Dr. Abhishek Kumar



Dr. Abhishek Kumar

Professor
Department of Applied Mechanics
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: abhishek[at]mnnit[dot]ac[dot]in
Telephone: 05322271209(O) 05322271708(R)

Research Publications



Book Chapter:

B. Kranthi Kumar, Rahul Singh, and Abhishek Kumar, "Effect of Nanoparticles Dispersion in High Entropy Alloys: A Brief Review" Industrial Application of Nanoscience and Nanotechnology, Volume-1, Chapter -11, Pages 127-135, December 2020. (ISBN:978-93-89947-256-7)

Journals:

Rahul Singh, Samarjit Singh, B Kranthi Kumar and Abhishek Kumar, “Mechanical behaviour and corrosion study of 304L austenitic steel processed by constrained groove pressing”, Indian Journal of Engineering and Materials Sciences, 28, 258-264 (2021). (SCI: Impact factor- 0.881)
Naveen Kumar, Ajaya Bharti, Abhishek Kumar and Abhishek Nigam, “Effect of process parameters on the crystal- parameters of cu-zn spinel-ferrites”, Materials Physics and Mechanics 47, 65-73, (2021). (Scopus Indexed) http://dx.doi.org/10.18149/MPM.4712021_7
Rahul Singh, Shubham Agrahari, Surya Deo Yadav and Abhishek Kumar, “Microstructural evolution and mechanical properties of 316 austenitic stainless steel by CGP”, Materials Science & Engineering A, Article id: 141105, 2021. (SCI: Impact factor- 4.652) https://doi.org/10.1016/j.msea.2021.141105
Rahul Singh, Surya Deo Yadav, Biraj Kumar Sahoo, Sandip Ghosh Chowdhury and Abhishek Kumar, “Phase transformation, mechanical properties and corrosion behavior of 304L austenitic stainless steel rolled at room and cryo temperature”, Defence Science Journal, 71(3), 383-389, 2021. (SCIE: Impact factor- 0.730) https://doi.org/10.14429/dsj.71.16721
Abir Roy and Abhishek Kumar, “Corrosion behaviour of Multiaxial compressed AlMgSi alloy”, Defence Science Journal, 71(3), 359-364, 2021. (SCIE: Impact factor- 0.730) https://doi.org/10.14429/dsj.71.16723
Rahul Singh, Deepak Sachan, Deepak Singh, Surya Deo Yadav, Abhishek Kumar, “Microstructural Evolution and Mechanical Properties of Constrained groove pressed 304 Austenitic Stainless Steel”, Journal of Materials Engineering and Performance, 30, 290-301, 2020. (SCIE: Impact factor-1.652) https://doi.org/10.1007/s11665-020-05372-x
Sushil Kumar Singh, Abhishek Kumar and Anuj Jain “Mechanical and viscoelastic properties of SiO2/epoxy nanocomposites post-cured at different temperatures”, Plastics, Rubber and Composites: Macromolecular Engineering, 50(3), 116-126, 2021. (SCI: Impact factor- 1.543) http://dx.doi.org/10.1080/14658011.2020.1840203.
Samarjit Singh, Abhishek Kumar, Dharmendra Singh, “Enhanced microwave absorption performance of SWCNT/SiC composites” Journal of Electronic Materials, 49(12), 7279-7291, 2020. (SCI: Impact factor-1.774) https://doi.org/10.1007/s11664-020-08460-9
Yogesh Iyer Murthy, Sumit Gandhi, Abhishek Kumar, “Assessment of current and potential applications of magnesium alloys in construction industry”, Interciencia, Vol. 45 (5), 21-39, 2020. (Scopus; SCIE: Impact factor-0.343)
Abir Roy, Manish Tiwari, Sandeep Sahu, Sumeet Mishra and Abhishek Kumar “Microstructure, texture and mechanical properties of Al-Mg-Si alloy processed by multi-axial compression”, Journal of Materials Engineering and Performance, 29(6), 3876–3888, 2020. (SCIE: Impact factor-1.652) DOI: 10.1007/s11665-020-04917-4
Samarjit Singh, Abhishek Kumar, Smriti Agarwal, Dharmendra Singh, “Synthesis and tunable microwave absorption characteristics of flower-like Ni/SiC composites” Journal of Magnetism and Magnetic Materials, Vol. 503, Article 166616, 2020. (SCI: Impact factor-2.683) https://doi.org/10.1016/j.jmmm.2020.166616
Yogesh Iyer Murthy, Sumit Gandhi, Abhishek Kumar, “Magnesium alloy anodes for corrosion prevention of reinforcements in concrete”, International Journal on Emerging Technologies, Vol.11, Issue 2, 656-661, 2020. (Scopus Indexed)
