Dr. Audhesh Narayan
Professor
Department of Mechanical Engineering
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: anarayan[at]mnnit[dot]ac[dot]in
Telephone: 05322271517(O) 9794259712(M)
Thesis Supervised
| S.No | Research Topic | Name of Student | Completion/Registration Year | Ph.D. Completed: |
|---|---|---|---|
| 1 | Finite Element Modeling and Optimization of Electro-Discharge Micromachining | Ajay Suryavanshi | 2016 |
| 2 | Development and Performance Study of Ultrasonic Assisted Micro-Electrical Discharge Machining Process for Aerospace Superalloys | Param Singh | 2018 |
| 3 | Experimental Modeling and Multi-Objective Optimization of Traveling Wire Electrochemical Spark Machining of Polymer Nanocomposites | Pallvita Yadava | 2019 |
| 4 | Development and Performance Study of Electrochemical Diamond Face Grinding for Aerospace Superalloys | Shyam Bihari Kausal | 2023 | Ph.D. Ongoing |
| 1 | Development and Performance Study of Electrochemical Diamond Cut-off Grinding (ECDCG) | Raju Singh | 2017RME03 |
| 2 | Development, Modelling and Optimization of Milling Electro-Chemical Spark Micromachining of Polymer Matrix Nanocomposite | Kriti Sahai | 2018RME52 |
| 3 | Development, Modelling and Optimization of Wire Electrochemical Spark Machining (W-ECSM) Process for Curve Profile Cutting of Polymer Nanocomposites | Harishanker Maurya | 2018RME06 |
| 4 | Experimental and Finite Element Modeling of Friction Stir Welding | Pooja Singh | 2020RME07 |
| 5 | Wire Electro-Discharge Machining | Sunil | 2021RME56 |
| 6 | Electrochemical Spark Machining | Abhimanyu Yadav | 2023RME03 | M.Tech Students |
| 1 | Experimental Study of Electric Discharge Machining of Difficult to Machine Materials using Design of Experiment | Abhishek Khare | 2008 |
| 2 | Thermal Stresses in High Efficiency Deep Grinding | Om Prakash Ahirwar | 2008 |
| 3 | Effect of Heat Source Profiles in Temperature Distribution within the Workpiece during High Efficiency Deep Grinding | Mahip Upadhyay | 2010 |
| 4 | Finite Element Modeling and Optimization of High Efficiency Deep Surface Grinding for Temperature and MRR | Dharma Pal Singh | 2012 |
| 5 | Modeling of Specific Energy Requirements in Deep Surface Grinding Processes | Pramod Kumar Yadav | 2012 |
| 6 | Modeling and optimization of process parameters in creep feed surface grinding | Ram Rakesh Singh | 2012 |
| 7 | Thermal analysis of Micro-electric discharge machining process | Deepak Prashant Singh | 2013 |
| 8 | Neural network modeling and optimization of laser beam drilling process | Param Singh | 2013 |
| 9 | Finite element modeling and optimization of die sinking electrochemical spark machining process | Gaurav Kumar Sharma | 2013 |
| 10 | Modeling and optimization of electric discharge machining process | Swati Gupta | 2013 |
| 11 | Modeling and Optimization of Peripheral Surface Grinding Process | Ramesh Kumar | 2014 |
| 12 | Finite Element Prediction of Material Removal Rate Due to Wire Electrical Discharge Machining (Wire-EDM) | Ashwani Sharma | 2014 |
| 13 | Design, Fabrication and Performance Study of Modified Basin Type Single Slope Multi-wick Solar Distillation System | Suresh Kumar | 2014 |
| 14 | Effect of Hard Turning on Microstructural and Mechanical Properties of Workpiece Material | Maloth Bhikya Naik | 2015 |
| 15 | Three Dimensional Finite Element Thermal Analysis of Creep Feed Deep Surface Grinding | Subhas Singh | 2015 |
| 16 | Thermal Study of Hard Turning | Saurabh Verma | 2016 |
| 17 | Modeling and Optimization of Hard Turning Process | Pankaj Kumar Srivastava | 2016 |
| 18 | Three Dimensional Finite Element Thermal Analysis of Workpiece during Wire EDM Process | Princy Pandey | 2016 |
| 19 | Design and Development of Experimental Setup for Milling EDM | Anurag Chaudhary | 2017 |
| 20 | Thermal Stress Analysis of Hard Turning Process | Vishal Kumar | 2017 |
| 21 | Development and Machining Performance Study of Al6082 Metal Matrix Composite using Sinking EDM | Atul Kushwaha | 2017 |
| 22 | Modeling and Multi-Objective Optimization of Sinking EDM Process using Al6082 Metal Matrix Composite | Shailendra Kumar | 2017 |
| 23 | Modeling and Optimization of Electrochemical Abrasive Grinding | Madan Mohan Mishra | 2018 |
| 24 | Modeling and Optimization of Wire EDM Process | Vibhanshu Kumar Tripathi | 2018 |
| 25 | Development and Performance Study of Electrochemical Cut-Off Grinding Setup | Vinayak Kumar Gautam | 2019 |
