity | Abhishek Pandey (20163003) Ch. Umashankar Shastry (20163075) | 2020 |
17 | Development of an FDM based 3D printer | Soumya Khanna (20169040) Sonu Kumar (20163119) Md. Maaz Latifee (20163099) | 2020 |
18 | Design of a Semi-Active Suspension System | Vikram Pratap Singh (20173117) Suyash Gupta (20173039) Shivam Tulshyan (20173122) | 2021 |
19 | Design and Development of a Ventilator | Rishabh Tripathi (20173006) Rounak Gajbhiye (20173074) Ravi Nirajan Yadav (20173068) | 2021 |
20 | Prediction of Fault in Reciprocating Air Compressor using Machine Learning | Harshit Gupta (20186056) and Portia Rani (20186045) | 2022 |
21 | Design of Bladeless Wind Turbine | Ayush (20183056), Deeksha Verma (20183096) and Rajat Kamal (20183012) | 2022 |
22 | Design and development of Biometric System for Automobiles | Ashish Chaurasia (20193030), Gunjan Singh (20193045), Ankit Kushawaha (20193052) and Aman Singh Gautam (20193056) | 2023 |
23 | Design and Development of a Gesture Controlled Prosthetic Bionic Arm | Shivam Singh (20203141), Vivek Kumar Meena (20203163) and Shivam Rana (20203140) | 2024 |
24 | Smart Speed Controller using Google Maps API | Manish Singh (20206025), Nikhil Kulkarni (20206029) and Shubham Kumar Singh (20206052) | 2024 |