Samarjit Singh, Abhishek Kumar, Dharmendra Singh, “Improved microwave absorption behavioral response of Ni/SiC and Ni/SiC/Graphene composites: A comparative insight” Journal of Alloys and Compounds, Vol. 823, Article 153780, 2020. (SCI: Impact factor-4.175) https://doi.org/10.1016/j.jallcom.2020.153780
Yogesh Iyer Murthy, Sumit Gandhi, Abhishek Kumar, “Micro characterization of pure Mg and AZ91D used as sacrificial anodes in reinforced cement concrete” , International Journal of Science Technology and Research, Vol.8 (11), 400-403, 2019. (Scopus Indexed)
Sushil Kumar Singh, Deepak Singh, Abhishek Kumar and Anuj Jain, “An analysis of mechanical and viscoelastic behavior of nano-SiO2 dispersed epoxy composites”, Silicon, Vol. 12(10), 2465-2477, 2019. (SCIE: Impact factor-1.281) https://doi.org/10.1007/s12633-019-00335-x
Singh S., and Kumar A, “Selection of Core shell Material based Electromagnetic Wave Absorbers in 2 to18 GHz using TOPSIS and VIKOR Ranking Methods”, Defence Science Journal, 69(5), 431-436, 2019. (SCIE: Impact factor- 0.730) https://doi.org/10.14429/dsj.69.14946
Saurabh, Maurya A. K., Singh S., and Kumar A, “Microwave Absorption Performance of Graphene Nanoplatelets Dispersed SiC”, Defence Science Journal, 69(5), 437-441, 2019. (SCIE: Impact factor- 0.730) https://doi.org/10.14429/dsj.69.14946
Yogesh Iyer Murthy, Sumit Gandhi, Abhishek Kumar, “Corrosion Mitigation of Reinforcement in Concrete using Magnesium Anodes”, International Journal of Recent Technology and Engineering, Vol. 8(4), 1950- 1956, 2019. (Scopus Indexed) doi: 10.35940/ijrte.c6272.118419
Shadma Afzal, Preeti Sirohi, Alok Kumar Yadav, Manish Pratap Singh, Abhishek Kumar, Nand K.Singh, “A comparative screening of abiotic stress tolerance in early flowering rice mutants”, Journal of Biotechnology, Vol. 302, 112-122, 2019. (Scopus Indexed: Impact factor-3.163) https://doi.org/10.1016/j.jbiotec.2019.07.003
Rahul Singh, Surya Deo Yadav, Nikhil Malviya, Sunkulp Goel, R. Jayaganthan & Abhishek Kumar, “Finite Element Analysis and Mechanical Behavior of 316L Stainless Steel Processed by Room Temperature Rolling”, Materials Science Forum, Vol. 969, 508-516, 2019. (Scopus Indexed) https://doi.org/10.4028/www.scientific.net/MSF.969.508
Rahul Singh, Gaurav Rajan, B. Kranthi Kumar, Raviraj Verma, R. Jayaganthan & Abhishek Kumar, “Numerical Analysis of Constrained Groove Pressing and Mechanical Behaviour of Processed 316L Stainless Steel”, Materials Science Forum, Vol. 969, 901-908, 2019. (Scopus Indexed) https://doi.org/10.4028/www.scientific.net/MSF.969.901
Abhishek Kumar, Samarjit Singh, and Dharmendra Singh, “Effect of heat treatment on morphology and microwave absorption behavior of milled SiC” Journal of Alloys and Compounds, Vol. 772, 1017-1023, 2018. (SCI: Impact factor-4.175) https://doi.org/10.1016/j.jallcom.2018.09.136
Yogesh Iyer Murthy, Sumit Gandhi, Abhishek Kumar, “Comparative Study of Pure Mg and AZ91D as Sacrificial Anodes for Reinforced Cement Concrete Structures in Chloride Atmosphere”, Civil Engineering Journal, Vol. 4 (8), 1750-1759, 2018. (Scopus Indexed) DOI: 10.28991/cej-03091110
Samarjit Singh, Ankur Sinha, Raj H Zunke, Abhishek Kumar, and Dharmendra Singh, “Double layer microwave absorber based on Cu dispersed SiC composites”, Advanced Powder Technology, Vol. 29 (9), 2019-2026, 2018. (SCI: Impact factor-3.250) https://doi.org/10.1016/j.apt.2018.05.008
Samarjit Singh, Sankalp Shukla, Abhishek Kumar and Dharmendra Singh “Influence of Zn dispersion in SiC on electromagnetic wave absorption characteristics”, Journal of Alloys and Compounds, Vol. 738, 448-460, 2018. (SCI: Impact factor-4.175) https://doi.org/10.1016/j.jallcom.2017.12.190
Sushil Kumar Singh, Samarjit Singh, Abhishek Kumar and Anuj Jain, “Thermo-mechanical behavior of TiO2 dispersed epoxy composites”, Engineering Fracture Mechanics, Vol. 184, 241-248, 2017. (SCI: Impact factor-2.908) https://doi.org/10.1016/j.engfracmech.2017.09.005
Abhishek Kumar, Vijaya Agarwala and Dharmendra Singh, “Microwave absorbing behavior of metal-dispersed TiO2 nanocomposites”, Advanced Powder Technology, Vol. 25, 483–489, 2014. (SCI: Impact factor-3.250) https://doi.org/10.1016/j.apt.2013.07.006