| 26 | Development and Performance Study of Drilling Electrochemical Spark Machining Setup | Krishna Chandra Tiwari | 2019 |
| 27 | Some Experimental Investigations on Wire Electrochemical Spark Machining | Ravi Prakash | 2019 |
| 28 | Development of Wire-Electrochemical Spark Machining (Wire-ECSM) set up for profile cutting in non-conducting materials. | Deepak Kumar Gautam | 2020 |
| 29 | Development of experimental set up for Milling Micro-Electrochemical Spark Machining (Milling Micro-ECSM) | Menda Meena Ketan | 2020 |
| 30 | Development of experimental set up for CNC Milling EDM | Ranjeet Singh | 2020 |
| 31 | Thermal Finite Element Analysis of Electrochemical Machining Discharge Machining (ECDM) Process | SHIVALI | 2021 |
| 32 | Finite Element Analysis of Laser Cladding Process | Devendra Kumar Gautam | 2021 |
| 33 | Thermal Stress Analysis of Friction Stir Welding | Nishant Srivastava | 2022 |
| 34 | Performance Prediction of Travelling Wire Electrochemical Spark Machining of Alumina using Finite Element Method | Shibhit Srivastava | 2023 |
| 35 | Effect of Insertion of Vane Diffuser between Compressor and Bearing Housing to Sustain High Pressure Ratio in Turbocharger | Krishn Kumar Gupta | 2023 |
| 36 | Study of Welding Performance of Dissimilar Al Alloys Welded by Friction Stir Welding | Saurabh Kumar | 2023 | B.Tech Students |
| 1 | Numerical study of Wire Arc Additive Manufacturing | Prashasti Bhai Patel (20173058), Rahul Kumar(20173013) Shivam Yadav (20173064) | 2021 |
| 2 | Determination of Temperature and Thermal Stresses in High Efficiency Deep Surface Grinding | Pulkit Mathur, Nakul Gupta, Renu Khatri, Himanshu Joshi, Vasu Raj, Vinay Sehgal | 2012 |
| 3 | Thermal Analysis of High Efficiency Deep Surface Grinding | Devesh Bajpai, Gaurang Gupta, Dinesh Kumar, Avnish Tripathi, Bijay Kumar Pandit | 2013 |
| 4 | Modeling and Optimization of Traverse Cut Cylindrical Grinding | Mohd. Juber Ahmad, Madhusudan Baghel, Rishi Tripathi, Brijendra Kumar, Rajendra Prasad and Pawan Singh Brijwal | 2014 |
| 5 | Design and Fabrication of Dynamometer for Measurement of Cutting Force in Turning Process | Saurabh Kumar, Ankit Srivastava | 2015 |
| 6 | Fabrication and Mechanical Testing of Al-Alumina Metal Matrix Composite | Raghav Bhatia Mukul Kumar Verma Niranjan Oli | 2015 |
| 7 | Thermal Analysis of Turning Processes | Rohit Kumar Vinayak Mudgal | 2016 |
| 8 | Design and Fabrication of Experimental Setup for V and Edge Bending | Vikas Bharti, Ashish Verma, Niteesh Pant, Rahul Maddheshiya, Vivek Kumar Singh | 2017 |
| 9 | Design and Fabrication of Permeability Tester for Determination of Permeability of Green Sand | T. Vaishnav Reddy (20146046), T. Sai Raman (20146034), Tarun Kumar (20146022), G. Sujith (20146047) | 2018 |
| 10 | Design and Fabrication of Die for Mechanical Power press | Yogendra Singh (20143069), Shivam Mishra (20143052), Neeraj Kumar Kharwar (20143116), Abhay Kumar (20143058) | 2018 |
| 11 | Development and Performance Study of Laser Engraving and Cutting Machine | Abhishek Kumar Verma (20153019), Raj Singh Sodha (20153067), Bibek Shah (20153001), Bhpendra Bokati (20153126) | 2019 |
| 12 | Design, Modeling and Simulation of Micro-USM | Anubhav Potadey (20161026), Anurag Sachan (20163041) | 2020 |
| 13 | Modeling and Simulation of Micro-Electrochemical Machining for Material Removal Rate | Gaurav Sachan (20163056), Manoj Kumar (20163072), Jeetendra Kumar ( 20163039) | 2020 |
| 14 | Numerical study of Wire Arc Additive Manufacturing | Prashasti Bhai Patel (20173058), Rahul Kumar(20173013) Shivam Yadav (20173064) | 2021 |
| 15 | Design and development of experimental setup for Electro Spark Cutting of Metal | Md. Naveed Amir (20173084), Virat Singh (20173067) ,Md. Sadaqat Hussain (20173042) | 2021 |
| 16 | Finite Element Simulation of Laser Micro-Drilling of Orthopaedic Implant Material | Devanshu Kumar (20186050), Pragati Awasthi (20186026), Rohit Kumar (20186053) | 2022 |
| 17 | Finite Element Thermal Analysis of Laser Assisted Hard Turning | Vipin Sahu( 20186052), Saurav Shekhar (20186017), Raj Shekhar Saroj (20186019) | 2022 |
| 18 | Design and Fabrication of Automated Garbage Collection System | Abhishek Singh (20193024), Rahul Singh (20193032), Augusthay Kumar Gautam (20193054), Ankit Pandey (20193073) | 2023 |
| 19 | Simulation of Creep Feed Surface Grinding | Rahul Modi (20206034), Latchireddi Ekalavya (20203086), Govind Vallabh (20203106), Sarthak Anil (20203131) | 2023 |