Abhishek Kumar, Vijaya Agarwala and Dharmendra Singh, “Effect of milling on dielectric and microwave absorption properties of SiC based composites”, Ceramic International, Vol. 40(1), 1797-1806, 2014. (SCI: Impact factor-3.450) https://doi.org/10.1016/j.ceramint.2013.07.080
Abhishek Kumar, Vijaya Agarwala and Dharmendra Singh, “Effect of Particle Size of BaFe12O19 on the Microwave Absorption Characteristics in X-Band”, Progress in Electromagnetics Research M, Vol. 29, 223-236, 2013. (Scopus Indexed) doi:10.2528/PIERM13011604
D. Singh, A. Kumar, S. Meena, and V. Agarwala, “Analysis of frequency selective surfaces for radar absorbing materials”, Progress in Electromagnetics Research B, Vol. 38, 297-314, 2012. (Scopus Indexed) doi:10.2528/PIERB11121601
Abhishek Kumar, Vijaya Agarwala and Dharmendra Singh, “Effect of Mg substitution on microwave absorption of BaFe12O19”, Advanced Materials Research, Vol. 585, 62-66, 2012. (Scopus Indexed) https://doi.org/10.4028/www.scientific.net/AMR.585.62
Sushil Kumar Singh, Dheeraj Gunwant, Ajitanshu Vedrtnam, Abhishek Kumar and Anuj Jain “Synthesis, Characterization, and Modelling the Behavior of in-situ ZrO2 Nanoparticles Dispersed Epoxy Nanocomposite” Engineering Fracture Mechanics, Accepted 2022. (SCI: Impact factor- 4.406) https://doi.org/10.1016/j.engfracmech.2022.108300
Rahul Singh, Sunkulp Goel, R. Jayaganthan and Abhishek Kumar, “Studies on microstructure evolution, mechanical and corrosion behaviors of cryo-rolled 316L steel” Journal of Materials Engineering and Performance, 31, 9660–9669, 2022. (SCIE: Impact factor-1.819) https://doi.org/10.1007/s11665-022-06993-0
Samarjit Singh, Sushil Kumar Singh, Pappu Kumar Harijan, Sunil Kumar Yadav, Abhishek Kumar, “Investigation on the effect of Fe impurity pickups during ball milling and Ni dispersion on the microwave absorption performance of ball milled Fe impurities-Ni/SiC composites”, Journal of Materials Science: Materials in Electronics, 33, 17828-17841 (2022). (SCI: Impact factor-2.779) https://doi.org/10.1007/s10854-022-08647-2
Prabhakar Kumar, Deeksha Gupta, Ashish Dubey, Abhishek Kumar “Utilization of Zn-dispersed waste materials for realizing thin meta-structure with improved microwave absorption”, Composites: Mechanics, Computations, Applications: An International Journal, 14(2):39–55 (2023). (ESCI, Scopus Indexed) https://doi.org/10.1615/CompMechComputApplIntJ.2022044803
Amit Kumar Singh Chauhan, Mukul Shukla, Abhishek Kumar, “3D Thermal Simulation of Powder Bed Fusion Additive Manufacturing of Stainless Steel” International Journal on Interactive Design and Manufacturing, Accepted 2023. (Scopus Indexed)
Naveen Kumar, Ajaya Bharti, Abhishek Kumar, Ritesh Kumar Kushwaha, Kunvar Kant Patel, “Nano material coatings for bio implant applications: A re-analysis” Materials Physics and Mechanics, Accepted. (ESCI, Scopus Indexed)
Avadesh Yadav, Sourabh Kumar, Sreetam Das, Satish Kumar and Abhishek Kumar, “Shape recovery and mechanical properties investigation of carbon fiber dispersed Bisphenol-A based epoxy composite” Smart Materials and Structures, 32 (9) 095016, 2023 (SCIE: Impact factor-4.131) https://doi.org/10.1088/1361-665X/aceb27
Samarjit Singh, Sushil Kumar Singh, Abhishek Kumar & Biplab Das “Influence of Reduced Graphene Oxide Flakes Addition on the Electromagnetic Wave Absorption Performance of Silicon Carbide-Based Wave Absorber” JOM: The Journal of The Minerals, Metals & Materials Society (TMS) 2023 (SCI: Impact factor-2.6) https://doi.org/10.1007/s11837-023-06222-6

Conference Proceedings:

Sushil Kumar Singh, Samarjit Singh, Sourabh Shukla, Abhishek Kumar and Anuj Jain, “Influence of SiO2 nanoparticle reinforcement on the thermo-mechanical behavior of two different epoxy composite systems: A comparative study”, in International Conference on Sustainable Engineering” (ICSE-2021) organized by Government Engineering College Bikaner, Rajasthan, held on 26 – 27 February, 2021.
Samarjit Singh, Sushil Kumar Singh, Rahul Singh, Abhishek Kumar, “Ball milled Ni dispersed SiC composites for improved microwave absorption response”, in International Conference on Sustainable Engineering” (ICSE-2021) organized by Government Engineering College Bikaner, Rajasthan, held on 26 – 27 February, 2021.
Rahul Singh, Samarjit Singh, B Kranthi Kumar, Abhishek Kumar, “Mechanical behaviour and corrosion study of 304L austenitic steel processed by constrained groove pressing”, in International Conference on Sustainable Engineering” (ICSE-2021) organized by Government Engineering College Bikaner, Rajasthan, held on 26 – 27 February, 2021.
Sushil Kumar Singh, Amit Kumar, Samarjit Singh, Abhishek Kumar and Anuj Jain, “Investigation of thermo-mechanical properties of surface treated SiO2/epoxy nanocomposite”, in the International Conference & Exposition on Mechanical, Material and Manufacturing Technology” (ICE3MT2020) organized by CVR College of Engineering Hyderabad, held on 9-10 October, 2020. https://doi.org/10.1016/j.matpr.2020.09.137 (Best Paper Award)
Rahul Singh, Surya Deo Yadav, Nikhil Malviya, Sunkulp Goel, R. Jayaganthan & Abhishek Kumar, “Finite element analysis and Mechanical behavior of 316L stainless steel processed by room temperature” in international conference “ICRAMMT – 2018” organized by MLRITM, Hyderabad, Telangana, held on 19-20 November 2018.
Rahul Singh, Gaurav Rajan, B. Kranthi Kumar, Raviraj Verma, R. Jayaganthan & Abhishek Kumar, “Numerical analysis of constrained groove pressing and mechanical behaviour of processed 316L stainless” in international conference “ICRAMMT – 2018” organized by MLRITM, Hyderabad, Telangana, held on 19-20 November, 2018.
Yogesh Iyer Murthy, Sumit Gandhi, Abhishek Kumar, “A critical Review on the use of sugarcane bagasse ash in cement mortar and concrete”, Recent Development in Cement Composites, (RDCC-2018), 24-25th Aug. 2018.
Rahul Singh, Deepak Sachan, Raviraj Verma, Sunkulp Goel, Abhishek Kumar, “Mechanical behavior of 304 austenitic stainless steel processed by cryogenic rolling”, AMPCO 2017 at IIT Roorkee, Nov. 30- Dec. 2, 2017. (https://doi.org/10.1016/j.matpr.2018.04.090)
Rahul Singh, I. K. Bhat, Raviraj Verma, R. Jayaganthan, Abhishek Kumar, “Effect of processing temperature over the mechanical behaviour of 304 austenitic stainless steel”, NMD-ATM 2017 at Pune (The Indian Institute of Metals), November 11-14, 2017.
Rahul Singh, Deepak Sachan, Sunkulp Goel, R. Jayaganthan, Abhishek Kumar, “Effect of temperature over the mechanical behaviour of Titanium alloy (Ti06Al-4V)”, NMD-ATM 2017 at Pune (The Indian Institute of Metals), November 11-14, 2017.
Sushil Kumar Singh, Abhishek Kumar and Anuj Jain, “Unveiling the impact of ZrO2 dispersion over the mechanical behavior of epoxy resin”, NMD-ATM 2017 at Pune (The Indian Institute of Metals), November 11-14, 2017.
Deepak Singh, Sushil Kumar Singh, Abhishek Kumar and Anuj Jain, “A Finite Element Approach to Determine Young’s Modulus of Epoxy-Silica Nanocomposite”, NMD-ATM 2017 at Pune (The Indian Institute of Metals), November 11-14, 2017.
Abhishek Kumar, Samarjit Singh and Dharmendra Singh, “Development of Double Layer Microwave Absorber using Genetic Algorithm”, IOP Conf. Ser.: Mater. Sci. Eng. 234 012009; ATDMAE 2017at Nanyang Technical Unversity, Singapore during July 12-14, 2017. (https://doi.org/10.1088/1757-899X/234/1/012009; ISSN: 1757-8981)
Samarjit Singh, Ankur Sinha, Raj Hemant Zunke, Abhishek Kumar and I.K. Bhat, “AHP based TOPSIS and VIKOR analysis for selection of EM wave absorbers at X-band”, INCAM 2017 at MNNIT Allahabad during July 5-7, 2017.
Abhishek Kumar and Samarjit Singh, “Development of Coatings for Radar Absorbing Materials at X-Band”, IOP Conf. Ser.: Mater. Sci. Eng. 330, 012006; International Conference on Recent Advances in Materials, Mechanical and Civil Engineering (ICRAMMCE-2017) held at Marri Laxman Reddy Institute of Technology and Management, Hyderabad during June 01-02, 2017. (https://doi.org/10.1088/1757-899X/330/1/012006)
Sushil Kumar Singh, Abhishek Kumar and Anuj Jain, “Effect of Nanoparticles Dispersion on Viscoelastic Properties of Epoxy–Zirconia Polymer Nanocomposites”, IOP Conf. Ser.: Mater. Sci. Eng. 330, 012001; International Conference on Recent Advances in Materials, Mechanical and Civil Engineering (ICRAMMCE-2017) held at Marri Laxman Reddy Institute of Technology and Management, Hyderabad during June 01-02, 2017. (https://doi.org/10.1088/1757-899X/330/1/012001)
Yogesh Iyer Murthy, Sumit Gandhi and Abhishek Kumar, “Corrosion Prevention of Steel Reinforcement in 7.5% NaCl Solution Using Pure Magnesium Anode”, IOP Conf. Ser.: Mater. Sci. Eng. 330, 012003; International Conference on Recent Advances in Materials, Mechanical and Civil Engineering (ICRAMMCE-2017) held at Marri Laxman Reddy Institute of Technology and Management, Hyderabad during June 01-02, 2017. (https://doi.org/10.1088/1757-899X/330/1/012003)
Rahul Singh, Sukulp Goel, Raviraj Verma, R.Jayaganthan and Abhishek Kumar, “Mechanical behavior of 304 Austenitic stainless steel processed by Room temperature rolling”, IOP Conf. Ser.: Mater. Sci. Eng. 330, 012017; International Conference on Recent Advances in Materials, Mechanical and Civil Engineering (ICRAMMCE-2017) held at Marri Laxman Reddy Institute of Technology and Management, Hyderabad during June 01-02, 2017. (https://doi.org/10.1088/1757-899X/330/1/012017)
Dharmendra Singh, P.Nageswararao, A. Kumar Chauhan and S.K. Rajput, “Microstructure, mechanical and corrosion behavior of Al 5083 alloy processed by multi directional forging at cryogenic temperature”, International Conference on Recent Advances in Materials, Mechanical and Civil Engineering (ICRAMMCE-2017) held at Marri Laxman Reddy Institute of Technology and Management, Hyderabad during June 01-02, 2017.
Sushil Kumar Singh, Abhishek Kumar and Anuj Jain, “Improving tensile and flexural properties of SiO2-epoxy polymer nanocomposite”, International conference on Materials Processing and Characterization (ICMPC-2017) organized by GRIET Hyderabad, during 17-19 March, 2017. (https://doi.org/10.1016/j.matpr.2017.12.243)
Bandana Rajpoot, Sushil Kumar Singh, Abhishek Kumar, and Anuj Jain, “Development of SiO2-epoxy nano-composites and their thermo-mechanical properties”, International Conference on Nanomaterials and Nanotechnology (ICNANO-2017) organised by International Association of Advanced Materials (IAAM) in collaboration with VBRI Press AB, Sweden during 01 - 03 March, 2017 at Vinoba Bhave Research Institute, Allahabad, India. (DOI: 10.5185/amp.2020.020401; ISSN: 2002-4428)
Samarjit Singh, Gaurav Goswami and Abhishek Kumar, “Influence of pH and calcination temperature on magnetic properties of nanosized Zn-ferrite synthesized by sol- gel citrate method” International conference on emerging trends in nanomaterials science & technology (ICETNMST-2017) held at NIT Nagaland during 4-6 January, 2017. (https://doi.org/10.15623/ijret.2017.0613006)
Sushil Kumar Singh, Amit Kumar, Samarjit Singh, Abhishek Kumar and Anuj Jain, “Effect of surface treatment of SiO2-nanoparticles on mechanical properties of epoxy-nanocomposites” International conference on emerging trends in nanomaterials science & technology (ICETNMST-2017) held at NIT Nagaland during 4-6 January, 2017.
Kumar, A., Singh, S. “Design of two-layer microwave absorber at X-band using genetic algorithm”, 11th International Conference on Industrial and Information Systems (ICIIS-2016) 03rd-04th, December 2016, Conference Proceedings, pp. 503-506, January- 2018.
Dharmendra Singh, P.N.Rao, A. Kumar, P.K. Gupta, D. Venketeswarlu, “Effect of initial grain size on microstructure and mechanical behavior of cryorolled 5083 AA”, International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016) held at MLRIT Dundigal (Hyderabad) India during June 26-28, 2016. (https://doi.org/10.1016/j.matpr.2017.07.094 ISSN: 2214-7853)
Sushil Kumar Singh, Samarjit Singh, Raunak Kohli, Anuj Jain and Abhishek Kumar, “Effect of TiO2 Dispersion on Mechanical Properties of Epoxy Polymer”, International Conference on Condensed Matter & Applied Physics (ICC-2015) held at Bikaner (Rajasthan) India during October 30-31, 2015. (http://dx.doi.org/10.1063/1.4946637)
Z. Vakil, A. Kumar, A. Jain, K. M. Gupta, Mohd Najim, D. Singh, “Effect of Cerium (Ce 3+) doping on structural, magnetic and dielectric properties of Barium Ferrite (BaFe12O19)”, IEEE International Conference on Electrical, Computer and Communication Technologies (ICECCT), 2015 held at SVS College of Engineering JP Nagar Arasampalayam Pollachi Coimbatore, India during March 05-07, 2015. (DOI: 10.1109/ICECCT.2015.7225982)
Abhishek Kumar, Vijaya Agarwala and Dharmendra Singh, “Effect of Co substitution on microwave absorption of BaFe12O19” at International Conference “The Minerals, Metals & Materials Society, 143rd Annual Meeting & Exhibition” held at San Diego, California, USA during February 16-20, 2014.
Abhishek Kumar, Vijaya Agarwala, Dharmendra Singh and Rajkumar Jani, “Effect of Silicon Carbide Morphology on Dielectric Properties at X-band”, at 57th DAE Solid State Physics Symposium (SSPS-DAE 2012) held at Indian Institute of Technology - Bombay, Mumbai, during December 3-7, 2012.
Abhishek Kumar, Vijaya Agarwala and Dharmendra Singh, “Effect of Mg substitution on microwave absorption of BaFe12O19” at International Conference on Advances in Materials and Processing Challenges and Opportunities (AMPCO-2012) held at IIT Roorkee, during November 2-4, 2012.
Abhishek Kumar, Vijaya Agarwala and Dharmendra Singh, “Effect of calcination temperatures on morphology and microwave absorption properties of SiC”, at International Conference on Material Science and Technology (ICMST-2012) held at Kottayam, Kerala during June 10-14, 2012.
Abhishek Kumar, Vijaya Agarwala and Dharmendra Singh, “Synthesis, Reaction Kinetic and Microwave Absorption Studies of BaFe12O19 Nanocrystals”, at International Conference on Functional Materials for Defence (ICFMD-2012) held at Defence Institute of Advanced Technology, Pune during May 18-22, 2012.
Abhishek Kumar, Gaurav Goswami and I K Bhat “Prediction of Fatigue Crack Growth in Al-alloys using Artificial Neural Network” 5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2010) from 27th -29th December, 2010 at IIT Kharagpur.
Manoj Maurya, Abhishek Kumar and I K Bhat “An experimental comparative study of cyclic creep behavior on different commercially available Al alloys” 5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2010) from 27th -29th December, 2010 at IIT Kharagpur.
Abhishek Kumar, Suneel Kumar and I K Bhat “Effect of Cooling Rates on Cyclic Creep Behaviour on Al 1100 and Cu C2300 alloy” 5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2010) from 27th -29th December, 2010 at IIT Kharagpur.
Aftab Alam, Abhishek Kumar “Finite Element Analysis of K-dominance region for functionally graded materials” 4th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM-2007) and Reunion of the Aerospace Engineering Graduates of IIT Kharagpur, from 27th -29th December, 2007 at IIT Kharagpur.
Samarjit Singh and Abhishek Kumar, “Improved Microwave Absorption Response of Ball Milled Ni Dispersed SiC Composites”, 4th Prof. Vijaya Agarwala Memorial National Conference on Microwave Absorbing Materials (VAMMAM-2020) organized by IIT Roorkee and MNNIT-Allahabad, during August 23rd -24th, 2020
Abir Roy and Abhishek Kumar, “Corrosion Behaviour of Multiaxial Compressed Al-Mg-Si Alloy”, 4th Prof. Vijaya Agarwala Memorial National Conference on Microwave Absorbing Materials (VAMMAM-2020) organized by IIT Roorkee and MNNIT-Allahabad, during August 23rd -24th, 2020
Harikesh, S. D. Yadav and Abhishek Kumar, “Modelling of Tensile Flow and Work Hardening Behaviour of Stainless Steel Using a Dislocation Density-Based Model”, 4th Prof. Vijaya Agarwala Memorial National Conference on Microwave Absorbing Materials (VAMMAM-2020) organized by IIT Roorkee and MNNIT-Allahabad, during August 23rd -24th, 2020
Rahul Singh, Samarjit Singh, Balina Kranthi Kumar and Abhishek Kumar, “Study of Mechanical and Corrosion Behaviour of Constrained Groove Pressed Austenitic Steel-304L”, 4th Prof. Vijaya Agarwala Memorial National Conference on Microwave Absorbing Materials (VAMMAM-2020) organized by IIT Roorkee and MNNIT-Allahabad, during August 23rd -24th, 2020
Sushil Kumar Singh, Abhishek Kumar and Anuj Jain, “Impact of SiO2 Nanoparticle Weight Fraction on Mechanical Properties of Two Epoxy Polymers”, 4th Prof. Vijaya Agarwala Memorial National Conference on Microwave Absorbing Materials (VAMMAM-2020) organized by IIT Roorkee and MNNIT-Allahabad, during August 23rd -24th, 2020
Rahul Singh, Surya Deo Yadav, Biraj Kumar Sahoo, Sandip Ghosh Chowdhury and Abhishek Kumar, “Phase transformation, mechanical properties and corrosion behavior of 304L austenitic stainless steel rolled at room and cryo temperature”, 4th Prof. Vijaya Agarwala Memorial National Conference on Microwave Absorbing Materials (VAMMAM-2020) organized by IIT Roorkee and MNNIT-Allahabad, during August 23rd -24th, 2020
B. Kranthi Kumar, Rahul Singh and Abhishek Kumar, “Effect of nanoparticles dispersion in High entropy alloys: A brief review”, in national conference Industrial application of Nano-Science and Nano-Technology (IANN-2019) organized by MNNIT-Allahabad, held during November 15-16, 2019.
Sushma Yadav, Samarjit Singh, Abhishek Kumar, “Synthesis and Anti-bacterial Study of Zinc Oxide Doped Hydroxyapatite Nanocomposites with Potential Biomedical Applications”, in national conference Industrial application of Nano-Science and Nano-Technology (IANN-2019) organized by MNNIT-Allahabad, held during November 15-16, 2019.
Rahul Singh, Gaurav Rajan and Abhishek Kumar, “Parameters optimization of sliding wear of Cryogenically-rolled Austenitic steel using Taguchi method” in conference AEMSD – 2018 organized by NML-Jamshedpur, to be held on 18-19 January, 2019. (IInd Best Presentation)
Deepak Kumar, Kushagra Gupta, Sumit Soni, Virendra Kumar Gond, Rishi Tiwari and Abhishek Kumar, “Effect of nanoparticle dispersion on single lap shear strength of epoxy resin” in conference Polymers: Usefulness and Current Concerns, organized by MNNIT Allahabad, held during 23rd-24th December, 2018.
Samarjit Singh, Rahul Singh and Abhishek Kumar, “Effect of Ni microspheres on the dielectric behavior and microwave absorption performance of ZnO composites” in conference ANA-2018, organized by MNNIT Allahabad, held during 21st-23rd December, 2018.
Samarjit Singh, Abhishek Kumar Selection of core-shell thmaterial based electromagnetic wave absorbers in 2-18 GHz using TOPSIS and VIKOR ranking methods”, 2nd Prof. Vijaya Agarwala Memorial National Symposium on Microwave Absorbing Materials (VAMMAM-2018) from 24th to 25th Aug. 2018 at IIT Roorkee, India. (https://doi.org/10.14429/dsj.69.14946)
Saurabh, Anil Kumar Maurya, Samarjit Singh, Abhishek Kumar, “"Microwave absorption performance of graphene nanoplatelets dispersed SiC”, 2nd Prof. Vijaya Agarwala Memorial National Symposium on Microwave Absorbing Materials (VAMMAM-2018) from 24th to 25th Aug. 2018 at IIT Roorkee, India. (https://doi.org/10.14429/dsj.69.14947)
Sushil Kumar Singh, Abhishek Kumar and Anuj Jain, “Influence of Filler Dispersion on the mechanical Behavior of ZrO2 Dispersed Epoxy Nanocomposites” in conference “SWAYAM – 2018” organized by BITS Pilani, K.K.Birla Goa Campus, held during 04th-06th July, 2018.
Rahul singh, & Abhishek Kumar, “Impact of deformation route over Mechanical and magnetic behavior of austenitic stainless” in conference “SWAYAM – 2018” organized by BITS Pilani, K.K.Birla Goa Campus, held during 04th-06th July, 2018.
Samarjit Singh, Sushil Kumar Singh and Abhishek Kumar, “Material selection for nickel based microwave absorbing materials in 2-18 GHz frequency range using different Multi-Criteria Decision Making Methods” NMD-ATM 2016 held at Indian Institute of Technology Kanpur during 11-14 November, 2016.
Abir Roy, Rishi Shukla and Abhishek Kumar, “Mechanical behavior of Al 1xxx processed by Torsion” NMD-ATM 2016 held at Indian Institute of Technology Kanpur during 11-14 November, 2016. (Best Poster Award)
Abir Roy, Abhishek Kumar, Shashank Shekhar, “Mechanical behavior of Al 5083 processed by Constrained Groove Pressing”, in national conference on Product Design and Development at MNNIT Allahabad, during November 21-22, 2015.
Z. Vakil, Abhishek Kumar, Anuj Jain, K. M. Gupta, “Design and Simulation of thin film based self biased Coplanar Isolator”, RAECE-2015 held at Indian Institute of Technology Roorkee, during February 13-15, 2015.
Abhishek Kumar, Vijaya Agarwala and Dharmendra Singh, “Microwave Absorbing Properties of Metal-Particle Dispersed Al2O3”, at National Conference on Advances in National Materials (ADNAM-2013) held at National Institute of Ocean Technology, Chennai, during February 22-23, 2013.
Abhishek Kumar, Kolli Ganapathi, Dharmendra Singh and Vijaya Agarwala, “Radar Cross Section Measurements and Simulations of a regular shapes in the X-band”, at National Symposium on Space Technology for Food & Environmental Security and Annual Conventions of Indian Society of Remote Sensing and Indian Society of Geomatics during December 5-7, 2012, New Delhi.
Pappu Kumar, Abhishek Kumar “Preparation of nanocrystalline ZnCuMg ferrite powders synthesized by Sol-Gel method” National Conference on Smart, Electronic and Engineering Materials 2010 (SEEMs’10), from 5th-6th March, 2010, at BFCET, Bathinda.
Yogesh Iyer Murthy, Sumit Gandhi and Abhishek Kumar, “Crystallographic Study of Solid Solutions in The Mg-Ca-Nd Ternary System at 400 °C”, in the International Conference on Advancements in Interdisciplinary Research (AIR-2022) organized by MNNIT Allahabad, Prayagraj, held on 6-7 May 2022.
Sreetam Das, Sourabh Kumar Singh, Avadesh Yadav, Satish Kumar and Abhishek Kumar, “Finite Element Analysis of a Shape Memory Polymer for Space Actuator Applications”, in the International Conference on Advancements in Interdisciplinary Research (AIR-2022) organized by MNNIT Allahabad, Prayagraj, held on 6-7 May 2022.
Prabhakar Kumar, Deeksha Gupta and Abhishek Kumar, “Dispersion of Zn in waste material for microwave absorption property”, in the International Conference on Advancements in Interdisciplinary Research (AIR-2022) organized by MNNIT Allahabad, Prayagraj, held on 6-7 May 2022.
Prabhakar Kumar, Prashant Singh, Nigatu D. Tilahun, R. Sujithra, Abhishek Kumar, “Finite Element Analysis of Re-entrant and modified curved re-entrant auxetic structure for energy-absorption”, in the International Conference on Advancements in Interdisciplinary Research (AIR-2022) organized by MNNIT Allahabad, Prayagraj, held on 6-7 May 2022.
Sreetam Das, Sourabh Kumar Singh, Avadesh Yadav, Satish Kumar and Abhishek Kumar, “Finite Element Analysis of a Shape Memory Polymer for Space Actuator Applications”, in the International Conference on Advancements in Interdisciplinary Research (AIR-2022) organized by MNNIT Allahabad, Prayagraj, held on 6-7 May 2022.
Yogesh Iyer Murthy, Sumit Gandhi and Abhishek Kumar, “Crystallographic Study of Solid Solutions in The Mg-Ca-Nd Ternary System at 400 °C”, in the International Conference on Advancements in Interdisciplinary Research (AIR-2022) organized by MNNIT Allahabad, Prayagraj, held on 6-7 May 2022.